Matronics Email Lists :: View topic - Re: Play in monowheel Tailwheel arm rear mounting hole.

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Re: Play in monowheel Tailwheel arm rear mounting hole.

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

JonSmith

Joined: 21 May 2010
Posts: 110

Posted: Thu Jul 19, 2018 10:16 pm Post subject: Re: Play in monowheel Tailwheel arm rear mounting hole.

Hi Bud, thanks for your reply.    Just to be sure, he says his front mounting bolt and structure are all sound and in good order.    It’s the rear mount (where the arm passes through the fin close out) that he is concerned about as that 7/8” hole has become oversize with wear - elongated in an upwards direction such that the tail wheel arm is quite close to the base of the rudder.    



His concern is whether it is acceptable to pack that space out with redux/ flox around (especially above) the arm to eliminate the wear in the hole, or if a more elaborate repair in this area would be recommended.   There is no further damage to the close out area, just an oversize hole!

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
G-TERN
Classic Mono

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum