 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
clivesutton
Joined: 23 Jan 2013
Posts: 187
Location: KENILWORTH
|
 Posted: Sat Mar 11, 2017 9:11 am Post subject: MOD sheets? |
 |
|
Hi, on the final inspection prep run now and checking off each required MOD with the LAA list against what's on the a/c.
But can't find anything on the EC or Europa websites for the following MOD's - Does anyone have/can send me, copies please?
MOD 15 - FWD Lift Pin Fuselage Strengthening
MOD 16 - Shock Absorber Block Shape
MOD 17 - Rudder Pedal guides
MOD46 - Pitch Torque Tube End Cap
clive.maf(at)googlemail.com
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
pjeffers(at)talktalk.net
Guest
|
| Posted: Sun Mar 12, 2017 1:33 am Post subject: MOD sheets? |
|
|
Hi Clive,
If you really want them I could email them to you but their applicability to
your a/c is largely dependent upon whether your kit is classic or XS.
I have left a voice message on your mobile with my phone number if you wish
to talk about it.
Pete Jeffers Europa Club LAA Inspector
--
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
neveyre(at)aol.com
Guest
|
| Posted: Sun Mar 12, 2017 9:25 am Post subject: MOD sheets? |
|
|
Hi Clive,
Hope this goes through, my posts have gone MIA before
Mod 15, the ''top hat'' lay up of 3 Bids over 3'' x 1/4'' blue foam, vertical from door sill to thigh support, centred over lift socket.
Mod 16, original block was a rectangular ''brick'', needs a V cutting out of upper and lower faces [ bear to do, get a new one from Europa].
Mod 17, without my notes can't be sure, might be the 5/8'' tubes [CS31] Reduxed into the pedal pivot tubes ?
Mod 46 Pitch torque tube originally had the solid bearings [ as per aileron control system] replaced with a spherical [ self aligning] bearing and beefier cap.
All these were very early on.
Tip, when you submit the paperwork to LaaLaaLand, list EVERY MOD, and mark as N/A as [ for instance] a Trigear application will be returned if the mono wheel block, Mod 16 hasn't been done..... DOH !
Cheers,
Nev
--
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
clivesutton
Joined: 23 Jan 2013
Posts: 187
Location: KENILWORTH
|
| Posted: Mon Mar 13, 2017 11:25 am Post subject: Re: MOD sheets? |
|
|
Hi Nev, many thanks for your reply - i've emailed you a reply direct/off list
Clive
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
