|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
user9253
Joined: 28 Mar 2008 Posts: 1926 Location: Riley TWP Michigan
|
Posted: Sat Jul 14, 2018 11:55 am Post subject: SOLID STATE RELAY |
|
|
My RV-12 has removable wings. There are limit switches on the 2 pins that lock the wings in place.
Originally the limit switches were wired to a form C relay. If the relay was energized, the start circuit was enabled.
If the relay was not energized, the start circuit was disabled and the normally closed relay contacts turned on a LED warning light.
Not satisfied with leaving well enough alone, I replaced the relay with MOSFET transistors. Below is a picture of the circuit.
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
Description: |
|
Filesize: |
131.73 KB |
Viewed: |
3441 Time(s) |
|
_________________ Joe Gores |
|
Back to top |
|
|
user9253
Joined: 28 Mar 2008 Posts: 1926 Location: Riley TWP Michigan
|
Posted: Sat Jul 14, 2018 12:25 pm Post subject: Re: SOLID STATE RELAY |
|
|
After posting the schematic, I realized that the 2K2 resistor on the right side is not needed.
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________ Joe Gores |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|