 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Jim Combs
Joined: 24 Jan 2010
Posts: 140
Location: Lexington, Ky
|
 Posted: Fri Nov 02, 2018 10:28 am Post subject: Cleveland Brake Caliper Model Number |
 |
|
Does anyone have the Cleveland brake caliper model number used on the -10. Vans delivered this a wheel set and does not have the brake caliper model number. I need a rebuild kit and cannot read the label on the caliper. I did not take a picture of it at install.
I believe it is a 30-59 but not sure.
Thanks, Jim C
40192 - N312F
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
RV-10 -> N312F - Flying as of 12/2008 |
|
| Back to top |
|
 |
Tim Olson
Joined: 25 Jan 2007
Posts: 2878
|
| Posted: Fri Nov 02, 2018 10:42 am Post subject: Cleveland Brake Caliper Model Number |
|
|
Hi Jim,
I think it's a 30-59E. At least that's what my maintenance notes say:
https://www.skygeek.com/cleveland-30-59e-brake-assembly.html
Here's a whole Cleveland pdf on it:
https://www.parker.com/literature/WBtech.PDF
And a page I saved once for myself:
https://www.myrv10.com/tips/maintenance/Cleveland_Wheels_and_Brakes/Cleveland_RV10_Brakes.pdf
Tim
PS: You're reminding me why I sent in my 2018 Donation to Matronics
yesterday.
Because:
A) I like you guys, and
B) This is the fastest method to get this kind of information.
On 11/2/18 1:26 PM, Jim Combs wrote:
| Quote: | Does anyone have the Cleveland brake caliper model number used on the
-10. Vans delivered this a wheel set and does not have the brake
caliper model number. I need a rebuild kit and cannot read the label on
the caliper. I did not take a picture of it at install.
I believe it is a 30-59 but not sure.
Thanks, Jim C
40192 - N312F
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Jim Combs
Joined: 24 Jan 2010
Posts: 140
Location: Lexington, Ky
|
| Posted: Fri Nov 02, 2018 11:29 am Post subject: Cleveland Brake Caliper Model Number |
|
|
Great! - Thanks
On Fri, Nov 2, 2018 at 2:46 PM Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
| Quote: | --> RV10-List message posted by: Tim Olson <Tim(at)MyRV10.com>
Hi Jim,
I think it's a 30-59E. At least that's what my maintenance notes say:
https://www.skygeek.com/cleveland-30-59e-brake-assembly.html
Here's a whole Cleveland pdf on it:
https://www.parker.com/literature/WBtech.PDF
And a page I saved once for myself:
https://www.myrv10.com/tips/maintenance/Cleveland_Wheels_and_Brakes/Cleveland_RV10_Brakes.pdf
Tim
PS: You're reminding me why I sent in my 2018 Donation to Matronics
yesterday.
Because:
A) I like you guys, and
B) This is the fastest method to get this kind of information.
On 11/2/18 1:26 PM, Jim Combs wrote:
> Does anyone have the Cleveland brake caliper model number used on the
> -10. Vans delivered this a wheel set and does not have the brake
> caliper model number. I need a rebuild kit and cannot read the label on
> the caliper. I did not take a picture of it at install.
>
> I believe it is a 30-59 but not sure.
>
> Thanks, Jim C
>
> 40192 - N312F
>
>
===========
br> fts!)
r> > e.com" rel="noreferrer" target="_blank">www.mypilotstore.com
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
-Matt Dralle, List Admin.
===========
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
RV-10 -> N312F - Flying as of 12/2008 |
|
| Back to top |
|
|
Kelly McMullen
Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ
|
| Posted: Fri Nov 02, 2018 1:58 pm Post subject: Cleveland Brake Caliper Model Number |
|
|
All you need to "overhaul" caliper is the correct O-ring, unless there are damaged parts. I suppose brake pads as well. | Quote: | | Sent from my IBM-360 main frame |
On Fri, Nov 2, 2018 at 12:32 PM Jim Combs <jiminlexky(at)gmail.com (jiminlexky(at)gmail.com)> wrote:
| Quote: | Great! - Thanks
On Fri, Nov 2, 2018 at 2:46 PM Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD |
|
| Back to top |
|
|
Jim Combs
Joined: 24 Jan 2010
Posts: 140
Location: Lexington, Ky
|
| Posted: Fri Nov 02, 2018 2:43 pm Post subject: Cleveland Brake Caliper Model Number |
|
|
Where can I get a correct o-ring made from a material that is compatible with the fluid and will work at the brake temperatures?
Jim C
On Fri, Nov 2, 2018 at 6:02 PM Kelly McMullen <apilot2(at)gmail.com (apilot2(at)gmail.com)> wrote:
| Quote: | All you need to "overhaul" caliper is the correct O-ring, unless there are damaged parts. I suppose brake pads as well. | Quote: | | Sent from my IBM-360 main frame |
On Fri, Nov 2, 2018 at 12:32 PM Jim Combs <jiminlexky(at)gmail.com (jiminlexky(at)gmail.com)> wrote:
| Quote: | Great! - Thanks
On Fri, Nov 2, 2018 at 2:46 PM Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
RV-10 -> N312F - Flying as of 12/2008 |
|
| Back to top |
|
|
Jim Combs
Joined: 24 Jan 2010
Posts: 140
Location: Lexington, Ky
|
| Posted: Fri Nov 02, 2018 3:15 pm Post subject: Cleveland Brake Caliper Model Number |
|
|
So I did find on Aircraft Spruce web page a Cleveland Brake Applications PDF that listed Vans RV series aircraft including the -10. It has a part breakdown of the 30-59E and listed the correct O-Ring. The cleveland part is 101-05200 also known as a MS28775-224 military spec part. Got them ordered.
Great list and support from fellow RV-10 people.
Thanks, Jim Combs
N312F
On Fri, Nov 2, 2018 at 6:02 PM Kelly McMullen <apilot2(at)gmail.com (apilot2(at)gmail.com)> wrote:
| Quote: | All you need to "overhaul" caliper is the correct O-ring, unless there are damaged parts. I suppose brake pads as well. | Quote: | | Sent from my IBM-360 main frame |
On Fri, Nov 2, 2018 at 12:32 PM Jim Combs <jiminlexky(at)gmail.com (jiminlexky(at)gmail.com)> wrote:
| Quote: | Great! - Thanks
On Fri, Nov 2, 2018 at 2:46 PM Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
RV-10 -> N312F - Flying as of 12/2008 |
|
| Back to top |
|
|
Tim Olson
Joined: 25 Jan 2007
Posts: 2878
|
| Posted: Fri Nov 02, 2018 5:30 pm Post subject: Cleveland Brake Caliper Model Number |
|
|
I think I got some from a friend in a split order from McMaster Carr. We switched to Viton for I think higher temp resistance. It’s been a looooong time now. I use the synthetic version of aviation brake fluid.
Tim
On Nov 2, 2018, at 5:41 PM, Jim Combs <jiminlexky(at)gmail.com (jiminlexky(at)gmail.com)> wrote:
| Quote: | Where can I get a correct o-ring made from a material that is compatible with the fluid and will work at the brake temperatures?
Jim C
On Fri, Nov 2, 2018 at 6:02 PM Kelly McMullen <apilot2(at)gmail.com (apilot2(at)gmail.com)> wrote:
| Quote: | All you need to "overhaul" caliper is the correct O-ring, unless there are damaged parts. I suppose brake pads as well. | Quote: | | Sent from my IBM-360 main frame |
On Fri, Nov 2, 2018 at 12:32 PM Jim Combs <jiminlexky(at)gmail.com (jiminlexky(at)gmail.com)> wrote:
| Quote: | Great! - Thanks
On Fri, Nov 2, 2018 at 2:46 PM Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
|
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
aerosport1
Joined: 07 Nov 2007
Posts: 231
|
| Posted: Fri Nov 02, 2018 5:44 pm Post subject: Cleveland Brake Caliper Model Number |
|
|
Jim I think I have some that you could have. I can check tomorrow. These are the Viton that Tim is talking about. Also I used the Royco 756, Higher flash point.
I did get them at McMaster
Geoff
Sent from my iPhoneGeoff Combs
Aerosport Modeling & Design
On Nov 2, 2018, at 9:28 PM, Tim Olson <Tim(at)MyRV10.com (Tim(at)MyRV10.com)> wrote:
| Quote: |
I think I got some from a friend in a split order from McMaster Carr. We switched to Viton for I think higher temp resistance. It’s been a looooong time now. I use the synthetic version of aviation brake fluid.
Tim
On Nov 2, 2018, at 5:41 PM, Jim Combs <jiminlexky(at)gmail.com (jiminlexky(at)gmail.com)> wrote:
| Quote: | Where can I get a correct o-ring made from a material that is compatible with the fluid and will work at the brake temperatures?
Jim C
On Fri, Nov 2, 2018 at 6:02 PM Kelly McMullen <apilot2(at)gmail.com (apilot2(at)gmail.com)> wrote:
| Quote: | All you need to "overhaul" caliper is the correct O-ring, unless there are damaged parts. I suppose brake pads as well. | Quote: | | Sent from my IBM-360 main frame |
On Fri, Nov 2, 2018 at 12:32 PM Jim Combs <jiminlexky(at)gmail.com (jiminlexky(at)gmail.com)> wrote:
| Quote: | Great! - Thanks
On Fri, Nov 2, 2018 at 2:46 PM Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
|
|
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Geoff Combs
RV-10 QB N829GW
Flying 500 hrs
40033 |
|
| Back to top |
|
|
Jim Combs
Joined: 24 Jan 2010
Posts: 140
Location: Lexington, Ky
|
| Posted: Fri Nov 02, 2018 5:45 pm Post subject: Cleveland Brake Caliper Model Number |
|
|
I have several people that I know with -10s and i ordered extras as well. I have spares now too.
Thanks, Jim C
On Fri, Nov 2, 2018 at 9:33 PM Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
| Quote: |
I think I got some from a friend in a split order from McMaster Carr. We switched to Viton for I think higher temp resistance. It’s been a looooong time now. I use the synthetic version of aviation brake fluid.
Tim
On Nov 2, 2018, at 5:41 PM, Jim Combs <jiminlexky(at)gmail.com (jiminlexky(at)gmail.com)> wrote:
| Quote: | Where can I get a correct o-ring made from a material that is compatible with the fluid and will work at the brake temperatures?
Jim C
On Fri, Nov 2, 2018 at 6:02 PM Kelly McMullen <apilot2(at)gmail.com (apilot2(at)gmail.com)> wrote:
| Quote: | All you need to "overhaul" caliper is the correct O-ring, unless there are damaged parts. I suppose brake pads as well. | Quote: | | Sent from my IBM-360 main frame |
On Fri, Nov 2, 2018 at 12:32 PM Jim Combs <jiminlexky(at)gmail.com (jiminlexky(at)gmail.com)> wrote:
| Quote: | Great! - Thanks
On Fri, Nov 2, 2018 at 2:46 PM Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
|
|
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
RV-10 -> N312F - Flying as of 12/2008 |
|
| Back to top |
|
|
Jim Combs
Joined: 24 Jan 2010
Posts: 140
Location: Lexington, Ky
|
| Posted: Sat Nov 03, 2018 11:25 am Post subject: Cleveland Brake Caliper Model Number |
|
|
Thanks,
I have already ordered the parts. I did have to buy 25 (Min Qnty) but I want spares and I have two other -10 owners that asked me to order some for them too. So we will share as well.
Thanks, Jim C
On Fri, Nov 2, 2018 at 9:47 PM g.combs <g.combs(at)aerosportmodeling.com (g.combs(at)aerosportmodeling.com)> wrote:
| Quote: | Jim I think I have some that you could have. I can check tomorrow. These are the Viton that Tim is talking about. Also I used the Royco 756, Higher flash point.
I did get them at McMaster
Geoff
Sent from my iPhoneGeoff Combs
Aerosport Modeling & Design
On Nov 2, 2018, at 9:28 PM, Tim Olson <Tim(at)MyRV10.com (Tim(at)MyRV10.com)> wrote:
| Quote: |
I think I got some from a friend in a split order from McMaster Carr. We switched to Viton for I think higher temp resistance. It’s been a looooong time now. I use the synthetic version of aviation brake fluid.
Tim
On Nov 2, 2018, at 5:41 PM, Jim Combs <jiminlexky(at)gmail.com (jiminlexky(at)gmail.com)> wrote:
| Quote: | Where can I get a correct o-ring made from a material that is compatible with the fluid and will work at the brake temperatures?
Jim C
On Fri, Nov 2, 2018 at 6:02 PM Kelly McMullen <apilot2(at)gmail.com (apilot2(at)gmail.com)> wrote:
| Quote: | All you need to "overhaul" caliper is the correct O-ring, unless there are damaged parts. I suppose brake pads as well. | Quote: | | Sent from my IBM-360 main frame |
On Fri, Nov 2, 2018 at 12:32 PM Jim Combs <jiminlexky(at)gmail.com (jiminlexky(at)gmail.com)> wrote:
| Quote: | Great! - Thanks
On Fri, Nov 2, 2018 at 2:46 PM Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
|
|
|
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
RV-10 -> N312F - Flying as of 12/2008 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
