Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Wing Fairings

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

Kelvin Weston

Joined: 14 Apr 2010
Posts: 90
Location: Hampshire, UK

Posted: Sat May 27, 2017 11:35 pm Post subject: Wing Fairings

Hi All



Started looking at fitting the root fairings to the wings yesterday.

But the supplied fairings do not fit particularly well and will need some extensive work with a heat gun to remove the twists and bulges.



Has anybody created fairings by glassing directly to the wing ?



It would not take long to create a radius with some foam and by staggering the overlap on the wing, it might avoid some of the problems with filling the step created when using the pre-moulded fairing.



The supplied fairing is 1.3mm to 1.5mm thick which equates to about 4 or 5 layers of BID I think.



Any thoughts ?

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Regards

Kelv Weston
Kit 497
kelv@kdweston.co.uk

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum