Matronics Email Lists :: View topic - Ray Allen trim servo/control: actual wiring schematic neede

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Ray Allen trim servo/control: actual wiring schematic neede

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

ceengland7(at)gmail.com
Guest

Posted: Tue Jul 16, 2019 10:09 am Post subject: Ray Allen trim servo/control: actual wiring schematic neede

On 7/16/2019 12:43 PM, user9253 wrote:

 	  Quote: 	
		   



 Do you have these pdf documents from Ray Allen?

 http://www.rayallencompany.com/RACmedia/instructionsG2grip.pdf



 http://www.rayallencompany.com/RACmedia/do-it-urself1servorelays.pdf



 Here is Bob N's circuit:

 http://aeroelectric.com/PPS/Flight/Trim/Stick_Grip_Trim.pdf



 --------

 Joe Gores



Hi Joe,
	




I've got the RA cartoon docs. Bob's type of drawing, showing the relay & 

switch terminals/internal connections, is what I'm hoping to find for 

the RA parts.



Thanks,



Charlie



---

This email has been checked for viruses by Avast antivirus software.

https://www.avast.com/antivirus

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

ceengland7(at)gmail.com
Guest

Posted: Wed Jul 17, 2019 5:01 am Post subject: Ray Allen trim servo/control: actual wiring schematic neede

On Tue, Jul 16, 2019 at 2:15 PM Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:



 	  Quote: 	
		     	  Quote: 	
		    	  Quote: 	
		  	
Hi Joe,



 I've got the RA cartoon docs. Bob's type of drawing, showing the relay & switch terminals/internal connections, is what I'm hoping to find for the RA parts.



 Thanks,



 Charlie 	


   Check through the collection of drawings at



  https://tinyurl.com/y6yxkbb8



   If you're a CAD-driver and can read .dwg

   files, I can supply originals for all/any

   of those .pdfs



 

 

   Bob . . .

	




Thanks Bob; the trim.pdf is a good starting point for me. Unfortunately, I haven't had the time yet to become CAD-literate.

Charlie

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Eric M. Jones

Joined: 10 Jan 2006
Posts: 565
Location: Massachusetts

Posted: Wed Jul 17, 2019 8:16 am Post subject: Re: Ray Allen trim servo/control: actual wiring schematic n

Hi Charlie, 



I have a bunch and have posted some over the years. Here is the Trim box.



Eric

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

TSCMR_Installation Manual.pdf

Description:

Download

Filename:

TSCMR_Installation Manual.pdf

Filesize:

416.51 KB

Downloaded:

377 Time(s)

_________________
Eric M. Jones
www.PerihelionDesign.com
113 Brentwood Drive
Southbridge, MA 01550
(508) 764-2072
emjones(at)charter.net

ceengland7(at)gmail.com
Guest

Posted: Sun Jul 21, 2019 9:49 am Post subject: Ray Allen trim servo/control: actual wiring schematic neede

On 7/17/2019 11:16 AM, Eric M. Jones wrote:

 	  Quote: 	
		   



 Hi Charlie,



 I have a bunch and have posted some over the years. Here is the Trim box.



 Eric



 --------

 Eric M. Jones

 www.PerihelionDesign.com

 113 Brentwood Drive

 Southbridge, MA 01550

 (508) 764-2072

 emjones(at)charter.net



Hi Eric,
	




Sorry to be so long in replying. Thanks for the link, and I really like 

the conversion to true servo action in your device. But what I was 

really looking for was  *internal* schematics for the Ray Allen devices. 

One of Bob's drawings has the 'guts' of the servo shown, but no joy on 

the other products.



I'll reply to my earlier post to detail what I found during troubleshooting.



Charlie



---

This email has been checked for viruses by Avast antivirus software.

https://www.avast.com/antivirus

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Eric M. Jones

Joined: 10 Jan 2006
Posts: 565
Location: Massachusetts

Posted: Sun Jul 21, 2019 10:28 am Post subject: Re: Ray Allen trim servo/control: actual wiring schematic n

Sorry Charlie...the Trim box is on the last page. I couldn't find my file of the trim box alone.



Attached is my file of the trim box and the bar graph. I have some others if I can find them...I had all my CAD files on a 32 GB flash drive for safety and ran over it with my office chair. Nothing was recoverable so I am checking old HDs. and backups.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

RAC Trim box and bar graph.pdf

Description:

Download

Filename:

RAC Trim box and bar graph.pdf

Filesize:

176.17 KB

Downloaded:

321 Time(s)

_________________
Eric M. Jones
www.PerihelionDesign.com
113 Brentwood Drive
Southbridge, MA 01550
(508) 764-2072
emjones(at)charter.net

ceengland7(at)gmail.com
Guest

Posted: Sun Jul 21, 2019 12:41 pm Post subject: Ray Allen trim servo/control: actual wiring schematic neede

On 7/21/2019 1:28 PM, Eric M. Jones wrote:

 	  Quote: 	
		   



 Sorry Charlie...the Trim box is on the last page. I couldn't find my file of the trim box alone.



 Attached is my file of the trim box and the bar graph. I have some others if I can find them...I had all my CAD files on a 32 GB flash drive for safety and ran over it with my office chair. Nothing was recoverable so I am checking old HDs. and backups.



 --------

 Eric M. Jones

 www.PerihelionDesign.com

 113 Brentwood Drive

 Southbridge, MA 01550

 (508) 764-2072

 emjones(at)charter.net



Thanks, Eric. Impressive what you get for the money at RA, isn't it? At 
	


$119.00 for that display, it works out to about $109.00 for the little 

box & the label set, after buying the display, pc board, & misc 

components. I started playing with LM3914s about 40 years ago, before 

you could buy the 10 segment displays for 50 cents.



Please don't do any more digging just for me; I've got my problem licked.



Charlie



---

This email has been checked for viruses by Avast antivirus software.

https://www.avast.com/antivirus

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

ceengland7(at)gmail.com
Guest

Posted: Sun Jul 21, 2019 7:12 pm Post subject: Ray Allen trim servo/control: actual wiring schematic neede

Thanks, Dick; got it. My problem was actually the RS2 rocker switch.



Charlie



On 7/21/2019 7:43 PM, Dick Tasker wrote:

 	  Quote: 	
		   Here is what I have for the display module.  It is the LM3914 data 

 sheet marked up with the additional components in the module.  The 

 part labeled "sensor" is the Ray Allen position sensor that works with 

 the display.



 Dick Tasker



 Charlie England wrote:

> 

> <ceengland7(at)gmail.com>

>

> On 7/17/2019 11:16 AM, Eric M. Jones wrote:

>> 

>> <emjones(at)charter.net>

>>

>> Hi Charlie,

>>

>> I have a bunch and have posted some over the years. Here is the Trim 

>> box.

>>

>> Eric

>>

>> --------

>> Eric M. Jones

>> www.PerihelionDesign.com

>> 113 Brentwood Drive

>> Southbridge, MA 01550

>> (508) 764-2072

>> emjones(at)charter.net

>>

> Hi Eric,

>

> Sorry to be so long in replying. Thanks for the link, and I really 

> like the conversion to true servo action in your device. But what I 

> was really looking for was  *internal* schematics for the Ray Allen 

> devices. One of Bob's drawings has the 'guts' of the servo shown, but 

> no joy on the other products.

>

> I'll reply to my earlier post to detail what I found during 

> troubleshooting.

>

> Charlie

>

> ---

> This email has been checked for viruses by Avast antivirus software.

> https://www.avast.com/antivirus

>

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum