Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Original Mufflers

Matronics Email Lists Forum Index -> Pulsar-List

View previous topic :: View next topic

Author Message

freedom4life(at)xtra.co.n
Guest

Posted: Mon Jul 01, 2019 9:14 pm Post subject: Original Mufflers

Hi Mark



I know exactly what you are talking about with cracked mufflers all the 

time. I copied what one of the builders on here had done and now have 

over 2000 hours on these now without any further cracking. Someone on 

the forum will tell you who made them. If you have someone who is good 

with a tig welder on stainless you shouldn't have too much bother making 

some yourself like I did.



Cliff

 	  Quote: 	
		   Hey guys,



 I have the original exhaust mufflers from 1994 kit - first flight 

 1996. Over the years I have had them crack 4 times but the most recent 

 has been twice within 8 hours 



 I have added gussets to strengthen them and a bar stock connecting the 

 muffler to the engine to sync vibration with the motor many years ago. 

 This has worked great for 7-8 year blocks..I put in a new radiator on 

 last year. The old one required the coolant hose to sit against the 

 exhaust. I built a ventilation path to keep it cool that worked.



 Anyway the new radiator doesn't have that rubber hose to dampen the 

 vibration so I think that is the change that caused 2 failures back to 

 back.



 Now there isn't really enough basic metal to weld to anymore 



 I know a decade or so ago this group was working on stainless steel 

 ones with some moderate luck.



 Bottom line -  what is everyone using now for the pulsar XP exhaust? 

 Did someone finally find a design at works and has them for sale ?



 Thanks



 Mark L. Fox


	


---

This email has been checked for viruses by AVG.

https://www.avg.com

briana(at)xtra.co.nz
Guest

Posted: Mon Jul 01, 2019 10:31 pm Post subject: Original Mufflers

It was Rick Thomason who designed and made the alternative version. Quite a long time ago now, but I think he may also have published some drawings so that builders could make a copy.

Rick used to be active on this forum. It is also possible to find his email address with a quick name search.

Brian

 	  Quote: 	
		   On 2/07/2019, at 1:13 PM, Cliff McChesney <freedom4life(at)xtra.co.nz> wrote:

 Hi Mark

 I know exactly what you are talking about with cracked mufflers all the time. I copied what one of the builders on here had done and now have over 2000 hours on these now without any further cracking. Someone on the forum will tell you who made them. If you have someone who is good with a tig welder on stainless you shouldn't have too much bother making some yourself like I did.

 Cliff

> Hey guys,

> 

> I have the original exhaust mufflers from 1994 kit - first flight 1996. Over the years I have had them crack 4 times but the most recent has been twice within 8 hours 

> 

> I have added gussets to strengthen them and a bar stock connecting the muffler to the engine to sync vibration with the motor many years ago. This has worked great for 7-8 year blocks..I put in a new radiator on last year. The old one required the coolant hose to sit against the exhaust. I built a ventilation path to keep it cool that worked.

> 

> Anyway the new radiator doesn't have that rubber hose to dampen the vibration so I think that is the change that caused 2 failures back to back.

> 

> Now there isn't really enough basic metal to weld to anymore 

> 

> I know a decade or so ago this group was working on stainless steel ones with some moderate luck.

> 

> Bottom line -  what is everyone using now for the pulsar XP exhaust? Did someone finally find a design at works and has them for sale ?

> 

> Thanks

> 

> Mark L. Fox

 ---

 This email has been checked for viruses by AVG.

 https://www.avg.com

MikeyC

Joined: 24 Jan 2017
Posts: 21
Location: 1GA0

Posted: Tue Jul 02, 2019 5:06 am Post subject: Original Mufflers

Mark,

I have a muffler from a Skystar FWF kit.  Not planning to use it.

Mike Cowan



On Tue, Jul 2, 2019 at 2:34 AM Brian Anderson <briana(at)xtra.co.nz (briana(at)xtra.co.nz)> wrote:



 	  Quote: 	
		  --> Pulsar-List message posted by: Brian Anderson <briana(at)xtra.co.nz (briana(at)xtra.co.nz)>

 

 It was Rick Thomason who designed and made the alternative version. Quite a long time ago now, but I think he may also have published some drawings so that builders could make a copy.

 

 Rick used to be active on this forum. It is also possible to find his email address with a quick name search.

 

 Brian

 

 

 > On 2/07/2019, at 1:13 PM, Cliff McChesney <freedom4life(at)xtra.co.nz (freedom4life(at)xtra.co.nz)> wrote:

 > 

 > --> Pulsar-List message posted by: Cliff McChesney <freedom4life(at)xtra.co.nz (freedom4life(at)xtra.co.nz)>

 > 

 > 

 > Hi Mark

 > 

 > I know exactly what you are talking about with cracked mufflers all the time. I copied what one of the builders on here had done and now have over 2000 hours on these now without any further cracking. Someone on the forum will tell you who made them. If you have someone who is good with a tig welder on stainless you shouldn't have too much bother making some yourself like I did.

 > 

 > Cliff

 >> Hey guys,

 >> 

 >> I have the original exhaust mufflers from 1994 kit - first flight 1996. Over the years I have had them crack 4 times but the most recent has been twice within 8 hours 

 >> 

 >> I have added gussets to strengthen them and a bar stock connecting the muffler to the engine to sync vibration with the motor many years ago. This has worked great for 7-8 year blocks..I put in a new radiator on last year. The old one required the coolant hose to sit against the exhaust. I built a ventilation path to keep it cool that worked.

 >> 

 >> Anyway the new radiator doesn't have that rubber hose to dampen the vibration so I think that is the change that caused 2 failures back to back.

 >> 

 >> Now there isn't really enough basic metal to weld to anymore 

 >> 

 >> I know a decade or so ago this group was working on stainless steel ones with some moderate luck.

 >> 

 >> Bottom line -  what is everyone using now for the pulsar XP exhaust? Did someone finally find a design at works and has them for sale ?

 >> 

 >> Thanks

 >> 

 >> Mark L. Fox

 > 

 > ---

 > This email has been checked for viruses by AVG.

 > https://www.avg.com

 > 

 > 

 > 

 > 

 

 

 ===========

 ar-List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?Pulsar-List

 ===========

  FORUMS -

 _blank" rel="noreferrer">http://forums.matronics.com

 ===========

 WIKI -

 lank" rel="noreferrer">http://wiki.matronics.com

 ===========

 b Site -

           -Matt Dralle, List Admin.

 target="_blank" rel="noreferrer">http://www.matronics.com/contribution

 ===========

_________________
Mike Cowan

DiscoverPulsar

Joined: 24 Jan 2019
Posts: 10

Posted: Tue Jul 02, 2019 6:19 am Post subject: Original Mufflers

Hi Mark,

There is a Yahoo Pulsar Group with drawings of Rick Thomson’s exhaust. Here is the link to the first drawing but you may need to join the group to access it. I’m not sure.

Hope this helps,

Ned 

https://xa.yimg.com/df/Pulsar-Aviators/Pulsar+Exhaust+drawings_0001.jpg?token=GuvANfOvM09_lrPWgTwlKBFRJkMD8F2hZVUAiBZkm3sTDdoufsx3aOujQeX6BQiQVm7L4Y6_xcqqxUX2MozaIpjQllUI8bwXwgcZqX6153sNpFqUYzNWr6JDkiRqNgv2PUp1YZLEnifEWCfhWAhB72wIb4cB51fgLqUvlLpJquIWzqzmwBnmABA&type=download





On Jul 1, 2019, at 6:03 PM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:

Hey guys,



I have the original exhaust mufflers from 1994 kit - first flight 1996. Over the years I have had them crack 4 times but the most recent has been twice within 8 hours 

I have added gussets to strengthen them and a bar stock connecting the muffler to the engine to sync vibration with the motor many years ago. This has worked great for 7-8 year blocks..I put in a new radiator on last year. The old one required the coolant hose to sit against the exhaust. I built a ventilation path to keep it cool that worked.

Anyway the new radiator doesn't have that rubber hose to dampen the vibration so I think that is the change that caused 2 failures back to back.

Now there isn't really enough basic metal to weld to anymore 

I know a decade or so ago this group was working on stainless steel ones with some moderate luck.



Bottom line -  what is everyone using now for the pulsar XP exhaust? Did someone finally find a design at works and has them for sale ?

Thanks

Mark L. Fox

DiscoverPulsar

Joined: 24 Jan 2019
Posts: 10

Posted: Tue Jul 02, 2019 6:24 am Post subject: Original Mufflers

Here is the group home page

https://groups.yahoo.com/neo/groups/Pulsar-Aviators/info

And here are the 3 photos of Thompson’s drawings

[img]cid:252B6553-7DE3-49DF-AAF2-7C9BD925693A[/img][img]cid:7787096E-A59B-4D68-8883-C2F5B68A8094[/img][img]cid:176A3E68-8F05-40F5-9AED-DE551C1D1932[/img]



On Jul 1, 2019, at 6:03 PM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:

Hey guys,



I have the original exhaust mufflers from 1994 kit - first flight 1996. Over the years I have had them crack 4 times but the most recent has been twice within 8 hours 

I have added gussets to strengthen them and a bar stock connecting the muffler to the engine to sync vibration with the motor many years ago. This has worked great for 7-8 year blocks..I put in a new radiator on last year. The old one required the coolant hose to sit against the exhaust. I built a ventilation path to keep it cool that worked.

Anyway the new radiator doesn't have that rubber hose to dampen the vibration so I think that is the change that caused 2 failures back to back.

Now there isn't really enough basic metal to weld to anymore 

I know a decade or so ago this group was working on stainless steel ones with some moderate luck.



Bottom line -  what is everyone using now for the pulsar XP exhaust? Did someone finally find a design at works and has them for sale ?

Thanks

Mark L. Fox

image1.jpeg

Description:

Filesize:

1.13 MB

Viewed:

10777 Time(s)

image2.jpeg

Description:

Filesize:

1020.68 KB

Viewed:

10777 Time(s)

image3.jpeg

Description:

Filesize:

2.13 MB

Viewed:

10777 Time(s)

kenw

Joined: 01 Oct 2015
Posts: 25
Location: Oklahoma City

Posted: Fri Feb 12, 2021 2:48 pm Post subject: Re: Original Mufflers

Do any members have pics of Rick Thomason mufflers .?

Thank you in advance.

_________________
kenw

ghf4986(at)gmail.com
Guest

Posted: Fri Feb 12, 2021 3:28 pm Post subject: Original Mufflers

Knew,

There was an engineering drawing made and it is in the files, unfortunately I can not direct you to it but you should be able to find it.

Dennis



Sent from an IPad 



On Feb 12, 2021, at 3:51 PM, kenw <worthken67(at)gmail.com> wrote:







Do any members have pics of Rick Thomason mufflers .?

Thank you in advance.



--------

kenw





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=500661#500661

phil(at)ishml.com
Guest

Posted: Fri Feb 12, 2021 3:33 pm Post subject: Original Mufflers

Drawings and pics are at the groups.io site...

https://groups.io/g/Pulsar-Aviators 



Phil



--

kenw

Joined: 01 Oct 2015
Posts: 25
Location: Oklahoma City

Posted: Fri Feb 12, 2021 3:40 pm Post subject: Re: Original Mufflers

Thank you Sir !  That’s helpful.

I was able to find 1 pic.

F44646AE-2D48-4BEA-BFC4-0CA562A74D7F.png

Description:

Filesize:

31.72 KB

Viewed:

8282 Time(s)

_________________
kenw

Eclat2

Joined: 06 Sep 2013
Posts: 13
Location: Minneapolis, Minnesota, USA

Posted: Fri Feb 12, 2021 3:47 pm Post subject: Original Mufflers

Look in the Photos section.   The 2nd folder is "Exhaust", and I just put 3 JPEGs in there.   They're sketches of Ricky Thomason's exhaust for the 912.



It made more sense to me to put them in the Files section, since they were more 'tech' than 'pretty'.  But the system wouldn't allow 'photos' in the Files section, and told me to put them in the Photos section.



Regards,

Tim Engel

02/12/2021, 5:33PM, Phil Ishmael, phil(at)ishml.com wrote:

 	  Quote: 	
		   

 

 

 Drawings and pics are at the groups.io site...

 https://groups.io/g/Pulsar-Aviators 

 

 Phil

Eclat2

Joined: 06 Sep 2013
Posts: 13
Location: Minneapolis, Minnesota, USA

Posted: Fri Feb 12, 2021 4:08 pm Post subject: Original Mufflers

I just did a little browse of the Files section on Groups.io, and found duplicates of the three sketches that I just uploaded in the Photos section.



Photos:

https://groups.io/g/Pulsar-Aviators/album?id=260646



Or, go to 'Files.   Then scroll down & open the "Modification - Airframe & Engine" folder, and finally, open the "Exhaust - 912 XP by Ricky Thomason" folder.



Files:

https://groups.io/g/Pulsar-Aviators/files/Modification%20-%20Airframe%20&%20Engine



They're large files, burning up storage space.   So rather than leaving duplicates, I'll delete mine from the 'Photos' section in a few days... after Ken has had a chance to find & download what he needs.



Regards,

Tim Engel

02/12/2021, 5:45PM, Tim Engel, tsengel(at)comcast.net wrote:

 	  Quote: 	
		   

 

 

 Look in the Photos section.   The 2nd folder is "Exhaust", and I just put 3 JPEGs in there.   They're sketches of Ricky Thomason's exhaust for the 912.

 

 It made more sense to me to put them in the Files section, since they were more 'tech' than 'pretty'.  But the system wouldn't allow 'photos' in the Files section, and told me to put them in the Photos section.

 

 Regards,

 Tim Engel

Display posts from previous:

	Matronics Email Lists Forum Index -> Pulsar-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum