Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Gap seal

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

Mcabbage

Joined: 08 Sep 2013
Posts: 41
Location: MA.

Posted: Tue Aug 08, 2017 2:59 pm Post subject: Gap seal

Hi to all.

A buddy is looking for ideas as to the best way/method to install gap seals on his Firestar2  

Thanks in advance for any help.

Mike

_________________
2007 Firestar 2 503 N203SD
Moster 185 Flattop PPG/Sky K2 Paraglider
Trike Buggy Soaring Trike & Northwing Stratus XP

byoungplumbing(at)gmail.c
Guest

Posted: Tue Aug 08, 2017 3:22 pm Post subject: Gap seal

Ideas to install gap seal.

I have a vls brs. Â  Â The tray for the brs is mounted to the motor mount tube... Â  I've riveted a Â 7/8 tube to the brs mounting plate...Â  As I built ribs for the gap seal they were built in a manner that I could rivet an internal brace to the 7/8 tube... Â  Â Then built a faring between the top of the windshield and bottom of the gap seal, Â riveting in place.... Â  Â The sides of the gap seal are 1/4 to 3/8 inches from the wings..

I can fold the wings without removing the gap seal. Â  Â 

Boyd Young

 	  Quote:

IMG_20170801_094549.jpg

Description:

Filesize:

1.79 MB

Viewed:

13670 Time(s)

lcottrell

Joined: 29 May 2006
Posts: 1494
Location: Jordan Valley, Or

Posted: Tue Aug 08, 2017 5:51 pm Post subject: Gap seal

It would appear that Boyd and I are the only ones awake today. I purposely waited for someone smarter than myself to give you guidance. I suppose he is out flying.



I have seen three ways to do a gap seal. One is using the fabric that Kolb gives you. It works, but I never liked it.Â 

The Mark III's all seem to build a solid gap seal such as described by Boyd. It works well, but I was either never smart enough to build one or too lazy. I couldn't say for sure which. It works well

The method that I used for my Firestar II is a bent tin front secured to a piece of lexan with a cut out for a motor or any thing else in the way such as my muffler. It is secured to the wings with velcro. When you take it off, just slide a towel or a piece of lexan or cardboard between the two pieces of velcro and lift it off..Â 

Larry

On Tue, Aug 8, 2017 at 4:59 PM, Mcabbage <Mc(at)americanbuilding.com (Mc(at)americanbuilding.com)> wrote:

 	  Quote: 	
		  --> Kolb-List message posted by: "Mcabbage" <Mc(at)americanbuilding.com (Mc(at)americanbuilding.com)>

 

 Hi to all.

 A buddy is looking for ideas as to the best way/method to install gap seals on his Firestar2

 Thanks in advance for any help.

 Mike

 

 --------

 2007Â  Firestar 2 503Â  N203SD

 Moster 185 Flattop PPG/Sky K2 Paraglider

 Trike Buggy Soaring Trike &amp; Northwing Stratus XP

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=471635#471635

 

 

 

 

 

 

 ====================================

 -List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Kolb-List

 ====================================

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ====================================

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ====================================

 b Site -

 Â  Â  Â  Â  Â  -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ====================================

 

 

 

 	




-- 

The older I get, the less tolerant I am of those who are intolerant of others.





If you forward this email, or any part of it, please remove my email address before sending.

gap_1.JPG

Description:

Filesize:

1.37 MB

Viewed:

13664 Time(s)

gap_2.JPG

Description:

Filesize:

1.35 MB

Viewed:

13664 Time(s)

gap_3.JPG

Description:

Filesize:

1.26 MB

Viewed:

13664 Time(s)

_________________
do not archive

gdhelton(at)gmail.com
Guest

Posted: Tue Aug 08, 2017 5:54 pm Post subject: Gap seal

Call Helen at Kolb Aircraft. She will make you a fabric gap that is held in place with super 2" wide Velcro. They work great. They hold up well. I had the old zipper type originally and these work and hold up just as well or better. 

George H. 

Firestar, FS# 100

14GDH

Mesick, Michigan 

Have a great day!



 	  Quote: 	
		   On Aug 8, 2017, at 6:59 PM, Mcabbage <Mc(at)americanbuilding.com> wrote:

 

 

 

 Hi to all.

 A buddy is looking for ideas as to the best way/method to install gap seals on his Firestar2  

 Thanks in advance for any help.

 Mike

 

 --------

 2007  Firestar 2 503  N203SD

 Moster 185 Flattop PPG/Sky K2 Paraglider

 Trike Buggy Soaring Trike &amp; Northwing Stratus XP

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=471635#471635

 

 

 

 

 

 

====================================
	


====================================

====================================

====================================

====================================

 	  Quote:

image1.jpeg

Description:

Filesize:

100.43 KB

Viewed:

13664 Time(s)

Mcabbage

Joined: 08 Sep 2013
Posts: 41
Location: MA.

Posted: Thu Aug 10, 2017 10:35 am Post subject: Re: Gap seal

Thanks guys 

I'm sorry I wasn't more clear in my post.

I was looking for info on sealing the gap between the 

wing and airilons.   My friend said some folks are using 

some kind of new strechy material that is easier to remove

if needed.  

Thanks Mike

_________________
2007 Firestar 2 503 N203SD
Moster 185 Flattop PPG/Sky K2 Paraglider
Trike Buggy Soaring Trike & Northwing Stratus XP

Richard Pike

Joined: 09 Jan 2006
Posts: 1671
Location: Blountville, Tennessee

Posted: Thu Aug 10, 2017 3:23 pm Post subject: Re: Gap seal

Oh. <Grin> You want packaging tape. Check the archives, tons of entries.

_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.

gdhelton(at)gmail.com
Guest

Posted: Thu Aug 10, 2017 3:35 pm Post subject: Gap seal

I guess some use book binding tape? I did mine per Kolbs plans using 2" Stitts polyfiber tape and polybrush. It has lasted since 1986. Still looks great! Do you want fast and easy or quality?



Have a great day! George H.



 	  Quote: 	
		   On Aug 10, 2017, at 2:35 PM, Mcabbage <Mc(at)americanbuilding.com> wrote:

 

 

 

 Thanks guys 

 I'm sorry I wasn't more clear in my post.

 I was looking for info on sealing the gap between the 

 wing and airilons.   My friend said some folks are using 

 some kind of new strechy material that is easier to remove

 if needed.  

 Thanks Mike

 

 --------

 2007  Firestar 2 503  N203SD

 Moster 185 Flattop PPG/Sky K2 Paraglider

 Trike Buggy Soaring Trike &amp; Northwing Stratus XP

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=471716#471716

skydiveal(at)aol.com
Guest

Posted: Thu Aug 10, 2017 3:51 pm Post subject: Gap seal

Per kolb if going the fast way

Sent from my Samsung Galaxy smartphone.



-------- Original message --------

From: Richard Pike <thegreybaron(at)charter.net> 

Date: 8/10/17  7:23 PM  (GMT-05:00) 

To: kolb-list(at)matronics.com 

Subject: Kolb-List: Re: Gap seal 



--> Kolb-List message posted by: "Richard Pike" <thegreybaron(at)charter.net>



Oh.  You want packaging tape. Check the archives, tons of entries.



--------

Richard Pike

Kolb MKIII N420P (420ldPoops)

Kingsport, TN 3TN0



Forgiving is tough. Being forgiven is wonderful.





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=471724#471724

_-============================================================

_-=          - The Kolb-List Email Forum -

_-= Use the Matronics List Features Navigator to browse

_-= the many List utilities such as List Un/Subscription,

_-= Archive Search & Download, 7-Day Browse, Chat, FAQ,

_-= Photoshare, and much much more:

_-=

_-=   --> http://www.matronics.com/Navigator?Kolb-List

_-=

_-============================================================

_-=               - MATRONICS WEB FORUMS -

_-= Same great content also available via the Web Forums!

_-=

_-=   --> http://forums.matronics.com

_-=

_-============================================================

_-=              - NEW MATRONICS LIST WIKI -

_-= Add some info to the Matronics Email List Wiki!

_-=   --> http://wiki.matronics.com

_-============================================================

_-=             - List Contribution Web Site -

_-=  Thank you for your generous support!

_-=                              -Matt Dralle, List Admin.

_-=   --> http://www.matronics.com/contribution

_-============================================================

Screenshot_2016-12-06-17-54-43.png

Description:

Filesize:

1.71 MB

Viewed:

13550 Time(s)

skydiveal(at)aol.com
Guest

Posted: Thu Aug 10, 2017 3:52 pm Post subject: Gap seal

Works great

Sent from my Samsung Galaxy smartphone.



-------- Original message --------

From: Richard Pike <thegreybaron(at)charter.net> 

Date: 8/10/17  7:23 PM  (GMT-05:00) 

To: kolb-list(at)matronics.com 

Subject: Kolb-List: Re: Gap seal 



--> Kolb-List message posted by: "Richard Pike" <thegreybaron(at)charter.net>



Oh.  You want packaging tape. Check the archives, tons of entries.



--------

Richard Pike

Kolb MKIII N420P (420ldPoops)

Kingsport, TN 3TN0



Forgiving is tough. Being forgiven is wonderful.





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=471724#471724

_-============================================================

_-=          - The Kolb-List Email Forum -

_-= Use the Matronics List Features Navigator to browse

_-= the many List utilities such as List Un/Subscription,

_-= Archive Search & Download, 7-Day Browse, Chat, FAQ,

_-= Photoshare, and much much more:

_-=

_-=   --> http://www.matronics.com/Navigator?Kolb-List

_-=

_-============================================================

_-=               - MATRONICS WEB FORUMS -

_-= Same great content also available via the Web Forums!

_-=

_-=   --> http://forums.matronics.com

_-=

_-============================================================

_-=              - NEW MATRONICS LIST WIKI -

_-= Add some info to the Matronics Email List Wiki!

_-=   --> http://wiki.matronics.com

_-============================================================

_-=             - List Contribution Web Site -

_-=  Thank you for your generous support!

_-=                              -Matt Dralle, List Admin.

_-=   --> http://www.matronics.com/contribution

_-============================================================

Screenshot_2016-12-06-17-54-43.png

Description:

Filesize:

1.71 MB

Viewed:

13550 Time(s)

wakataka

Joined: 11 Aug 2012
Posts: 48

Posted: Fri Aug 11, 2017 5:22 pm Post subject: Re: Gap seal

Brian Carpenter has come up with a great way to make gap seals from foam pool noodles. He pulls the noodles through a heated die.



https://electricmotorglider.com/2017/07/15/57-80-10-large-gap-seal/



The resulting foam shape fits snugly between the aileron tube and the trailing edge of the wing and completely fills in the profile of the wing shape between the trailing edge and the aileron.



I've also used a urethane tape designed for sealing gaps in doors and windows. I think I got it at Ace Hardware. It's slightly stretchy and very sticky. I've had it in place for over 5 years and none of it has fallen off. The gap on the airplane I have it on may be smaller than on the Kolb.

_________________
There is something fascinating about science. One gets such wholesale returns of conjecture out of such a trifling investment of fact.

Mark Twain

Mcabbage

Joined: 08 Sep 2013
Posts: 41
Location: MA.

Posted: Sat Aug 12, 2017 4:18 am Post subject: Re: Gap seal

Pretty interesting.



Thank you guys.

_________________
2007 Firestar 2 503 N203SD
Moster 185 Flattop PPG/Sky K2 Paraglider
Trike Buggy Soaring Trike & Northwing Stratus XP

mojavjoe

Joined: 23 Dec 2013
Posts: 64

Posted: Sat Aug 12, 2017 4:28 am Post subject: Gap seal

I tried making the noodle gap seals but because of the way Kolb ailerons are hinged they pop out.



Joe



From: "wakataka" <wakataka(at)charter.net>

To: "kolb-list" <kolb-list(at)matronics.com>

Sent: Friday, August 11, 2017 9:22:48 PM

Subject: Re: Gap seal

--> Kolb-List message posted by: "wakataka" <wakataka(at)charter.net>

Brian Carpenter has come up with a great way to make gap seals from foam pool noodles. He pulls the noodles through a heated die.

https://electricmotorglider.com/2017/07/15/57-80-10-large-gap-seal/

The resulting foam shape fits snugly between the aileron tube and the trailing edge of the wing and completely fills in the profile of the wing shape between the trailing edge and the aileron.

--------

There is something fascinating about science. One gets such wholesale returns of conjecture out of such a trifling investment of fact.

Mark Twain

Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=471770#471770

ceengland7(at)gmail.com
Guest

Posted: Sat Aug 12, 2017 5:11 am Post subject: Gap seal

They *look* like they would cause significantly increased control system drag, due to friction between/among the fixed & moving surfaces and the noodle. I guess that in some a/c designs, it might not be noticeable.



On Sat, Aug 12, 2017 at 7:28 AM,  <mojavjoe(at)comcast.net (mojavjoe(at)comcast.net)> wrote:

 	  Quote: 	
		  I tried making the noodle gap seals but because of the way Kolb ailerons are hinged they pop out.



Joe



From: "wakataka" <wakataka(at)charter.net (wakataka(at)charter.net)>

To: "kolb-list" <kolb-list(at)matronics.com (kolb-list(at)matronics.com)>

Sent: Friday, August 11, 2017 9:22:48 PM

Subject: Kolb-List: Re: Gap seal

--> Kolb-List message posted by: "wakataka" <wakataka(at)charter.net (wakataka(at)charter.net)>

Brian Carpenter has come up with a great way to make gap seals from foam pool noodles. He pulls the noodles through a heated die.

https://electricmotorglider.com/2017/07/15/57-80-10-large-gap-seal/

The resulting foam shape fits snugly between the aileron tube and the trailing edge of the wing and completely fills in the profile of the wing shape between the trailing edge and the aileron.

--------

There is something fascinating about science. One gets such wholesale returns of conjecture out of such a trifling investment of fact.

Mark Twain

Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=471770#471770

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum