mercecedes116(at)gmail.co
Guest
|
 Posted: Mon Mar 13, 2017 5:10 pm Post subject: Kolb-List Digest: 11 Msgs - 03/06/17 |
 |
|
Hi everyone.Earlier I reported a challenger crash as being in Oakvale Calif. It was in Oakdale Modesto Bee paper. Godawful story.
On Tue, Mar 7, 2017 at 3:03 AM, Kolb-List Digest Server <kolb-list(at)matronics.com (kolb-list(at)matronics.com)> wrote:
| Quote: | *
==================================================
Online Versions of Today's List Digest Archive
==================================================
Today's complete Kolb-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Kolb-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2017-03-06&Archive=Kolb
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2017-03-06&Archive=Kolb
================================================
EMail Version of Today's List Digest Archive
================================================
----------------------------------------------------------
Kolb-List Digest Archive
---
Total Messages Posted Mon 03/06/17: 11
----------------------------------------------------------
Today's Message Index:
----------------------
1. 07:16 AM - Re: ANYONE near Southern California so can look at a Mark III (B Young)
2. 07:19 AM - Re: ANYONE near Southern California so can look at a Mark III (B Young)
3. 07:38 AM - Video (B Young)
4. 07:55 AM - Re: ANYONE near Southern California so can look at a Mark III (Bill Berle)
5. 08:41 AM - Re: Video (Larry Cottrell)
6. 08:45 AM - Re: Video (B Young)
7. 09:21 AM - Re: Video (Rick Neilsen)
8. 09:32 AM - Re: Video (Larry Cottrell)
9. 01:17 PM - Re: Video (west1m)
10. 07:52 PM - Re: Video (Richard Pike)
11. 08:03 PM - Vodeo (B Young)
________________________________ Message 1 _____________________________________
Time: 07:16:16 AM PST US
From: B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)>
Subject: Re: ANYONE near Southern California so can look at a Mark III
Video https://vimeo.com/user29057193/flying-the-bear-river
________________________________ Message 2 _____________________________________
Time: 07:19:43 AM PST US
From: B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)>
Subject: Re: ANYONE near Southern California so can look at a Mark III
Sorry the previous email should have been off list. If you want to watch
video the password is. beekeeper
https://vimeo.com/user29057193/flying-the-bear-river
Boyd
________________________________ Message 3 _____________________________________
Time: 07:38:40 AM PST US
From: B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)>
Subject: Video
Ok someone contacted me and said no joy on the video..... It worked for
me maybe because I was checked into the account......
Try this
https://vimeo.com/119686841
Password is beekeeper
On Mar 6, 2017 8:19 AM, "B Young" <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
Sorry the previous email should have been off list. If you want to watch
video the password is. beekeeper https://vimeo.com/
user29057193/flying-the-bear-river
Boyd
________________________________ Message 4 _____________________________________
Time: 07:55:27 AM PST US
From: Bill Berle <victorbravo(at)sbcglobal.net (victorbravo(at)sbcglobal.net)>
Subject: Re: ANYONE near Southern California so can look at a Mark
III
I am in Southerm CA and can go look at whatever Mark 3 is being discussed if it
is helpful.
Bill Berle 818-six34-9seven62
Bill Berle
www.ezflaphandle.com - safety & performance upgrade for light aircraft
www.grantstar.net - winning proposals for non-profit and for-profit entities
--------------------------------------------
On Mon, 3/6/17, B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
Subject: Re: ANYONE near Southern California so can look at a Mark
III
To: "Kolb List" <kolb-list(at)matronics.com (kolb-list(at)matronics.com)>
Date: Monday, March 6, 2017, 7:19 AM
Sorry the previous
email should have been off list. If you want to watch
video the password is. beekeeper https://vimeo.com/user29057193/flying-the-bear-river
Boyd
________________________________ Message 5 _____________________________________
Time: 08:41:20 AM PST US
From: Larry Cottrell <lcottrell1020(at)gmail.com (lcottrell1020(at)gmail.com)>
Subject: Re: Video
I was able to view it ok. I assume from the small size of the picture that
it was originally made with "Movie Maker", would that be right? I am not
sure why they want to shrink the size of the video's, but that is why I
quit using it.
It looks nice and smooth, something that I could not obtain from a wing
strut mounting. I recall telling Bill B that a mount on the wing strut
would not work. It appears that I am going to have to qualify that to say
that it won't work on a Firestar II. Oh well!
Larry
On Mon, Mar 6, 2017 at 8:38 AM, B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
> Ok someone contacted me and said no joy on the video..... It worked for
> me maybe because I was checked into the account......
>
> Try this
>
> https://vimeo.com/119686841
>
> Password is beekeeper
>
> On Mar 6, 2017 8:19 AM, "B Young" <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
>
> Sorry the previous email should have been off list. If you want to watch
> video the password is. beekeeper
> https://vimeo.com/user29057193/flying-the-bear-river
>
> Boyd
>
>
--
*The older I get, the less tolerant I am of those who are intolerant of
others.*
*If you forward this email, or any part of it, please remove my email
address before sending.*
________________________________ Message 6 _____________________________________
Time: 08:45:41 AM PST US
From: B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)>
Subject: Re: Video
OK what editing software should I replace movie maker with?
On Mar 6, 2017 9:43 AM, "Larry Cottrell" <lcottrell1020(at)gmail.com (lcottrell1020(at)gmail.com)> wrote:
> I was able to view it ok. I assume from the small size of the picture that
> it was originally made with "Movie Maker", would that be right? I am not
> sure why they want to shrink the size of the video's, but that is why I
> quit using it.
>
> It looks nice and smooth, something that I could not obtain from a wing
> strut mounting. I recall telling Bill B that a mount on the wing strut
> would not work. It appears that I am going to have to qualify that to say
> that it won't work on a Firestar II. Oh well!
> Larry
>
> On Mon, Mar 6, 2017 at 8:38 AM, B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
>
>> Ok someone contacted me and said no joy on the video..... It worked
>> for me maybe because I was checked into the account......
>>
>> Try this
>>
>> https://vimeo.com/119686841
>>
>> Password is beekeeper
>>
>> On Mar 6, 2017 8:19 AM, "B Young" <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
>>
>> Sorry the previous email should have been off list. If you want to
>> watch video the password is. beekeeper
>> https://vimeo.com/user29057193/flying-the-bear-river
>>
>> Boyd
>>
>>
>>
>
>
> --
> *The older I get, the less tolerant I am of those who are intolerant of
> others.*
>
> *If you forward this email, or any part of it, please remove my email
> address before sending.*
>
________________________________ Message 7 _____________________________________
Time: 09:21:33 AM PST US
From: Rick Neilsen <neilsenrm(at)gmail.com (neilsenrm(at)gmail.com)>
Subject: Re: Video
Boyd
The video is great. send us more.
I use movie maker and it has always produced larger size picture. I'm not
real proficient with movie maker and it seems like vimeo tells me there is
a better resolution to use but I get the large picture and it looks great
so I haven't fixed it. Seems like I just set the publishing settings as
movie maker recommended for vimeo.
I tried a bunch of different mounts and the wing strut mount (right at the
jury strut attachment) works best for my MKIIIC. My camera has a real wide
field of view so I get the leading edge of the wing. If I point it down
more the video looks strange and has more of the rolling effect.
Rick Neilsen
Redrive VW Powered MKIIIC
On Mon, Mar 6, 2017 at 10:38 AM, B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
> Ok someone contacted me and said no joy on the video..... It worked for
> me maybe because I was checked into the account......
>
> Try this
>
> https://vimeo.com/119686841
>
> Password is beekeeper
>
> On Mar 6, 2017 8:19 AM, "B Young" <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
>
> Sorry the previous email should have been off list. If you want to watch
> video the password is. beekeeper
> https://vimeo.com/user29057193/flying-the-bear-river
>
> Boyd
>
>
________________________________ Message 8 _____________________________________
Time: 09:32:37 AM PST US
From: Larry Cottrell <lcottrell1020(at)gmail.com (lcottrell1020(at)gmail.com)>
Subject: Re: Video
http://www.cyberlink.com/stat/edms/ppc/video-editing-software/powerdirector/15/30-30-45P_72hr/us/index_adr_bot-t_cp_bun.jsp
I am using version 12, which I do not see as available. I stayed with that
as I do not need all the various bells and gimmicks that the later versions
enable. There are free versions of several editors available. I cannot say
what they are like however.
You could just buy a new Virb Elite and get a movie editor with the camera.
The virb , to my eye, seems to have the best clarity of all the camera's
that I have tried. It comes with a remote or you can just set it to record
when the plane is moving and not worry about it. Three hour battery comes
with it.
I think the camera is worth it even if I do not turn it into a movie for
others to see, in that I can display it on my TV for the wife to see.
Perhaps you can find out why Movie Maker only gives you a small 6x8 picture
rather than a full screen. It used to be full screen, then changed. The
quality of the finished project is not as good as it would be with another
editing program however. Then again- it is free!
Larry
On Mon, Mar 6, 2017 at 9:45 AM, B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
> OK what editing software should I replace movie maker with?
> On Mar 6, 2017 9:43 AM, "Larry Cottrell" <lcottrell1020(at)gmail.com (lcottrell1020(at)gmail.com)> wrote:
>
>> I was able to view it ok. I assume from the small size of the picture
>> that it was originally made with "Movie Maker", would that be right? I am
>> not sure why they want to shrink the size of the video's, but that is why I
>> quit using it.
>>
>> It looks nice and smooth, something that I could not obtain from a wing
>> strut mounting. I recall telling Bill B that a mount on the wing strut
>> would not work. It appears that I am going to have to qualify that to say
>> that it won't work on a Firestar II. Oh well!
>> Larry
>>
>> On Mon, Mar 6, 2017 at 8:38 AM, B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
>>
>>> Ok someone contacted me and said no joy on the video..... It worked
>>> for me maybe because I was checked into the account......
>>>
>>> Try this
>>>
>>> https://vimeo.com/119686841
>>>
>>> Password is beekeeper
>>>
>>> On Mar 6, 2017 8:19 AM, "B Young" <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
>>>
>>> Sorry the previous email should have been off list. If you want to
>>> watch video the password is. beekeeper
>>> https://vimeo.com/user29057193/flying-the-bear-river
>>>
>>> Boyd
>>>
>>>
>>>
>>
>>
>> --
>> *The older I get, the less tolerant I am of those who are intolerant of
>> others.*
>>
>> *If you forward this email, or any part of it, please remove my email
>> address before sending.*
>>
>
--
*The older I get, the less tolerant I am of those who are intolerant of
others.*
*If you forward this email, or any part of it, please remove my email
address before sending.*
________________________________ Message 9 _____________________________________
Time: 01:17:24 PM PST US
Subject: Re: Video
From: "west1m" <west1m(at)hotmail.com (west1m(at)hotmail.com)>
Great movie, hope to see more.
Thanks for posting it.
--------
West1m
Hastings, MN
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=466949#466949
________________________________ Message 10 ____________________________________
Time: 07:52:52 PM PST US
Subject: Re: Video
From: "Richard Pike" <thegreybaron(at)charter.net (thegreybaron(at)charter.net)>
Nice, thank you.
--------
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0
Forgiving is tough. Being forgiven is wonderful.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=466954#466954
________________________________ Message 11 ____________________________________
Time: 08:03:25 PM PST US
From: B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)>
Subject: Vodeo
Here is another. 2 to 3 years old.
Password is beekeeper
https://vimeo.com/98587855
====================================
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Kolb-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
====================================
WIKI -
errer" target="_blank">http://wiki.matronics.com
====================================
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
