![Matronics Email Lists Forum Index](templates/Matronics/images/logo_phpBB.gif) |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
kirk bellard
Joined: 31 Mar 2016 Posts: 13 Location: breaux bridge la
|
Posted: Fri Jan 26, 2018 6:35 am Post subject: slipping |
|
|
bought 2006 mark 3 and often practiced slips, the steel tubing for vertical stabilizer cracked where it attaches to tail boom, is this common are slips to much torque for these planes,
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
Ralph B
![](images/avatars/67364827497a6bd2569cc.jpg)
Joined: 14 Apr 2007 Posts: 367 Location: Mound Minnesota
|
Posted: Fri Jan 26, 2018 7:22 am Post subject: Re: slipping |
|
|
kirk bellard wrote: | bought 2006 mark 3 and often practiced slips, the steel tubing for vertical stabilizer cracked where it attaches to tail boom, is this common are slips to much torque for these planes, |
I performed slips all the time with both my Firestar and Kolbra. I did see a crack where the cage bolts to the tail boom on the Firestar, but I'm not sure it was due to slipping it. Nothing yet on the Kolbra.
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________ Ralph B
Kolb Kolbra 912uls
N20386
550 hours |
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
Richard Pike
![](images/avatars/57903806352d56370bc2be.jpg)
Joined: 09 Jan 2006 Posts: 1670 Location: Blountville, Tennessee
|
Posted: Fri Jan 26, 2018 7:26 am Post subject: Re: slipping |
|
|
More likely it cracked because of torque on the tailwheel during turns on rough ground. There is a simple fix: a brace made of 1/2" or 3/4" x 1/8" aluminum flat stock from Lowes to brace the lower end of the tube.
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
Description: |
|
Filesize: |
148.4 KB |
Viewed: |
7972 Time(s) |
![P1060500 (Medium).JPG](files/p1060500_medium_489.jpg)
|
Description: |
|
Filesize: |
143.66 KB |
Viewed: |
7972 Time(s) |
![P1060499 (Medium).JPG](files/p1060499_medium_205.jpg)
|
_________________ Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0
Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing. |
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
lcottrell
![](images/avatars/159241085449b5f0d1e0f0.jpg)
Joined: 29 May 2006 Posts: 1494 Location: Jordan Valley, Or
|
Posted: Fri Jan 26, 2018 7:30 am Post subject: slipping |
|
|
If I understand correctly, your question was not about where the cage attached, but the tail post that secures the tail wheel. If this is correct then the cause for the crack is cured by a breakaway tail wheel.Larry
On Fri, Jan 26, 2018 at 8:22 AM, Ralph B <rstar447(at)gmail.com (rstar447(at)gmail.com)> wrote:
Quote: | --> Kolb-List message posted by: "Ralph B" <rstar447(at)gmail.com (rstar447(at)gmail.com)>
kirk bellard wrote:
> bought 2006 mark 3 and often practiced slips, the steel tubing for vertical stabilizer cracked where it attaches to tail boom, is this common are slips to much torque for these planes,
I performed slips all the time with both my Firestar and Kolbra. I did see a crack where the cage bolts to the tail boom on the Firestar, but I'm not sure it was due to slipping it. Nothing yet on the Kolbra.
--------
Ralph B
Kolb Kolbra 912uls
N20386
550 hours
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=477596#477596
====================================
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Kolb-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
====================================
WIKI -
errer" target="_blank">http://wiki.matronics.com
====================================
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================
|
--
The older I get, the less tolerant I am of those who are intolerant of others.
If you forward this email, or any part of it, please remove my email address before sending.
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________ do not archive |
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
John Hauck
![](images/avatars/12284463514b28f652ba382.jpg)
Joined: 09 Jan 2006 Posts: 4639 Location: Titus, Alabama (hauck's holler)
|
Posted: Fri Jan 26, 2018 7:38 am Post subject: slipping |
|
|
Doubt slips caused your problem. More like lateral stress experienced
during ground handling.
There is no lateral bracing for the tail post except where it is welded to
the tail boom ring.
My MKIII experienced this problem several times before a friend suggested
some external lateral bracing. Went that route in 2004. No more tail post
problems.
Let me see if I can find a photo of our modification. The attached photo
will give you an idea of what we did. Welded a strut on each side of the
lower tail post and tail boom ring.
Some Kolb owners have used bolts to attach aluminum or 4130 chromoly steel
strap instead of welding.
For some there is a misconception that the tail wires are "tail bracing
wires". I don't think they brace anything. Their main function is to space
the vertical and horizontal stabilizers.
These new struts do a good job of removing lateral slop and strengthening
the tail section.
john h
mkIII
Titus, Alabama
--
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
Description: |
|
Filesize: |
303 KB |
Viewed: |
7967 Time(s) |
![DSCF2396_resize.JPG](files/DSCF2396_resize_201.jpg)
|
_________________ John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama |
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
kirk bellard
Joined: 31 Mar 2016 Posts: 13 Location: breaux bridge la
|
Posted: Fri Jan 26, 2018 2:48 pm Post subject: Re: slipping |
|
|
thanks for all the advise, the bracing looks like a good idea, but i do have the break away tail wheel
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
victorbravo(at)sbcglobal. Guest
|
Posted: Fri Jan 26, 2018 3:15 pm Post subject: slipping |
|
|
IMHO the tail wires on a Kolb are referred to correctly as bracing wires. They brace the horizontal and vertical stabilizers against moving from air loads, control surface movement loads, etc. The use of the term "bracing wires", or "wire braced structure" goes way way back through the history of aircraft and then back through ships, then back to bridge trusses. They perform the same p[hysical function as "guy wires" on a tower or flagpole mast, but for some reason "guy wires" never seems to have been used in aviation.
Bill Berle
www.ezflaphandle.com - safety & performance upgrade for light aircraft
www.grantstar.net - winning proposals for non-profit and for-profit entities
--------------------------------------------
On Fri, 1/26/18, John Hauck <jhauck(at)elmore.rr.com> wrote:
Subject: RE: slipping
To: kolb-list(at)matronics.com
Date: Friday, January 26, 2018, 7:37 AM
Doubt slips caused your problem. More
like lateral stress experienced
during ground handling.
There is no lateral bracing for the
tail post except where it is welded to
the tail boom ring.
My MKIII experienced this problem
several times before a friend suggested
some external lateral bracing.
Went that route in 2004. No more tail post
problems.
Let me see if I can find a photo of our
modification. The attached photo
will give you an idea of what we
did. Welded a strut on each side of the
lower tail post and tail boom ring.
Some Kolb owners have used bolts to
attach aluminum or 4130 chromoly steel
strap instead of welding.
For some there is a misconception that
the tail wires are "tail bracing
wires". I don't think they brace
anything. Their main function is to space
the vertical and horizontal
stabilizers.
These new struts do a good job of
removing lateral slop and strengthening
the tail section.
john h
mkIII
Titus, Alabama
--
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
ceengland7(at)gmail.com Guest
|
Posted: Fri Jan 26, 2018 4:58 pm Post subject: slipping |
|
|
I'd have to agree with Bill on this one. I don't think you'd want to fly
a Kolb with anything weaker than the recommended wire rope in those
places. The tubing and cables combine to form a cable braced truss to
form the tail, just as the old 'king post' style ultralites used to
support the wing. You just get a 'twofer' in the tail, bracing the
vertical to side loads with the same wires that brace the horizontal
against vertical loads.
Charlie
On 1/26/2018 5:14 PM, Bill Berle wrote:
Quote: |
IMHO the tail wires on a Kolb are referred to correctly as bracing wires. They brace the horizontal and vertical stabilizers against moving from air loads, control surface movement loads, etc. The use of the term "bracing wires", or "wire braced structure" goes way way back through the history of aircraft and then back through ships, then back to bridge trusses. They perform the same p[hysical function as "guy wires" on a tower or flagpole mast, but for some reason "guy wires" never seems to have been used in aviation.
Bill Berle
www.ezflaphandle.com - safety & performance upgrade for light aircraft
www.grantstar.net - winning proposals for non-profit and for-profit entities
--------------------------------------------
On Fri, 1/26/18, John Hauck <jhauck(at)elmore.rr.com> wrote:
Subject: RE: slipping
To: kolb-list(at)matronics.com
Date: Friday, January 26, 2018, 7:37 AM
Doubt slips caused your problem. More
like lateral stress experienced
during ground handling.
There is no lateral bracing for the
tail post except where it is welded to
the tail boom ring.
My MKIII experienced this problem
several times before a friend suggested
some external lateral bracing.
Went that route in 2004. No more tail post
problems.
Let me see if I can find a photo of our
modification. The attached photo
will give you an idea of what we
did. Welded a strut on each side of the
lower tail post and tail boom ring.
Some Kolb owners have used bolts to
attach aluminum or 4130 chromoly steel
strap instead of welding.
For some there is a misconception that
the tail wires are "tail bracing
wires". I don't think they brace
anything. Their main function is to space
the vertical and horizontal
stabilizers.
These new struts do a good job of
removing lateral slop and strengthening
the tail section.
john h
mkIII
Titus, Alabama
|
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
John Hauck
![](images/avatars/12284463514b28f652ba382.jpg)
Joined: 09 Jan 2006 Posts: 4639 Location: Titus, Alabama (hauck's holler)
|
Posted: Fri Jan 26, 2018 6:28 pm Post subject: slipping |
|
|
My point was the wire bracing does nothing to brace the tail post from lateral loads. That's what we were talking about, a broken tail post. However, many Kolb owners feel the tail wires are actually bracing the tail post.
A friend came up with the idea to brace the tail post after I experienced 3 or 4 tail post failures. The bracing worked.
Tail wires on a Kolb keep the horizontal and vertical stabilizers equally spaced. That is their job. They don't brace the tail post.
Spacing, bracing, you get the idea.
john h
mkIII
Titus, Alabama
--
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________ John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama |
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|