 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
flysrv10(at)gmail.com
Guest
|
 Posted: Fri Sep 20, 2019 10:39 am Post subject: NavWorx does not report |
 |
|
Hey guys,
Anyone with a NavWorx 600-B laying around that can loan to me for trouble shooting?
Thanks.
Do not archive.
Rob Kermanj
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
jesse(at)saintaviation.co
Guest
|
| Posted: Fri Sep 20, 2019 11:38 am Post subject: NavWorx does not report |
|
|
I have one.
Jesse Saint
Saint Aviation, Inc.
352-427-0285
jesse(at)saintaviation.com
Sent from my iPad
| Quote: | On Sep 20, 2019, at 2:37 PM, Rob Kermanj <flysrv10(at)gmail.com> wrote:
Hey guys,
Anyone with a NavWorx 600-B laying around that can loan to me for trouble shooting?
Thanks.
Do not archive.
Rob Kermanj
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
flysrv10(at)gmail.com
Guest
|
| Posted: Fri Sep 20, 2019 12:59 pm Post subject: NavWorx does not report |
|
|
Thanks Jessie. U are still in Sebastian, right?
Let me know when I can meet up with u. I appreciate everyone’s quick offer. I am speechless.
Rob
Sent from my iPhone
| Quote: | On Sep 20, 2019, at 3:42 PM, Jesse Saint <jesse(at)saintaviation.com> wrote:

I have one.
Jesse Saint
Saint Aviation, Inc.
352-427-0285
jesse(at)saintaviation.com
Sent from my iPad
> On Sep 20, 2019, at 2:37 PM, Rob Kermanj <flysrv10(at)gmail.com> wrote:
>
>
>
> Hey guys,
>
> Anyone with a NavWorx 600-B laying around that can loan to me for trouble shooting?
>
> Thanks.
>
> Do not archive.
>
> Rob Kermanj
>
>
>
>
>
>
>
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jesse(at)saintaviation.co
Guest
|
| Posted: Fri Sep 20, 2019 1:11 pm Post subject: NavWorx does not report |
|
|
I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com
C: 352-427-0285
F: 815-377-3694
| Quote: | On Sep 20, 2019, at 4:57 PM, Rob Kermanj <flysrv10(at)gmail.com> wrote:
Thanks Jessie. U are still in Sebastian, right?
Let me know when I can meet up with u. I appreciate everyone’s quick offer. I am speechless.
Rob
Sent from my iPhone
> On Sep 20, 2019, at 3:42 PM, Jesse Saint <jesse(at)saintaviation.com> wrote:
>
> 
>
> I have one.
>
> Jesse Saint
> Saint Aviation, Inc.
> 352-427-0285
> jesse(at)saintaviation.com
>
> Sent from my iPad
>
>> On Sep 20, 2019, at 2:37 PM, Rob Kermanj <flysrv10(at)gmail.com> wrote:
>>
>>
>>
>> Hey guys,
>>
>> Anyone with a NavWorx 600-B laying around that can loan to me for trouble shooting?
>>
>> Thanks.
>>
>> Do not archive.
>>
>> Rob Kermanj
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
flysrv10(at)gmail.com
Guest
|
| Posted: Tue Sep 24, 2019 8:14 am Post subject: NavWorx does not report |
|
|
Hi Jesse,
Got the box today. Will install and test this week and let u know.
Thank you so much.
Rob Kermanj
7724181417
Sent from my iPhone
| Quote: | On Sep 20, 2019, at 5:25 PM, Jesse Saint <jesse(at)saintaviation.com> wrote:

I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com
C: 352-427-0285
F: 815-377-3694
> On Sep 20, 2019, at 4:57 PM, Rob Kermanj <flysrv10(at)gmail.com> wrote:
>
>
>
> Thanks Jessie. U are still in Sebastian, right?
>
> Let me know when I can meet up with u. I appreciate everyone’s quick offer. I am speechless.
>
> Rob
>
>
> Sent from my iPhone
>
>>> On Sep 20, 2019, at 3:42 PM, Jesse Saint <jesse(at)saintaviation.com> wrote:
>>
>> 
>>
>> I have one.
>>
>> Jesse Saint
>> Saint Aviation, Inc.
>> 352-427-0285
>> jesse(at)saintaviation.com
>>
>> Sent from my iPad
>>
>>> On Sep 20, 2019, at 2:37 PM, Rob Kermanj <flysrv10(at)gmail.com> wrote:
>>>
>>>
>>>
>>> Hey guys,
>>>
>>> Anyone with a NavWorx 600-B laying around that can loan to me for trouble shooting?
>>>
>>> Thanks.
>>>
>>> Do not archive.
>>>
>>> Rob Kermanj
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>
>
>
>
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
flysrv10(at)gmail.com
Guest
|
| Posted: Sat Sep 28, 2019 10:48 am Post subject: NavWorx does not report |
|
|
Hi jesse,
Just installed your box and the issue remains. NavWorx software sez no GPS position. I guess I might have a bad connection; you agree?
Will FedEX your box on Monday. Thank you again for your help.
Rob Kermanj772-418-1417
| Quote: | On Sep 20, 2019, at 5:09 PM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
--> RV10-List message posted by: Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)>I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
|
[img]cid:48089777-B896-431A-8276-9B3D43D5778D(at)flbb.net[/img][img]cid:EB076C1F-08CA-4F62-B19C-B2D9F0513A1A(at)flbb.net[/img] | Quote: | Jesse SaintSaint Aviation, Inc.jesse(at)saintaviation.com (jesse(at)saintaviation.com)C: 352-427-0285F: 815-377-3694 | Quote: | On Sep 20, 2019, at 4:57 PM, Rob Kermanj <flysrv10(at)gmail.com> wrote:--> RV10-List message posted by: Rob Kermanj <flysrv10(at)gmail.com>Thanks Jessie. U are still in Sebastian, right?Let me know when I can meet up with u. I appreciate everyone’s quick offer. I am speechless. RobSent from my iPhone | Quote: | On Sep 20, 2019, at 3:42 PM, Jesse Saint <jesse(at)saintaviation.com> wrote:--> RV10-List message posted by: Jesse Saint <jesse(at)saintaviation.com>I have one. Jesse SaintSaint Aviation, Inc.352-427-0285jesse(at)saintaviation.comSent from my iPad | Quote: | | On Sep 20, 2019, at 2:37 PM, Rob Kermanj <flysrv10(at)gmail.com> wrote:--> RV10-List message posted by: Rob Kermanj <flysrv10(at)gmail.com>Hey guys,Anyone with a NavWorx 600-B laying around that can loan to me for trouble shooting?Thanks.Do not archive.Rob Kermanj |
|
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
105.68 KB |
| Viewed: |
14189 Time(s) |
|
| Description: |
|
| Filesize: |
85.11 KB |
| Viewed: |
14189 Time(s) |
|
|
|
| Back to top |
|
|
joeyferreyra(at)gmail.com
Guest
|
| Posted: Sat Sep 28, 2019 11:29 am Post subject: NavWorx does not report |
|
|
I wonder if it’s affected with the issues that they were unable to resolve before closing shop?
https://www.aopa.org/news-and-media/all-news/2017/october/20/navworx-calls-it-quits
Joey
On Sat, Sep 28, 2019 at 1:53 PM Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: | Hi jesse,
Just installed your box and the issue remains. NavWorx software sez no GPS position. I guess I might have a bad connection; you agree?
Will FedEX your box on Monday. Thank you again for your help.
Rob Kermanj
772-418-1417
| Quote: | On Sep 20, 2019, at 5:09 PM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
--> RV10-List message posted by: Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)>
I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
|
[img]cid:16d79561eb33476ebef1[/img][img]cid:16d79561eb37f2110f02[/img]
| Quote: | Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
C: 352-427-0285
F: 815-377-3694
| Quote: | On Sep 20, 2019, at 4:57 PM, Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
--> RV10-List message posted by: Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)>
Thanks Jessie. Â Â U are still in Sebastian, right?
Let me know when I can meet up with u. I appreciate everyone’s quick offer. I am speechless. Â
Rob
Sent from my iPhone
|
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
85.11 KB |
| Viewed: |
14189 Time(s) |
|
| Description: |
|
| Filesize: |
105.68 KB |
| Viewed: |
14189 Time(s) |
|
|
|
| Back to top |
|
|
flysrv10(at)gmail.com
Guest
|
| Posted: Sat Sep 28, 2019 11:47 am Post subject: NavWorx does not report |
|
|
Not sure. It has been working fine until a couple of weeks ago. I thought I had disabled NavWorx GPS source and was using IFD540 as GPS Source but studying my wiring diagram from Approach (Fast Stack guys), I cannot tell if there is a a GPS source wired to NavWorx. I am not sure. But I tried NavWorx GPS and IFD GPS and both failed. The mystery is that I have Nexrad weather which must rely on GPS source?
So far, I have swapped transponders, checked my set up in the IFD and swapped NavWorx, so it must be a wiring issue….I think.
Waiting to call Approach guys on Monday to get some clarifications.
Do not archive.
Rob
| Quote: | On Sep 28, 2019, at 3:26 PM, Joey Ferreyra <joeyferreyra(at)gmail.com (joeyferreyra(at)gmail.com)> wrote:
I wonder if it’s affected with the issues that they were unable to resolve before closing shop?
https://www.aopa.org/news-and-media/all-news/2017/october/20/navworx-calls-it-quits
Joey
On Sat, Sep 28, 2019 at 1:53 PM Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: | Hi jesse,
Just installed your box and the issue remains. NavWorx software sez no GPS position. I guess I might have a bad connection; you agree?
Will FedEX your box on Monday. Thank you again for your help.
Rob Kermanj772-418-1417
| Quote: | On Sep 20, 2019, at 5:09 PM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
--> RV10-List message posted by: Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)>I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
|
<IMG_2367.jpeg><IMG_2368.jpeg>
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
phil(at)philyoder.com
Guest
|
| Posted: Sat Sep 28, 2019 11:53 am Post subject: NavWorx does not report |
|
|
The correct protocol needs to be set on both your gps and the Navworx box. Wiring is the last thing I’d suspect if it was working prior. The issues Navworx has never had to do with communications between the gps and their box to my knowledge - but getting it set up properly took done work.Â
What gps are you using?
Phil Yoder.Â
On Sat, Sep 28, 2019 at 3:36 PM Joey Ferreyra <joeyferreyra(at)gmail.com (joeyferreyra(at)gmail.com)> wrote:
| Quote: | I wonder if it’s affected with the issues that they were unable to resolve before closing shop?
https://www.aopa.org/news-and-media/all-news/2017/october/20/navworx-calls-it-quits
Joey
On Sat, Sep 28, 2019 at 1:53 PM Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: | Hi jesse,
Just installed your box and the issue remains. NavWorx software sez no GPS position. I guess I might have a bad connection; you agree?
Will FedEX your box on Monday. Thank you again for your help.
Rob Kermanj
772-418-1417
| Quote: | On Sep 20, 2019, at 5:09 PM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
--> RV10-List message posted by: Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)>
I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
|
[img]cid:16d79561eb33476ebef1[/img][img]cid:16d79561eb37f2110f02[/img]
| Quote: | Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
C: 352-427-0285
F: 815-377-3694
| Quote: | On Sep 20, 2019, at 4:57 PM, Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
--> RV10-List message posted by: Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)>
Thanks Jessie. Â Â U are still in Sebastian, right?
Let me know when I can meet up with u. I appreciate everyone’s quick offer. I am speechless. Â
Rob
Sent from my iPhone
|
|
|
|
--
Phil Yoder phil(at)philyoder.com (phil(at)philyoder.com) \__________o-( )-o__________/ www.itsnotthatcomplex.com
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
85.11 KB |
| Viewed: |
14189 Time(s) |
|
| Description: |
|
| Filesize: |
105.68 KB |
| Viewed: |
14189 Time(s) |
|
|
|
| Back to top |
|
|
phil(at)philyoder.com
Guest
|
| Posted: Sat Sep 28, 2019 12:03 pm Post subject: NavWorx does not report |
|
|
Tim At Approach Fastack can help you. I’m not familiar with the IFD box to know if it has an XM or  ADSB weather receiver built in - but the Navworx does (ADSB). If you are seeing wx on the IFD and turn off the Navworx power does the wx go away?
Phil
On Sat, Sep 28, 2019 at 3:53 PM Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: | Not sure. It has been working fine until a couple of weeks ago. I thought I had disabled NavWorx GPS source and was using IFD540 as GPS Source but studying my wiring diagram from Approach (Fast Stack guys), I cannot tell if there is a  a GPS source wired to NavWorx. I am not sure. But I tried NavWorx GPS and IFD GPS and both failed. The mystery is that I have Nexrad weather which must rely on GPS source?
So far, I have swapped transponders, checked my set up in the IFD and swapped NavWorx, so it must be a wiring issue….I think.
Waiting to call Approach guys on Monday to get some clarifications.
Do not archive.
Rob
| Quote: | On Sep 28, 2019, at 3:26 PM, Joey Ferreyra <joeyferreyra(at)gmail.com (joeyferreyra(at)gmail.com)> wrote:
I wonder if it’s affected with the issues that they were unable to resolve before closing shop?
https://www.aopa.org/news-and-media/all-news/2017/october/20/navworx-calls-it-quits
Joey
On Sat, Sep 28, 2019 at 1:53 PM Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: | Hi jesse,
Just installed your box and the issue remains. NavWorx software sez no GPS position. I guess I might have a bad connection; you agree?
Will FedEX your box on Monday. Thank you again for your help.
Rob Kermanj
772-418-1417
| Quote: | On Sep 20, 2019, at 5:09 PM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
--> RV10-List message posted by: Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)>
I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
|
<IMG_2367.jpeg><IMG_2368.jpeg>
|
|
| Quote: | | Quote: | | Quote: | Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
C: 352-427-0285
F: 815-377-3694
| Quote: | On Sep 20, 2019, at 4:57 PM, Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
--> RV10-List message posted by: Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)>
Thanks Jessie. Â Â U are still in Sebastian, right?
Let me know when I can meet up with u. I appreciate everyone’s quick offer. I am speechless. Â
Rob
Sent from my iPhone
|
|
|
|
|
--
Phil Yoder phil(at)philyoder.com (phil(at)philyoder.com) \__________o-( )-o__________/ www.itsnotthatcomplex.com
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
flysrv10(at)gmail.com
Guest
|
| Posted: Sat Sep 28, 2019 12:08 pm Post subject: NavWorx does not report |
|
|
Avidyne IFD 540 with Advanced Flight Systems 5800. I am not sure if GPS position is passed through AFS or not. From my wiring diagram, it would seems so. But setting up NavWorx to IFD is straight forward. The dropdown menuin NavWorx software even names IFD 540.
I am with you; my wiring from Advance is top notch but I have nothing else to go by. Perhaps how the position info is routed to NavWorx might clear up how to go about trouble shooting.
Do not archive.
Rob Kermanj
| Quote: | On Sep 28, 2019, at 3:51 PM, Phil Yoder <phil(at)philyoder.com (phil(at)philyoder.com)> wrote:
The correct protocol needs to be set on both your gps and the Navworx box. Wiring is the last thing I’d suspect if it was working prior. The issues Navworx has never had to do with communications between the gps and their box to my knowledge - but getting it set up properly took done work.
What gps are you using?
Phil Yoder.
On Sat, Sep 28, 2019 at 3:36 PM Joey Ferreyra <joeyferreyra(at)gmail.com (joeyferreyra(at)gmail.com)> wrote:
| Quote: | I wonder if it’s affected with the issues that they were unable to resolve before closing shop?
https://www.aopa.org/news-and-media/all-news/2017/october/20/navworx-calls-it-quits
Joey
On Sat, Sep 28, 2019 at 1:53 PM Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: | Hi jesse,
Just installed your box and the issue remains. NavWorx software sez no GPS position. I guess I might have a bad connection; you agree?
Will FedEX your box on Monday. Thank you again for your help.
Rob Kermanj772-418-1417
| Quote: | On Sep 20, 2019, at 5:09 PM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
--> RV10-List message posted by: Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)>I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
|
<IMG_2367.jpeg><IMG_2368.jpeg>
|
|
-- Phil Yoder phil(at)philyoder.com (phil(at)philyoder.com) \__________o-( )-o__________/ www.itsnotthatcomplex.com
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
flysrv10(at)gmail.com
Guest
|
| Posted: Sat Sep 28, 2019 12:11 pm Post subject: NavWorx does not report |
|
|
IFD is a slide-in replacement for Garmin 530. All pins assignment are the same. No XM or ADSB.
I see the weather on my AFS and yes, pulling the CB turns off the weather.
Do not archive
Rob Kermanj
| Quote: | On Sep 28, 2019, at 4:01 PM, Phil Yoder <phil(at)philyoder.com (phil(at)philyoder.com)> wrote:
Tim At Approach Fastack can help you. I’m not familiar with the IFD box to know if it has an XM or ADSB weather receiver built in - but the Navworx does (ADSB). If you are seeing wx on the IFD and turn off the Navworx power does the wx go away?
Phil
On Sat, Sep 28, 2019 at 3:53 PM Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: | Not sure. It has been working fine until a couple of weeks ago. I thought I had disabled NavWorx GPS source and was using IFD540 as GPS Source but studying my wiring diagram from Approach (Fast Stack guys), I cannot tell if there is a a GPS source wired to NavWorx. I am not sure. But I tried NavWorx GPS and IFD GPS and both failed. The mystery is that I have Nexrad weather which must rely on GPS source?
So far, I have swapped transponders, checked my set up in the IFD and swapped NavWorx, so it must be a wiring issue….I think.
Waiting to call Approach guys on Monday to get some clarifications.
Do not archive.
Rob
| Quote: | On Sep 28, 2019, at 3:26 PM, Joey Ferreyra <joeyferreyra(at)gmail.com (joeyferreyra(at)gmail.com)> wrote:
I wonder if it’s affected with the issues that they were unable to resolve before closing shop?
https://www.aopa.org/news-and-media/all-news/2017/october/20/navworx-calls-it-quits
Joey
On Sat, Sep 28, 2019 at 1:53 PM Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: | Hi jesse,
Just installed your box and the issue remains. NavWorx software sez no GPS position. I guess I might have a bad connection; you agree?
Will FedEX your box on Monday. Thank you again for your help.
Rob Kermanj772-418-1417
| Quote: | On Sep 20, 2019, at 5:09 PM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
--> RV10-List message posted by: Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)>I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
|
<IMG_2367.jpeg><IMG_2368.jpeg>
|
|
|
-- Phil Yoder phil(at)philyoder.com (phil(at)philyoder.com) \__________o-( )-o__________/ www.itsnotthatcomplex.com
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
phil(at)philyoder.com
Guest
|
| Posted: Sat Sep 28, 2019 12:19 pm Post subject: NavWorx does not report |
|
|
I would try all of the available gps ‘input’ protocol options - Navworx
didn’t do a very good job labeling them.
On Sat, Sep 28, 2019 at 4:13 PM Rob Kermanj <flysrv10(at)gmail.com> wrote:
[quote] Avidyne IFD 540 with Advanced Flight Systems 5800. I am not sure if GPS
position is passed through AFS or not. From my wiring diagram, it would
seems so. But setting up NavWorx to IFD is straight forward. The dropdown
menuin NavWorx software even names IFD 540.
I am with you; my wiring from Advance is top notch but I have nothing else
to go by. Perhaps how the position info is routed to NavWorx might clear
up how to go about trouble shooting.
Do not archive.
Rob Kermanj
On Sep 28, 2019, at 3:51 PM, Phil Yoder <phil(at)philyoder.com> wrote:
The correct protocol needs to be set on both your gps and the Navworx
box. Wiring is the last thing I’d suspect if it was working prior. The
issues Navworx has never had to do with communications between the gps and
their box to my knowledge - but getting it set up properly took done work
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jesse(at)saintaviation.co
Guest
|
| Posted: Sat Sep 28, 2019 12:22 pm Post subject: NavWorx does not report |
|
|
I agree.
Jesse Saint
Saint Aviation, Inc.
352-427-0285
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
Sent from my iPad
On Sep 28, 2019, at 2:46 PM, Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: | Hi jesse,
Just installed your box and the issue remains. NavWorx software sez no GPS position. I guess I might have a bad connection; you agree?
Will FedEX your box on Monday. Thank you again for your help.
Rob Kermanj772-418-1417
| Quote: | On Sep 20, 2019, at 5:09 PM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
--> RV10-List message posted by: Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)>I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
|
<IMG_2367.jpeg><IMG_2368.jpeg>
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rleffler
Joined: 05 Nov 2006
Posts: 680
|
| Posted: Sat Sep 28, 2019 12:23 pm Post subject: NavWorx does not report |
|
|
No, it doesn’t go through the AFS for the ADSB function. It needs a dedicated serial out from your IFD. It needs to be set for the correct baud rate and ADSB+. The most common mistake is using ADSB instead of ADSB+ on the Garmin navigators. I do not know if IFD has the same options.
The schematics are well documented in the Navworx manual.
Have you complied with the AMOC yet?
From: owner-rv10-list-server(at)matronics.com <owner-rv10-list-server(at)matronics.com> On Behalf Of Rob Kermanj
Sent: Saturday, September 28, 2019 4:06 PM
To: rv10-list(at)matronics.com
Subject: Re: RV10-List: NavWorx does not report
Avidyne IFD 540 with Advanced Flight Systems 5800. I am not sure if GPS position is passed through AFS or not. From my wiring diagram, it would seems so. But setting up NavWorx to IFD is straight forward. The dropdown menuin NavWorx software even names IFD 540.
I am with you; my wiring from Advance is top notch but I have nothing else to go by. Perhaps how the position info is routed to NavWorx might clear up how to go about trouble shooting.
Do not archive.
Rob Kermanj
| Quote: |
On Sep 28, 2019, at 3:51 PM, Phil Yoder <phil(at)philyoder.com (phil(at)philyoder.com)> wrote:
The correct protocol needs to be set on both your gps and the Navworx box. Wiring is the last thing I’d suspect if it was working prior. The issues Navworx has never had to do with communications between the gps and their box to my knowledge - but getting it set up properly took done work.
What gps are you using?
Phil Yoder.
On Sat, Sep 28, 2019 at 3:36 PM Joey Ferreyra <joeyferreyra(at)gmail.com (joeyferreyra(at)gmail.com)> wrote:
| Quote: |
I wonder if it’s affected with the issues that they were unable to resolve before closing shop?
https://www.aopa.org/news-and-media/all-news/2017/october/20/navworx-calls-it-quits
Joey
On Sat, Sep 28, 2019 at 1:53 PM Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: |
Hi jesse,
Just installed your box and the issue remains. NavWorx software sez no GPS position. I guess I might have a bad connection; you agree?
Will FedEX your box on Monday. Thank you again for your help.
Rob Kermanj
772-418-1417
| Quote: |
On Sep 20, 2019, at 5:09 PM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
--> RV10-List message posted by: Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)>
I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
|
<IMG_2367.jpeg><IMG_2368.jpeg>
| Quote: |
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
C: 352-427-0285
F: 815-377-3694
| Quote: |
On Sep 20, 2019, at 4:57 PM, Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
--> RV10-List message posted by: Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)>
Thanks Jessie. U are still in Sebastian, right?
Let me know when I can meet up with u. I appreciate everyone’s quick offer. I am speechless.
Rob
Sent from my iPhone
|
|
|
|
--
Phil Yoder phil(at)philyoder.com (phil(at)philyoder.com) \__________o-( )-o__________/ www.itsnotthatcomplex.com
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler |
|
| Back to top |
|
|
flysrv10(at)gmail.com
Guest
|
| Posted: Sat Sep 28, 2019 12:39 pm Post subject: NavWorx does not report |
|
|
Hmmm. Thank you guys. I will try that and report back. Rob Kermanj
| Quote: | On Sep 28, 2019, at 4:17 PM, Phil Yoder <phil(at)philyoder.com (phil(at)philyoder.com)> wrote:
I would try all of the available gps ‘input’ protocol options - Navworx didn’t do a very good job labeling them.
On Sat, Sep 28, 2019 at 4:13 PM Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: | Avidyne IFD 540 with Advanced Flight Systems 5800. I am not sure if GPS position is passed through AFS or not. From my wiring diagram, it would seems so. But setting up NavWorx to IFD is straight forward. The dropdown menuin NavWorx software even names IFD 540.
I am with you; my wiring from Advance is top notch but I have nothing else to go by. Perhaps how the position info is routed to NavWorx might clear up how to go about trouble shooting.
Do not archive.
Rob Kermanj
| Quote: | On Sep 28, 2019, at 3:51 PM, Phil Yoder <phil(at)philyoder.com (phil(at)philyoder.com)> wrote:
The correct protocol needs to be set on both your gps and the Navworx box. Wiring is the last thing I’d suspect if it was working prior. The issues Navworx has never had to do with communications between the gps and their box to my knowledge - but getting it set up properly took done work.
What gps are you using?
Phil Yoder.
|
|
-- Phil Yoder phil(at)philyoder.com (phil(at)philyoder.com) \__________o-( )-o__________/ www.itsnotthatcomplex.com
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
flysrv10(at)gmail.com
Guest
|
| Posted: Sat Sep 28, 2019 12:46 pm Post subject: NavWorx does not report |
|
|
Yes Bob. I complied with AMOC.
So I must double check my wiring with the installation manual on NavWorx.
Thanks.
Do not archive.
Rob Kermanj
| Quote: | On Sep 28, 2019, at 4:21 PM, Bob Leffler <bob(at)thelefflers.com (bob(at)thelefflers.com)> wrote:
No, it doesn’t go through the AFS for the ADSB function. It needs a dedicated serial out from your IFD. It needs to be set for the correct baud rate and ADSB+. The most common mistake is using ADSB instead of ADSB+ on the Garmin navigators. I do not know if IFD has the same options.
The schematics are well documented in the Navworx manual.
Have you complied with the AMOC yet?
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) <owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)> On Behalf Of Rob KermanjSent: Saturday, September 28, 2019 4:06 PMTo: rv10-list(at)matronics.com (rv10-list(at)matronics.com)Subject: Re: NavWorx does not report
Avidyne IFD 540 with Advanced Flight Systems 5800. I am not sure if GPS position is passed through AFS or not. From my wiring diagram, it would seems so. But setting up NavWorx to IFD is straight forward. The dropdown menuin NavWorx software even names IFD 540.
I am with you; my wiring from Advance is top notch but I have nothing else to go by. Perhaps how the position info is routed to NavWorx might clear up how to go about trouble shooting.
Do not archive.
Rob Kermanj
| Quote: | On Sep 28, 2019, at 3:51 PM, Phil Yoder <phil(at)philyoder.com (phil(at)philyoder.com)> wrote:
The correct protocol needs to be set on both your gps and the Navworx box. Wiring is the last thing I’d suspect if it was working prior. The issues Navworx has never had to do with communications between the gps and their box to my knowledge - but getting it set up properly took done work.
What gps are you using?
Phil Yoder.
On Sat, Sep 28, 2019 at 3:36 PM Joey Ferreyra <joeyferreyra(at)gmail.com (joeyferreyra(at)gmail.com)> wrote:
| Quote: | I wonder if it’s affected with the issues that they were unable to resolve before closing shop?
https://www.aopa.org/news-and-media/all-news/2017/october/20/navworx-calls-it-quits
Joey
On Sat, Sep 28, 2019 at 1:53 PM Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: | Hi jesse,
Just installed your box and the issue remains. NavWorx software sez no GPS position. I guess I might have a bad connection; you agree?
Will FedEX your box on Monday. Thank you again for your help.
Rob Kermanj772-418-1417
| Quote: | On Sep 20, 2019, at 5:09 PM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
--> RV10-List message posted by: Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)>I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
|
<IMG_2367.jpeg><IMG_2368.jpeg>
|
|
--
Phil Yoder phil(at)philyoder.com (phil(at)philyoder.com) \__________o-( )-o__________/ www.itsnotthatcomplex.com
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
flysrv10(at)gmail.com
Guest
|
| Posted: Sat Sep 28, 2019 12:52 pm Post subject: NavWorx does not report |
|
|
Bob, Checking the Installation manual, it looks like pin 34 is GPS position source RX. Are you able to verify that?
If so, I need to trace that pin back to IFD.
Do not archive.
Rob Kermanj
| Quote: | On Sep 28, 2019, at 4:21 PM, Bob Leffler <bob(at)thelefflers.com (bob(at)thelefflers.com)> wrote:
No, it doesn’t go through the AFS for the ADSB function. It needs a dedicated serial out from your IFD. It needs to be set for the correct baud rate and ADSB+. The most common mistake is using ADSB instead of ADSB+ on the Garmin navigators. I do not know if IFD has the same options.
The schematics are well documented in the Navworx manual.
Have you complied with the AMOC yet?
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) <owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)> On Behalf Of Rob KermanjSent: Saturday, September 28, 2019 4:06 PMTo: rv10-list(at)matronics.com (rv10-list(at)matronics.com)Subject: Re: NavWorx does not report
Avidyne IFD 540 with Advanced Flight Systems 5800. I am not sure if GPS position is passed through AFS or not. From my wiring diagram, it would seems so. But setting up NavWorx to IFD is straight forward. The dropdown menuin NavWorx software even names IFD 540.
I am with you; my wiring from Advance is top notch but I have nothing else to go by. Perhaps how the position info is routed to NavWorx might clear up how to go about trouble shooting.
Do not archive.
Rob Kermanj
| Quote: | On Sep 28, 2019, at 3:51 PM, Phil Yoder <phil(at)philyoder.com (phil(at)philyoder.com)> wrote:
The correct protocol needs to be set on both your gps and the Navworx box. Wiring is the last thing I’d suspect if it was working prior. The issues Navworx has never had to do with communications between the gps and their box to my knowledge - but getting it set up properly took done work.
What gps are you using?
Phil Yoder.
On Sat, Sep 28, 2019 at 3:36 PM Joey Ferreyra <joeyferreyra(at)gmail.com (joeyferreyra(at)gmail.com)> wrote:
| Quote: | I wonder if it’s affected with the issues that they were unable to resolve before closing shop?
https://www.aopa.org/news-and-media/all-news/2017/october/20/navworx-calls-it-quits
Joey
On Sat, Sep 28, 2019 at 1:53 PM Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: | Hi jesse,
Just installed your box and the issue remains. NavWorx software sez no GPS position. I guess I might have a bad connection; you agree?
Will FedEX your box on Monday. Thank you again for your help.
Rob Kermanj772-418-1417
| Quote: | On Sep 20, 2019, at 5:09 PM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
--> RV10-List message posted by: Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)>I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
|
<IMG_2367.jpeg><IMG_2368.jpeg>
|
|
--
Phil Yoder phil(at)philyoder.com (phil(at)philyoder.com) \__________o-( )-o__________/ www.itsnotthatcomplex.com
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rleffler
Joined: 05 Nov 2006
Posts: 680
|
| Posted: Sat Sep 28, 2019 1:21 pm Post subject: NavWorx does not report |
|
|
I believe so, but to be honest, I sold my box shortly after I got the AMOC approved through the FAA. It’s amazing how quickly you forget things that were once committed to memory. I went to look for the docs I submited to the FAA, but I couldn’t quickly find them.
From: owner-rv10-list-server(at)matronics.com <owner-rv10-list-server(at)matronics.com> On Behalf Of Rob Kermanj
Sent: Saturday, September 28, 2019 4:51 PM
To: rv10-list(at)matronics.com
Subject: Re: RV10-List: NavWorx does not report
Bob, Checking the Installation manual, it looks like pin 34 is GPS position source RX. Are you able to verify that?
If so, I need to trace that pin back to IFD.
Do not archive.
Rob Kermanj
| Quote: |
On Sep 28, 2019, at 4:21 PM, Bob Leffler <bob(at)thelefflers.com (bob(at)thelefflers.com)> wrote:
No, it doesn’t go through the AFS for the ADSB function. It needs a dedicated serial out from your IFD. It needs to be set for the correct baud rate and ADSB+. The most common mistake is using ADSB instead of ADSB+ on the Garmin navigators. I do not know if IFD has the same options.
The schematics are well documented in the Navworx manual.
Have you complied with the AMOC yet?
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) <owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)> On Behalf Of Rob Kermanj
Sent: Saturday, September 28, 2019 4:06 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: RV10-List: NavWorx does not report
Avidyne IFD 540 with Advanced Flight Systems 5800. I am not sure if GPS position is passed through AFS or not. From my wiring diagram, it would seems so. But setting up NavWorx to IFD is straight forward. The dropdown menuin NavWorx software even names IFD 540.
I am with you; my wiring from Advance is top notch but I have nothing else to go by. Perhaps how the position info is routed to NavWorx might clear up how to go about trouble shooting.
Do not archive.
Rob Kermanj
| Quote: |
On Sep 28, 2019, at 3:51 PM, Phil Yoder <phil(at)philyoder.com (phil(at)philyoder.com)> wrote:
The correct protocol needs to be set on both your gps and the Navworx box. Wiring is the last thing I’d suspect if it was working prior. The issues Navworx has never had to do with communications between the gps and their box to my knowledge - but getting it set up properly took done work.
What gps are you using?
Phil Yoder.
On Sat, Sep 28, 2019 at 3:36 PM Joey Ferreyra <joeyferreyra(at)gmail.com (joeyferreyra(at)gmail.com)> wrote:
| Quote: |
I wonder if it’s affected with the issues that they were unable to resolve before closing shop?
https://www.aopa.org/news-and-media/all-news/2017/october/20/navworx-calls-it-quits
Joey
On Sat, Sep 28, 2019 at 1:53 PM Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
| Quote: |
Hi jesse,
Just installed your box and the issue remains. NavWorx software sez no GPS position. I guess I might have a bad connection; you agree?
Will FedEX your box on Monday. Thank you again for your help.
Rob Kermanj
772-418-1417
| Quote: |
On Sep 20, 2019, at 5:09 PM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
--> RV10-List message posted by: Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)>
I am in Marion County (X35). I have a couple of them on the shelf that you can test with.
|
<IMG_2367.jpeg><IMG_2368.jpeg>
| Quote: |
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
C: 352-427-0285
F: 815-377-3694
| Quote: |
On Sep 20, 2019, at 4:57 PM, Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
--> RV10-List message posted by: Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)>
Thanks Jessie. U are still in Sebastian, right?
Let me know when I can meet up with u. I appreciate everyone’s quick offer. I am speechless.
Rob
Sent from my iPhone
|
|
|
|
--
Phil Yoder phil(at)philyoder.com (phil(at)philyoder.com) \__________o-( )-o__________/ www.itsnotthatcomplex.com
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler |
|
| Back to top |
|
|
phil(at)philyoder.com
Guest
|
| Posted: Sat Sep 28, 2019 1:39 pm Post subject: NavWorx does not report |
|
|
Looks like pins 9&28 are my 429 lines into the navworx. Let me look for my
navworx manual and I’ll send it.
Phil
On Sat, Sep 28, 2019 at 5:28 PM Bob Leffler <bob(at)thelefflers.com> wrote:
[quote]
I believe so, but to be honest, I sold my box shortly after I got the AMOC
approved through the FAA. It’s amazing how quickly you forget things that
were once committed to memory. I went to look for the docs I submited to
the FAA, but I couldn’t quickly find them.
*From:* owner-rv10-list-server(at)matronics.com <
owner-rv10-list-server(at)matronics.com> *On Behalf Of *Rob Kermanj
*Sent:* Saturday, September 28, 2019 4:51 PM
*To:* rv10-list(at)matronics.com
*Subject:* Re: NavWorx does not report
Bob, Checking the Installation manual, it looks like pin 34 is GPS
position source RX. Are you able to verify that?
If so, I need to trace that pin back to IFD.
Do not archive.
Rob Kermanj
On Sep 28, 2019, at 4:21 PM, Bob Leffler <bob(at)thelefflers.com> wrote:
No, it doesn’t go through the AFS for the ADSB function. It needs a
dedicated serial out from your IFD. It needs to be set for the correct
baud rate and ADSB+. The most common mistake is using ADSB instead of
ADSB+ on the Garmin navigators. I do not know if IFD has the same options.
The schematics are well documented in the Navworx manual.
Have you complied with the AMOC yet?
*From:* owner-rv10-list-server(at)matronics.com <
owner-rv10-list-server(at)matronics.com> *On Behalf Of *Rob Kermanj
*Sent:* Saturday, September 28, 2019 4:06 PM
*To:* rv10-list(at)matronics.com
*Subject:* Re: NavWorx does not report
Avidyne IFD 540 with Advanced Flight Systems 5800. I am not sure if GPS
position is passed through AFS or not. From my wiring diagram, it would
seems so. But setting up NavWorx to IFD is straight forward. The dropdown
menuin NavWorx software even names IFD 540.
I am with you; my wiring from Advance is top notch but I have nothing else
to go by. Perhaps how the position info is routed to NavWorx might clear
up how to go about trouble shooting.
Do not archive.
Rob Kermanj
On Sep 28, 2019, at 3:51 PM, Phil Yoder <phil(at)philyoder.com> wrote:
The correct protocol needs to be set on both your gps and the Navworx
box. Wiring is the last thing I’d suspect if it was working prior. The
issues Navworx has never had to do with communications between the gps and
their box to my knowledge - but getting it set up properly took done work
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
