Matronics Email Lists :: View topic - Need KT-70 pinout and instruction manual.

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Need KT-70 pinout and instruction manual.

Matronics Email Lists Forum Index -> Avionics-List

View previous topic :: View next topic

Author Message

galsys(at)bezeqint.net
Guest

Posted: Wed Sep 02, 2009 11:26 pm Post subject: Need KT-70 pinout and instruction manual.

Hi 



I am in need of the KT-70 mode S transponder pinout and operating manual.



Thanks,



Gabe

Gaby_Levin.vcf

Description:

Download

Filename:

Gaby_Levin.vcf

Filesize:

337 Bytes

Downloaded:

1711 Time(s)

don.curry(at)inbox.com
Guest

Posted: Thu Sep 03, 2009 1:14 am Post subject: Need KT-70 pinout and instruction manual.

 	  Quote: 	
		   I am in need of the KT-70 mode S transponder pinout and operating manual.

 Gabe


	


Here's an excerpt from a manual on King Silver Crown equipment.  It is the

closest thing to an operating manual I have seen.  Hope it helps.

Don



[quote] --

Pilot_Guides_-_King_Silver_Crown_PG,_KT-70.pdf

Description:

Download

Filename:

Pilot_Guides_-_King_Silver_Crown_PG,_KT-70.pdf

Filesize:

164.05 KB

Downloaded:

4892 Time(s)

galsys(at)bezeqint.net
Guest

Posted: Thu Sep 03, 2009 1:55 am Post subject: Need KT-70 pinout and instruction manual.

Thanks Don,



It helped me a lot.



I will have to digg for  pinout as well.

thanks again.



Gaby

---

galsys(at)bezeqint.net
Guest

Posted: Thu Sep 03, 2009 1:55 am Post subject: Need KT-70 pinout and instruction manual.

Hi Don,



Do you know how to programm the  unique aircraft 8 digit codes ?



Thanks,



Gaby

---

don.curry(at)inbox.com
Guest

Posted: Thu Sep 03, 2009 2:08 am Post subject: Need KT-70 pinout and instruction manual.

That information is in the install manual, which I sent directly to your

email address (it was too large for Matronics).

Don



[quote] --

galsys(at)bezeqint.net
Guest

Posted: Thu Sep 03, 2009 2:17 am Post subject: Need KT-70 pinout and instruction manual.

Ok,

Thanks,

I'll await for the installation manual

---

n4291p

Joined: 14 Sep 2009
Posts: 1

Posted: Mon Sep 14, 2009 2:56 am Post subject: Re: Need KT-70 pinout and instruction manual.

Hello Don,



I to need a pin out and operating manual for the KT-70 mode S transponder and do you know how to program the aircraft 8 digit codes 



Thanks for your help. 

Jan Prikkel jr

pipercomp

Joined: 16 Dec 2018
Posts: 2

Posted: Mon Dec 17, 2018 10:41 am Post subject: Re: Need KT-70 pinout and instruction manual.

[quote="don.curry(at)inbox.com"] 	  Quote: 	
		   I am in need of the KT-70 mode S transponder pinout and operating manual.

 Gabe



	


Here's an excerpt from a manual on King Silver Crown equipment.  It is the

closest thing to an operating manual I have seen.  Hope it helps.

Don



 	  Quote: 	
		   -- 	


Hi I'm not sure how to use this site and my request is a bit cheeky but I'm  also looking for information on how to program a Kt 70 to take the aircraft code. I have looked everywhere and had no luck

Any help will be much appreciated

 Steve Charters

pipercomp

Joined: 16 Dec 2018
Posts: 2

Posted: Mon Dec 17, 2018 10:11 pm Post subject: Re: Need KT-70 pinout and instruction manual.

I also have a CD with most of the Bendix King Kit pinouts if anyone needs anything

Jackeyb

Joined: 11 Mar 2019
Posts: 1

Posted: Mon Mar 11, 2019 9:36 am Post subject: Re: Need KT-70 pinout and instruction manual.

Hi I am also looking for the install manual for KT 70 transonder

and pin out for same

Display posts from previous:

	Matronics Email Lists Forum Index -> Avionics-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum