Jerry-TS-MkII
Joined: 23 Aug 2017
Posts: 79
Location: Indiana
|
 Posted: Tue Aug 29, 2017 10:06 am Post subject: Parts needed: Old style Ivo prop adjustment cams |
 |
|
Hello everyone,
Having a OLD STYLE 3 blade Ivo that I hope to use initially on my Twinstar Mk II, it came without the adjustment cams or adjustment shims. This prop doesn't have the large "easy to adjust external screw and lock nut") So it's at 6 degrees as I read the "no-cam" default. Ideally, I need to find/make/buy 3 cams, and a set of shims.. but I can make either if needed. The shims just round plates, of unknown thickness (at this point) that stack in front, or behind the prop blades, to move the 3 cams.
Not sure if Ivo will send me any drawings since they are discontinued parts. But apparently they just have a screw (and some Lock-tite) holding them onto the end of the torque rod in the prop blade. If anyone has converted from 3 blade to 2, and has a spare blade w/cam, and would be willing to sell 3, or 1, or send me one cam and shim to duplicate, I'd gladly return with a coupon to your pub of choice, or health-food store, (I find them to be one and the SAME place myself.. but others might not). Someone's junk drawer probably has one (or more). But if like my shop, 3 weeks to find them would be the problem.. LOL. Any productive thoughts, sources, manifest instructions, etc, all welcome! Thanks, Jerry
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
