![Matronics Email Lists Forum Index](templates/Matronics/images/logo_phpBB.gif) |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
bakerocb
Joined: 15 Jan 2006 Posts: 727 Location: FAIRFAX VA
|
Posted: Tue Apr 04, 2017 11:25 am Post subject: KIS TR-1 Main Landing Gear Wheel Pant |
|
|
4/4/2017
Hello Again Steve, Here are the remainder of the KIS TR-1 landing gear pant
photos that I have promised you:
0136: This is a pic of the right main landing gear pant which was supplied
(along with attaching hardware) by Van's. All projecting interface fairing
with the landing gear strut fairing was created by me by molding fiberglass
over clay. The main landing gear strut fairing (not pictured) also came from
Van's.
0138: This pic shows the two halves of the pant (forward and aft). Yeah, I
know that the hole for access to the tire air filler valve is a little
ragged.## It is hard to hit that location precisely. I could grind it into a
perfect circle and come up with a manufactured cover for the hole, but I
have been using the same 2 inch wide white 3M glider assembly tape to cover
that hole that I use to close the trailing edges of the Van's provided main
landing gear strut fairings and it works great.**
Any questions?
OC
##PS: If you install wheel pants you will have to come up with some sort of
removable valve extension in order to test, and if needed, refill your tires
with air. Pulling the wheel pants off every time that you want to check /
refill tire air status is not a good plan.
**PS: See here:
https://www.amazon.com/dp/B00AQ29P62/ref=biss_dp_t_buying_options
or less expensive here:
http://www.cumulus-soaring.com/bowlus.htm
==================================
From: pastormac(at)comcast.net
Sent: Sunday, April 02, 2017 3:26 PM
To: kis-list(at)matronics.com
Subject: Re: Wheel pants?
Thank you! I'm going to pursue getting them on!
To our success, Stephen McIntosh
| - The Matronics KIS-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
Description: |
|
Filesize: |
708.17 KB |
Viewed: |
3701 Time(s) |
![000_0136.JPG](files/000_0136_155.jpg)
|
Description: |
|
Filesize: |
672.48 KB |
Viewed: |
3701 Time(s) |
![000_0138.JPG](files/000_0138_925.jpg)
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
pastormac62
Joined: 07 Sep 2015 Posts: 71 Location: Indiana
|
Posted: Tue Apr 04, 2017 3:54 pm Post subject: KIS TR-1 Main Landing Gear Wheel Pant |
|
|
Thank you!! Looks great!!
To our success, Stephen McIntosh
Quote: | On Apr 4, 2017, at 3:24 PM, Owen Baker <bakerocb(at)cox.net> wrote:
4/4/2017
Hello Again Steve, Here are the remainder of the KIS TR-1 landing gear pant photos that I have promised you:
0136: This is a pic of the right main landing gear pant which was supplied (along with attaching hardware) by Van's. All projecting interface fairing with the landing gear strut fairing was created by me by molding fiberglass over clay. The main landing gear strut fairing (not pictured) also came from Van's.
0138: This pic shows the two halves of the pant (forward and aft). Yeah, I know that the hole for access to the tire air filler valve is a little ragged.## It is hard to hit that location precisely. I could grind it into a perfect circle and come up with a manufactured cover for the hole, but I have been using the same 2 inch wide white 3M glider assembly tape to cover that hole that I use to close the trailing edges of the Van's provided main landing gear strut fairings and it works great.**
Any questions?
OC
##PS: If you install wheel pants you will have to come up with some sort of removable valve extension in order to test, and if needed, refill your tires with air. Pulling the wheel pants off every time that you want to check / refill tire air status is not a good plan.
**PS: See here:
https://www.amazon.com/dp/B00AQ29P62/ref=biss_dp_t_buying_options
or less expensive here:
http://www.cumulus-soaring.com/bowlus.htm
==================================
From: pastormac(at)comcast.net
Sent: Sunday, April 02, 2017 3:26 PM
To: kis-list(at)matronics.com
Subject: Re: Wheel pants?
Thank you! I'm going to pursue getting them on!
To our success, Stephen McIntosh
<000_0136.JPG>
<000_0138.JPG>
|
| - The Matronics KIS-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|