 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
alan.twigg775(at)gmail.co
Guest
|
 Posted: Fri Jan 26, 2018 11:31 pm Post subject: Motor Glider Airbrake Pushrods Tube. |
 |
|
I am struggling to find the last bit of Airbrake installation in the manual.
The manual tells you to cut the tubes to 95” and instal one end fitting, stating” the final length will be stabilised later”.
I cannot find the later bit; how do I establish Tube length to install the final end fitting?
I am pleased to say that these are around the last bits in my parts box, having all the painting done, engine installed and interior trim completed.
All you USA builders must have faced this and I must be missing something obvious.
Regards to all
Alan Twigg
MG kit 463, hoping to fly in the 25th anniversary year.
Sent from my iPad
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
iancook_1(at)hotmail.com
Guest
|
| Posted: Sat Jan 27, 2018 2:54 am Post subject: Motor Glider Airbrake Pushrods Tube. |
|
|
Alan,
My wings are off at the moment and at Lasham in my trailer. You are most welcome to measure at your convenience, if the rod ends are accessible?
Ian
Sent from my iPhone
| Quote: | On 27 Jan 2018, at 07:39, Alan Twigg <alan.twigg775(at)gmail.com> wrote:
I am struggling to find the last bit of Airbrake installation in the manual.
The manual tells you to cut the tubes to 95” and instal one end fitting, stating” the final length will be stabilised later”.
I cannot find the later bit; how do I establish Tube length to install the final end fitting?
I am pleased to say that these are around the last bits in my parts box, having all the painting done, engine installed and interior trim completed.
All you USA builders must have faced this and I must be missing something obvious.
Regards to all
Alan Twigg
MG kit 463, hoping to fly in the 25th anniversary year.
Sent from my iPad
|
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
h&jeuropa
Joined: 07 Nov 2006
Posts: 645
|
| Posted: Sat Jan 27, 2018 7:04 am Post subject: Re: Motor Glider Airbrake Pushrods Tube. |
|
|
Alan,
There is nothing in the build manual concerning what you are trying to do.
Go to Bud Yerly's website under articles,
http://customflightcreations.com/techniques-articles-and-build-information/techniques-articles/
and will find the only published instructions.
We've come to a halt on our wings since there are no instructions on how to make the trailing edge of the wing/aileron/air brake align properly and ours definitely do not align!
Hope this helps.
Jim & Heather
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
