Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Z19 first try and smoke/wire melted I did a mistake

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
Achille



Joined: 12 Jun 2017
Posts: 25
Location: Europe

PostPosted: Sat Jun 16, 2018 2:03 pm    Post subject: Z19 first try and smoke/wire melted I did a mistake Reply with quote

Good day,

After some months wiring my plane with Z19, long months, today was the day to set the master switch in ON... Wink

And I did a mistake... THE mistake. (The Ridiculouse mistake !!!)

On the wire to connect to my battery, one have a red cap, the other for the moment not cut. (only things that I have to do to finish completly) Weekend finishing I would like to know after months if it works.... before the week.

I set a pair of jumper cable on the aircraft battery let on the ground i connected it to the wire into the plane. (When I wire the battery cable, the red cap was... the only one adaptable to my terminal...) It was the ground cable !!! Rolling Eyes

So yes, I did the ridiculouse mistake. And after so much time to wire the plane to have it perfectly i do this kind of ridiculouse mistake.

Then... I set master switch ON. and I see a light... it was not a light it was a wire on the battery relay that it was on fire, melting completly his insulation.

my contactor :

http://www.bandc.aero/continuousdutycontactor.aspx

my master relay switch :

http://www.bandc.aero/toggleswitch-doublepole.aspx

After that I investiguate quickly, and I find that I set the polarity on the wrong way. I set it in the good one.

Same result ! Wire coming red without no more insulation.

My first question is :

- my IFF/Radio/electronics ignitions and all the electronics parts are good to the bin ? (I have a Trig S mode... new electronics Ignitions) wire like the Z19 with a diode and without avionics switch like the Z19.

- Why I have in the bad polarity, but also in the good this wire that is comming hot and red ?

- I spoke about the electronics instruments, but the others wires could be damage as the wire spoke above ?

If you have some advise for the next step for me... I will appreciate Rolling Eyes


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



Capture d’écran 2018-06-17 à 00.00.34.png
 Description:
 Filesize:  647.5 KB
 Viewed:  2197 Time(s)

Capture d’écran 2018-06-17 à 00.00.34.png



Capture d’écran 2018-06-17 à 00.00.19.png
 Description:
 Filesize:  732.9 KB
 Viewed:  2197 Time(s)

Capture d’écran 2018-06-17 à 00.00.19.png


Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group