Matronics Email Lists :: View topic - Tosten grip wiring with car-relay for trim

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Tosten grip wiring with car-relay for trim

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckolls.bob(at)aeroelect
Guest

Posted: Tue Jun 20, 2017 6:46 pm Post subject: Tosten grip wiring with car-relay for trim

At 10:01 AM 6/20/2017, you wrote:

  	  Quote: 	
		  --> AeroElectric-List message posted by: "Achille" <mickael.t(at)live.fr>



 Hello,



 I want to wire my new grip tosten with my basic 12v electrical actuating as trim (up/down) pulling a spring. 



 I bought a double car relay to do some test to find the good wiring diagram but before that I prefer asking in this forum how can I wire it if anybody know the response ? 



 Before I was a double pole switch, wire by the previous owner. 



 I had a problem with the previous wiring, when i actuated my trim, my compas begin to turn completely. The motor/switch were not close to the compas. 



 I have tested to set the motor very close to the compas to do a test. Without all the wire juste motor and a small battery. And in this case it don't turn ! I don't understand why. 	


   It's difficult to diagnose the underlying

   physics for your observations without first-

   hand observation and diagnosis. I can tell

   you that incidences of wiring 

   interfering with the compass is rare.

   Suggest you get the new trim system installed

   using the drawing cited below as guidance.



   Then see if the compass is still getting

   trashed . . . it will be easier to figure

   out why it IS having problems than to

   figure out why it is NOT having problems. 



 

  	  Quote: 	
		  I  find this documentation to do my wire. 	


   I think this wiring diagram is what you're

   needing.



  http://tinyurl.com/y7mwhg4t



 

 

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Achille

Joined: 12 Jun 2017
Posts: 25
Location: Europe

Posted: Fri Jun 23, 2017 4:26 am Post subject: Re: Tosten grip wiring with car-relay for trim

Thank you bob, 



I haven't see the response before and I answered in other topic. 



I will try it and I will come back to tell if it run better or not. (if it run well also to tell what it was bad if it can help anyone.)



I find relay a bit slow for the motor trim operation, we haven't another solution to wire it with another system ? (transistor ? I don't know well what is it, I just read that on internet)



Thank you !



Mickaël

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum