Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

ADS-B Antennae

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

1james.baldwin(at)gmail.c
Guest

Posted: Tue Oct 31, 2017 5:58 pm Post subject: ADS-B Antennae

I am hooking up my Grand Rapids Technology ADS-B hardware and two of 

the connections are coax.  I asked and they said either RG58 or RG400 

works.

1.  Should I use one or the other for some reason?

2.  I can't thread a completed coax where it goes with connectors so I 

need to fasten or crimp them on afterwards.  Anyone using a tool 

available at Lowe's or HD or Fry's or ...?

3.  I went to Lowe's and didn't see any RG58 wire or connectors.  I saw 

they had RG59 whatever that is.  I did see RG58 A/U at Aircraft Spruce.



Hints appreciated.  Thank you.   JBB

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Kellym

Joined: 10 Jan 2006
Posts: 1705
Location: Sun Lakes AZ

Posted: Tue Oct 31, 2017 7:56 pm Post subject: ADS-B Antennae

Crimp tool: 

http://www.steinair.com/product/ratcheting-crimper-frame-only/  and 

http://www.steinair.com/product/bnc-crimp-die-only/

Do not try to use TV or automotive crimpers.

If your run is about 6 ft or less, you can use RG58 of the stranded wire 

center conductor variety. I suggest RG-400 for your transponder/ADS-B 

Out transmitter. RG-58 will do the job for the ADS-B In receiver, as 

well as for your com radio(s).

RG-58 and RG-400 are 50 ohm impedance, which you want. RG-59 is 75 ohm 

impedance and usually solid core center conductor.



On 10/31/2017 6:56 PM, James Baldwin wrote:

 	  Quote: 	
		   

 <1james.baldwin(at)gmail.com>

 

     I am hooking up my Grand Rapids Technology ADS-B hardware and two of 

 the connections are coax.  I asked and they said either RG58 or RG400 

 works.

 1.  Should I use one or the other for some reason?

 2.  I can't thread a completed coax where it goes with connectors so I 

 need to fasten or crimp them on afterwards.  Anyone using a tool 

 available at Lowe's or HD or Fry's or ...?

 3.  I went to Lowe's and didn't see any RG58 wire or connectors.  I saw 

 they had RG59 whatever that is.  I did see RG58 A/U at Aircraft Spruce.

 

 Hints appreciated.  Thank you.   JBB

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD

wrmaxwell(at)bigpond.com
Guest

Posted: Tue Oct 31, 2017 9:01 pm Post subject: ADS-B Antennae

RG59 is 75 Ohm coax,           used in video/tv applications. RG400 is higher spec 50 ohm           coax. RG58 is the more common. For short runs, RG58 is           normally adequate.

          

     On 1/11/2017 12:56 PM, James Baldwin       wrote:

     

      	  Quote: 	
		  -->       AeroElectric-List message posted by: James Baldwin       <1james.baldwin(at)gmail.com> (1james.baldwin(at)gmail.com)       

       

          I am hooking up my Grand Rapids Technology ADS-B hardware and       two of the connections are coax.  I asked and they said either       RG58 or RG400 works.       

       1.  Should I use one or the other for some reason?       

       2.  I can't thread a completed coax where it goes with connectors       so I need to fasten or crimp them on afterwards.  Anyone using a       tool available at Lowe's or HD or Fry's or ...?       

       3.  I went to Lowe's and didn't see any RG58 wire or connectors.        I saw they had RG59 whatever that is.  I did see RG58 A/U at       Aircraft Spruce.       

       

       Hints appreciated.  Thank you.   JBB

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

rene(at)felker.com
Guest

Posted: Wed Nov 01, 2017 5:00 am Post subject: ADS-B Antennae

If you have your cable lengths….just call Stein and have him make the cables with RG400.  If time is money, it is the best way to go.

 

If they have to be made in place…..

 

I used RG400…..

 

From: owner-aeroelectric-list-server(at)matronics.com [mailto:owner-aeroelectric-list-server(at)matronics.com] On Behalf Of Bill Maxwell

Sent: Tuesday, October 31, 2017 11:00 PM

To: aeroelectric-list(at)matronics.com

Subject: Re: ADS-B Antennae

 

RG59 is 75 Ohm coax, used in video/tv applications. RG400 is higher spec 50 ohm coax. RG58 is the more common. For short runs, RG58 is normally adequate.

 

On 1/11/2017 12:56 PM, James Baldwin wrote:

 	  Quote: 	
		  

--> AeroElectric-List message posted by: James Baldwin <1james.baldwin(at)gmail.com> (1james.baldwin(at)gmail.com) 



   I am hooking up my Grand Rapids Technology ADS-B hardware and two of the connections are coax.  I asked and they said either RG58 or RG400 works. 

1.  Should I use one or the other for some reason? 

2.  I can't thread a completed coax where it goes with connectors so I need to fasten or crimp them on afterwards.  Anyone using a tool available at Lowe's or HD or Fry's or ...? 

3.  I went to Lowe's and didn't see any RG58 wire or connectors.  I saw they had RG59 whatever that is.  I did see RG58 A/U at Aircraft Spruce. 



Hints appreciated.  Thank you.   JBB

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum