dan(at)syz.com
Guest
|
 Posted: Wed Jun 07, 2017 11:58 am Post subject: SL-70 Install /Configuration issues -> Installation Manual |
 |
|
First of all, I have to say I don't know anything about the SL-70. But I thought I'd just mention one possibility - if you see bursts of unintelligible data, that's often indicative of a non-matching baud rate. Do you know for sure that the SL-70 transmits its data at 1200 bps? That's actually a fairly slow rate... again, without knowing the specs of the SL-70, I'd expect higher - like maybe around 9600. If you're not sure of the baud rate, try higher rates and see if you find one that gives intelligible data.
Dan
| Quote: | Does anyone out there know how to 'capture' the RS-232 data as it is transmitted from the SL-70 in a readable format? I have a serial port on my computer connected to the TX pin from the SL-70 and set to 1200, 8, 1, N in HYPERTERM (old Windows software). It does capture the 'bursts' of data but the results are unintelligible on the software screen. The SL-70 Install Manual gives me a good idea about what I 'should' be seeing. Maybe I need special settings or special software!
Any help or suggestions greatly appreciated!
Thanks,
Ralph Capen
|
---
Dan Charrois
President, Syzygy Research & Technology
Phone: 780-961-2213
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
