 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
r.twellmann(at)steute.com
Guest
|
 Posted: Tue Nov 13, 2018 11:59 pm Post subject: AW: Re: Can anyone help me with a wing template? |
 |
|
Hello,
here is a DXF file of the airfoil with the appropriate cord length of 1167 mm. (yes, we use the metric system  )
I also added the 3 degree line you need to set the wing to the right angle.
You should find somebody who has access to a big format printer to print it out for you.
Good luck with the construction of your plane and don`t hesitate to ask if you have further questions.
Best regards from Germany,
Ralf Twellmann (KIS# 104)
Tel.: +49 / (0)5731 745-158
Fax: +49 / (0)5731 745-222
mailto:r.twellmann(at)steute.com
http://www.steute.com
-----Urspr�ngliche Nachricht-----
Von: owner-kis-list-server(at)matronics.com [mailto:owner-kis-list-server(at)matronics.com] Im Auftrag von threetracker
Gesendet: Mittwoch, 14. November 2018 05:26
An: kis-list(at)matronics.com
Betreff: Re: Can anyone help me with a wing template?
Tim has suggested that since the TR-1 wing is a straight wing someone could remove a wingtip and trace the planform for me. I do have the molded wing tips and I'm going to see how the traced shape looks for constructing a template.
Thank you Tm. It might just work and it's at least worth a try. I can carefully see how accurate a shape I can get off of two wing tips where they attach to the end of the wings. That is still more accurate than a guess at the shape based on ribs and skins.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=484997#484997
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
| Description: |
|
Download |
| Filename: |
NACA_63-215_with_3_Degrees.DXF |
| Filesize: |
68.64 KB |
| Downloaded: |
405 Time(s) |
|
|
| Back to top |
|
 |
Robert Reed
Joined: 22 Oct 2009
Posts: 331
Location: Dallas/Ft.Worth
|
| Posted: Wed Nov 14, 2018 5:31 am Post subject: AW: Re: Can anyone help me with a wing template? |
|
|
Thank you Ralf, it’s great that after all this time the KIS builders are still supporting each other.
Thank you
Bob Reed
Sent from my iPhone
| Quote: | On Nov 14, 2018, at 1:58 AM, Twellmann, Ralf <r.twellmann(at)steute.com> wrote:
Hello,
here is a DXF file of the airfoil with the appropriate cord length of 1167 mm. (yes, we use the metric system )
I also added the 3 degree line you need to set the wing to the right angle.
You should find somebody who has access to a big format printer to print it out for you.
Good luck with the construction of your plane and don`t hesitate to ask if you have further questions.
Best regards from Germany,
Ralf Twellmann (KIS# 104)
Tel.: +49 / (0)5731 745-158
Fax: +49 / (0)5731 745-222
mailto:r.twellmann(at)steute.com
http://www.steute.com
-----Ursprüngliche Nachricht-----
Von: owner-kis-list-server(at)matronics.com [mailto:owner-kis-list-server(at)matronics.com] Im Auftrag von threetracker
Gesendet: Mittwoch, 14. November 2018 05:26
An: kis-list(at)matronics.com
Betreff: Re: Can anyone help me with a wing template?
Tim has suggested that since the TR-1 wing is a straight wing someone could remove a wingtip and trace the planform for me. I do have the molded wing tips and I'm going to see how the traced shape looks for constructing a template.
Thank you Tm. It might just work and it's at least worth a try. I can carefully see how accurate a shape I can get off of two wing tips where they attach to the end of the wings. That is still more accurate than a guess at the shape based on ribs and skins.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=484997#484997
<NACA 63-215 with 3 Degrees.DXF>
|
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
r.twellmann(at)steute.com
Guest
|
| Posted: Wed Nov 14, 2018 9:48 am Post subject: AW: Re: Can anyone help me with a wing template? |
|
|
My pleasure, Bob.
I forgot to mention that different from the drawing i sent, the airfoil on the KIS has no crusp at the trailing edge (the shape is not curved inwards) but straight. So simply replace the curve in the aileron/ flap area with a straight line. This was done to simplify construction.
Regards, Ralf
| Quote: | Am 14.11.2018 um 14:33 schrieb Robert Reed <robertr237(at)att.net>:
Thank you Ralf, it’s great that after all this time the KIS builders are still supporting each other.
Thank you
Bob Reed
Sent from my iPhone
> On Nov 14, 2018, at 1:58 AM, Twellmann, Ralf <r.twellmann(at)steute.com> wrote:
>
> Hello,
>
> here is a DXF file of the airfoil with the appropriate cord length of 1167 mm. (yes, we use the metric system )
> I also added the 3 degree line you need to set the wing to the right angle.
> You should find somebody who has access to a big format printer to print it out for you.
> Good luck with the construction of your plane and don`t hesitate to ask if you have further questions.
>
> Best regards from Germany,
> Ralf Twellmann (KIS# 104)
>
>
> Tel.: +49 / (0)5731 745-158
> Fax: +49 / (0)5731 745-222
> mailto:r.twellmann(at)steute.com
> http://www.steute.com
>
>
> -----Ursprüngliche Nachricht-----
> Von: owner-kis-list-server(at)matronics.com [mailto:owner-kis-list-server(at)matronics.com] Im Auftrag von threetracker
> Gesendet: Mittwoch, 14. November 2018 05:26
> An: kis-list(at)matronics.com
> Betreff: Re: Can anyone help me with a wing template?
>
>
>
> Tim has suggested that since the TR-1 wing is a straight wing someone could remove a wingtip and trace the planform for me. I do have the molded wing tips and I'm going to see how the traced shape looks for constructing a template.
>
> Thank you Tm. It might just work and it's at least worth a try. I can carefully see how accurate a shape I can get off of two wing tips where they attach to the end of the wings. That is still more accurate than a guess at the shape based on ribs and skins.
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=484997#484997
>
>
>
>
>
>
>
>
>
> <NACA 63-215 with 3 Degrees.DXF>
|
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
