Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Strobe wiring?

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

davidjoyce(at)doctors.org
Guest

Posted: Sat Aug 19, 2017 12:36 pm Post subject: Strobe wiring?

I am down to almost the last wire from my old fuselage to connect to the new bit and new panel and have run up against a problem with my Airworld Skyflash single head strobe. The wire coming from the driver unit is a fairly heavy gauge 3 core unshielded one with red, black and green wires. My problem is what to do with the green wire. The installation guide I have kept since 2000 doesn't mention it. Airworld went out of business a while ago. Internet search for a wiring diagram has drawn a blank, only turning up the same installation guide I already have, which is good on actual hardware fixing but no hint about the green wire. The  driver is up in the tail cone where I really do not want to go! Can anyone help please? 

Regards, David Joyce, GXSDJ

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

davidjoyce(at)doctors.org
Guest

Posted: Sat Aug 19, 2017 1:27 pm Post subject: Strobe wiring?

PS. It may be of course that I just used three core wire because I had it but there were only two cores connected! 

   

 

On 2017-08-19 21:34, davidjoyce(at)doctors.org.uk wrote:  	  Quote: 	
		   

I am down to almost the last wire from my old fuselage to connect to the new bit and new panel and have run up against a problem with my Airworld Skyflash single head strobe. The wire coming from the driver unit is a fairly heavy gauge 3 core unshielded one with red, black and green wires. My problem is what to do with the green wire. The installation guide I have kept since 2000 doesn't mention it. Airworld went out of business a while ago. Internet search for a wiring diagram has drawn a blank, only turning up the same installation guide I already have, which is good on actual hardware fixing but no hint about the green wire. The  driver is up in the tail cone where I really do not want to go! Can anyone help please? 

Regards, David Joyce, GXSDJ

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Nigel Graham

Joined: 23 Mar 2017
Posts: 36
Location: Winchester - UK

Posted: Sat Aug 19, 2017 1:43 pm Post subject: Re: Strobe wiring?

I have attached a copy of the Skyworld  Installation instructions. These include the plug wiring. This may be what you are after.

Nigel

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Skyflash Wiring Instructions.doc

Description:

Download

Filename:

Skyflash Wiring Instructions.doc

Filesize:

72.5 KB

Downloaded:

678 Time(s)

Duncan McFadyean

Joined: 18 Jan 2011
Posts: 219

Posted: Sun Aug 20, 2017 1:06 am Post subject: Strobe wiring?

David,

Airworld strobe stuff was supplied by Kuntzleman:

http://www.kestrobes.com/

Duncan.

 

  	  Quote: 	
		   ----Original Message----

 From: davidjoyce(at)doctors.org.uk

 Date: 19/08/2017 21:34

 To: "europa  list"<europa-list(at)matronics.com>

 Subj: Strobe wiring?

 

   

I am down to almost the last wire from my old fuselage to connect to the new bit and new panel and have run up against a problem with my Airworld Skyflash single head strobe. The wire coming from the driver unit is a fairly heavy gauge 3 core unshielded one with red, black and green wires. My problem is what to do with the green wire. The installation guide I have kept since 2000 doesn't mention it. Airworld went out of business a while ago. Internet search for a wiring diagram has drawn a blank, only turning up the same installation guide I already have, which is good on actual hardware fixing but no hint about the green wire. The  driver is up in the tail cone where I really do not want to go! Can anyone help please? 

Regards, David Joyce, GXSDJ

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Burrilla

Joined: 25 Apr 2015
Posts: 185

Posted: Sun Aug 20, 2017 2:58 am Post subject: Strobe wiring?

Davind, sent you a pad document that i have if it helps - has a green wire in the diagrams.

If any use then perhaps the Europa site Webmaster might consider adding to the knowledge pool on the Europa Site for future as they Airworld now out of business.



Alan



GCDPY 	  Quote: 	
		  On 19 Aug 2017, at 21:34, davidjoyce(at)doctors.org.uk (davidjoyce(at)doctors.org.uk) wrote:

 

I am down to almost the last wire from my old fuselage to connect to the new bit and new panel and have run up against a problem with my Airworld Skyflash single head strobe. The wire coming from the driver unit is a fairly heavy gauge 3 core unshielded one with red, black and green wires. My problem is what to do with the green wire. The installation guide I have kept since 2000 doesn't mention it. Airworld went out of business a while ago. Internet search for a wiring diagram has drawn a blank, only turning up the same installation guide I already have, which is good on actual hardware fixing but no hint about the green wire. The  driver is up in the tail cone where I really do not want to go! Can anyone help please?

Regards, David Joyce, GXSDJ

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

dpark748(at)me.com
Guest

Posted: Sun Aug 20, 2017 5:48 am Post subject: Strobe wiring?

While on the subject i am getting pulses of interference on my radio with my skyflash? Has anyone had similar problem and know the fix. 

Dave Park G-LDVO





On 20 Aug 2017, at 11:57, Alan Burrill <alanb(at)dpy01.co.uk (alanb(at)dpy01.co.uk)> wrote:

 	  Quote: 	
		  Davind, sent you a pad document that i have if it helps - has a green wire in the diagrams.

If any use then perhaps the Europa site Webmaster might consider adding to the knowledge pool on the Europa Site for future as they Airworld now out of business.



Alan



GCDPY 	  Quote: 	
		  On 19 Aug 2017, at 21:34, davidjoyce(at)doctors.org.uk (davidjoyce(at)doctors.org.uk) wrote:

 

I am down to almost the last wire from my old fuselage to connect to the new bit and new panel and have run up against a problem with my Airworld Skyflash single head strobe. The wire coming from the driver unit is a fairly heavy gauge 3 core unshielded one with red, black and green wires. My problem is what to do with the green wire. The installation guide I have kept since 2000 doesn't mention it. Airworld went out of business a while ago. Internet search for a wiring diagram has drawn a blank, only turning up the same installation guide I already have, which is good on actual hardware fixing but no hint about the green wire. The  driver is up in the tail cone where I really do not want to go! Can anyone help please?

Regards, David Joyce, GXSDJ

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

pete(at)lawless.info
Guest

Posted: Sun Aug 20, 2017 7:37 am Post subject: Strobe wiring?

Hi Dave

          

Yes I had a similar problem a couple of years back.  Ended up       replacing the then 15 year old unit. Opened the box thinking it       may be a capacitor but could not find anything obvious.

          

Pete     

G-RMAC 

          

     On 20/08/17 14:47, david park wrote:

     

      	  Quote: 	
		                While on the subject i am getting pulses of interference on         my radio with my skyflash? Has anyone had similar problem and         know the fix. 

         Dave Park G-LDVO

         

         

       

       

         On 20 Aug 2017, at 11:57, Alan Burrill <alanb(at)dpy01.co.uk (alanb(at)dpy01.co.uk)>         wrote:

         

       

        	  Quote: 	
		                                 Davind, sent you a pad document that i have if it helps - has           a green wire in the diagrams.                      

           If any use then perhaps the Europa site             Webmaster might consider adding to the knowledge pool on the             Europa Site for future as they Airworld now out of business.

                      

           Alan

                      

           GCDPY                             	  Quote: 	
		                   On 19 Aug 2017, at 21:34, davidjoyce(at)doctors.org.uk (davidjoyce(at)doctors.org.uk)                   wrote:

                                                                          

I am down to almost the last wire from                       my old fuselage to connect to the new bit and new                       panel and have run up against a problem with my                       Airworld Skyflash single head strobe. The wire                       coming from the driver unit is a fairly heavy                       gauge 3 core unshielded one with red, black and                       green wires. My problem is what to do with the                       green wire. The installation guide I have kept                       since 2000 doesn't mention it. Airworld went out                       of business a while ago. Internet search for a                       wiring diagram has drawn a blank, only turning up                       the same installation guide I already have, which                       is good on actual hardware fixing but no hint                       about the green wire. The  driver is up in the                       tail cone where I really do not want to go! Can                       anyone help please?                     

Regards, David Joyce, GXSDJ

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum