Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

tach generator upkeep

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
draftsjust417(at)gmail.co
Guest





PostPosted: Sun Apr 05, 2020 7:49 am    Post subject: tach generator upkeep Reply with quote

Morning all,

Fast question re: the Housai's tiny tach generator for prop rpm indication.
In the midst of my cond insp, and the RPA checklist notes the tach gen should be removed and "disassembled and bearings repacked with grease."
I've yet to disassemble one.
Where are these bearings (ie- how get to them)?
What grease have y'all successfully used?
Tach gen maint tips & thoughts much appreciated...
Justin Drafts
N280NC
Seattle


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
n13472(at)aol.com
Guest





PostPosted: Sun Apr 05, 2020 12:29 pm    Post subject: tach generator upkeep Reply with quote

Note it reads Engine RPM not prop


Tom Elliott
CJ-6A NX63727
777 Quartz Ave
PMB 7004
Sandy Valley NV.
89019
Cell 541-297-5497
N13472(at)AOL.COM

 

From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Justin Drafts
Sent: Sunday, April 05, 2020 8:48 AM
To: yak-list(at)matronics.com
Subject: Re: tach generator upkeep

Morning all,


Fast question re: the Housai's tiny tach generator for prop rpm indication.



In the midst of my cond insp, and the RPA checklist notes the tach gen should be removed and "disassembled and bearings repacked with grease."



I've yet to disassemble one.

Where are these bearings (ie- how get to them)?

What grease have y'all successfully used?

Tach gen maint tips & thoughts much appreciated...



Justin Drafts

N280NC

Seattle


Virus-free. www.avg.com [url=#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
JB Soar



Joined: 19 Apr 2019
Posts: 20

PostPosted: Sun Apr 05, 2020 4:42 pm    Post subject: tach generator upkeep Reply with quote

The tachometer generator is heavy and cumbersome.  One solution is a Horizon tachometer.  These work well, and you can remove several pounds of weight from your aircraft.John B
On Sun, Apr 5, 2020 at 6:58 PM Justin Drafts <draftsjust417(at)gmail.com (draftsjust417(at)gmail.com)> wrote:

Quote:
Ok-Any experiences(s) with a good lube/grease for the tach gen bearings?Justin

On Sun, Apr 5, 2020, 1:26 PM Tom Elliott <n13472(at)aol.com (n13472(at)aol.com)> wrote:

Quote:

Note it reads Engine RPM not prop
 
 
Tom Elliott
CJ-6A NX63727
777 Quartz Ave
PMB 7004
Sandy Valley NV.
89019
Cell 541-297-5497
N13472(at)AOL.COM (N13472(at)AOL.COM)
 
 
 
From: owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com) [mailto:owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com)] On Behalf Of Justin Drafts
Sent: Sunday, April 05, 2020 8:48 AM
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: tach generator upkeep
 
Morning all,
 

Fast question re: the Housai's tiny tach generator for prop rpm indication.

 

In the midst of my cond insp, and the RPA checklist notes the tach gen should be removed and "disassembled and bearings repacked with grease."

 

I've yet to disassemble one.

Where are these bearings (ie- how get to them)?

What grease have y'all successfully used?

Tach gen maint tips & thoughts much appreciated...

 

Justin Drafts

N280NC

Seattle

 

Virus-free. www.avg.com [url=#m_3604026294378880283_m_-3922224016462409558_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]




- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
View user's profile Send private message
draftsjust417(at)gmail.co
Guest





PostPosted: Mon Apr 06, 2020 9:33 am    Post subject: tach generator upkeep Reply with quote

Great info, thanks...(Mine is the small, engine-mounted variety)
Justin
On Mon, Apr 6, 2020, 9:44 AM Walter Lannon <wlannon(at)shaw.ca (wlannon(at)shaw.ca)> wrote:

Quote:
Justin;
 
If you have the later ENGINE mounted Tach. gen. re-greasing of the bearings would be likely a 300-500 hr. unit overhaul function.

 

If you have the original FIREWALL mounted, cable driven unit, just  throw it away and get the later one from Doug Sapp.

 

Cheers;

Walt


From: Justin Drafts (draftsjust417(at)gmail.com) Sent: Sunday, April 05, 2020 4:49 PM
To: Tom Elliott (N13472(at)aol.com)
Subject: Re: Re: tach generator upkeep
 

Ok- Any experiences(s) with a good lube/grease for the tach gen bearings? Justin
 
On Sun, Apr 5, 2020, 1:26 PM Tom Elliott <n13472(at)aol.com (n13472(at)aol.com)> wrote:

Quote:

Note it reads Engine RPM not prop
 
 
Tom Elliott
CJ-6A NX63727
777 Quartz Ave
PMB 7004
Sandy Valley NV.
89019
Cell 541-297-5497
N13472(at)AOL.COM (N13472(at)AOL.COM)
 
 
 
From: owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com) [mailto:owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com)] On Behalf Of Justin Drafts
Sent: Sunday, April 05, 2020 8:48 AM
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: tach generator upkeep
 
Morning all,
 

Fast question re: the Housai's tiny tach generator for prop rpm indication.

 

In the midst of my cond insp, and the RPA checklist notes the tach gen should be removed and "disassembled and bearings repacked with grease."

 

I've yet to disassemble one.

Where are these bearings (ie- how get to them)?

What grease have y'all successfully used?

Tach gen maint tips & thoughts much appreciated...

 

Justin Drafts

N280NC

Seattle

 

Virus-free. www.avg.com






- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
threein60



Joined: 04 Feb 2016
Posts: 51
Location: Everett Wa

PostPosted: Mon Apr 06, 2020 9:49 am    Post subject: tach generator upkeep Reply with quote

Justin. Message me your number again. Not sure I have your latest.Larry
Sent from Yahoo Mail for iPhone
On Monday, April 6, 2020, 10:44, Justin Drafts <draftsjust417(at)gmail.com> wrote:
Quote:
Great info, thanks...(Mine is the small, engine-mounted variety)
Justin

On Mon, Apr 6, 2020, 9:44 AM Walter Lannon <wlannon(at)shaw.ca (wlannon(at)shaw.ca)> wrote:
Quote:
Justin;

If you have the later ENGINE mounted Tach. gen. re-greasing of the bearings would be likely a 300-500 hr. unit overhaul function.



If you have the original FIREWALL mounted, cable driven unit, just throw it away and get the later one from Doug Sapp.



Cheers;

Walt


From: Justin Drafts (draftsjust417(at)gmail.com) Sent: Sunday, April 05, 2020 4:49 PM
To: Tom Elliott (N13472(at)aol.com)
Subject: Re: Re: tach generator upkeep


Ok- Any experiences(s) with a good lube/grease for the tach gen bearings? Justin

On Sun, Apr 5, 2020, 1:26 PM Tom Elliott <n13472(at)aol.com (n13472(at)aol.com)> wrote:
Quote:

Note it reads Engine RPM not prop


Tom Elliott
CJ-6A NX63727
777 Quartz Ave
PMB 7004
Sandy Valley NV.
89019
Cell 541-297-5497
N13472(at)AOL.COM (N13472(at)AOL.COM)



From: owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com) [mailto:owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com)] On Behalf Of Justin DraftsSent: Sunday, April 05, 2020 8:48 AMTo: yak-list(at)matronics.com (yak-list(at)matronics.com)Subject: Re: tach generator upkeep

Morning all,


Fast question re: the Housai's tiny tach generator for prop rpm indication.



In the midst of my cond insp, and the RPA checklist notes the tach gen should be removed and "disassembled and bearings repacked with grease."



I've yet to disassemble one.

Where are these bearings (ie- how get to them)?

What grease have y'all successfully used?

Tach gen maint tips & thoughts much appreciated...



Justin Drafts

N280NC

Seattle


Virus-free. www.avg.com






- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group