Matronics Email Lists :: View topic - XS Port wing stiffener misalignment

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

XS Port wing stiffener misalignment

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

barp99(at)gmail.com
Guest

Posted: Fri Jan 25, 2019 6:59 pm Post subject: XS Port wing stiffener misalignment

I have just commenced build work on my XS wings, and have found that the 

spanwise stiffener on the underside of the Port wing closure panel does 

not line up with the rebates in the ribs, causing the skin to sit too 

high and preventing a bond to the ribs, see spanwise photo. What have 

others done who have been through this issue?

Many thanks,



Brian Phillips

Builder 489

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

P1253686.jpg

Description:

Filesize:

40.94 KB

Viewed:

3566 Time(s)

Richard Wheelwright

Joined: 15 Sep 2008
Posts: 111
Location: Halifax, West Yorkshire, UK

Posted: Fri Jan 25, 2019 11:14 pm Post subject: XS Port wing stiffener misalignment

Hi Brian  

       There is a fix for this. It may be on the LAA website of the Europa club website. 



Regards



Richard

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Richard Wheelwright
G-IRPW
First Flight 24th July 2013

Last edited by Richard Wheelwright on Sat Jan 26, 2019 11:55 am; edited 1 time in total

alan.twigg775(at)gmail.co
Guest

Posted: Fri Jan 25, 2019 11:46 pm Post subject: XS Port wing stiffener misalignment

Brian, looks like the stiffener has been bonded to the wrong side if the marked line. EUROPA might (should ) be able to sort this out. 

Dear old Nev would have cut it off and re bonded in the correct position but if EUROPA cannot help, Andy Draper at LAA HQ will know the way to proceed.

Regards

Alan Twigg

Kit 463 ( Long wings )

Sent from my iPad



 	  Quote: 	
		   On 26 Jan 2019, at 02:59, Brian Phillips <barp99(at)gmail.com> wrote:

 

 I have just commenced build work on my XS wings, and have found that the spanwise stiffener on the underside of the Port wing closure panel does not line up with the rebates in the ribs, causing the skin to sit too high and preventing a bond to the ribs, see spanwise photo. What have others done who have been through this issue?

 

 

 Many thanks,

 

 Brian Phillips

 Builder 489

 <P1253686.jpg>

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Kelvin Weston

Joined: 14 Apr 2010
Posts: 90
Location: Hampshire, UK

Posted: Sat Jan 26, 2019 1:05 am Post subject: Re: XS Port wing stiffener misalignment

Hi Brian



Have a look at the Tech Info on the Europa website:



http://www.europa-aircraft.co.uk/updates/



Service Bulletin 8 addresses this problem.



It is also worth having a browse through the Tech Talk section. There is a lot of good information that addresses a lot of the 'little anomolies' you will come across as you progress through your build.



Lots of good information on the Europa Club website if you are a member.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Regards

Kelv Weston
Kit 497
kelv@kdweston.co.uk

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum