Matronics Email Lists :: View topic - Oil Catch Can for 914

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Oil Catch Can for 914

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

rparigoris

Joined: 24 Nov 2009
Posts: 796

Posted: Wed Oct 30, 2019 10:40 pm Post subject: Oil Catch Can for 914

Hi Group



What's opinions if a XS Monowheel with 914 and Airmaster Prop needs an oil catch can?



If the answer is yes, any pictures by chance or description of details? 

Thx. Ron P.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

rlborger(at)mac.com
Guest

Posted: Thu Oct 31, 2019 3:41 am Post subject: Oil Catch Can for 914

Ron,



Not sure what you mean by an “oil catch can.”



But I doubt a 914 sure needs one.  Mine doesn’t.  



Blue skies & tailwinds,

Bob Borger

Europa XS Tri, Rotax 914, Airmaster C/S Prop (130 hrs).

Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP, Hercules Prop. (.75 hr)

3705 Lynchburg Dr.

Corinth, TX  76208-5331

Cel: 817-992-1117

rlborger(at)mac.com



 	  Quote: 	
		   On Oct 31, 2019, at 1:40 AM, rparigoris <rparigor(at)hotmail.com> wrote:

 

 

 

 Hi Group

 

 What's opinions if a XS Monowheel with 914 and Airmaster Prop needs an oil catch can?

 

 If the answer is yes, any pictures by chance or description of details? 

 Thx. Ron P.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=492048#492048

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

rparigoris

Joined: 24 Nov 2009
Posts: 796

Posted: Thu Oct 31, 2019 9:49 am Post subject: Re: Oil Catch Can for 914

Hi Bob



I'm installing my oil tank. Here's what the manual says about venting the tank:

The vent from the oil tank allows an oil mist to escape to atmosphere. It is not unusual to run the vent line to the bottom of the cowling, however if you do this, don’t position the end of the tube such that i twill be in the airstream whilst flying. This could cause low pressure at the end of the tube to suck more oil from the tank than it should.Another consideration is that the oil mist will tend to coat the fuselage if left to vent freely. To avoid this you can run the vent line into a collector bottle before it goes to atmosphere;  however, no bottle is provided.



Europa is calling it a collector bottle.

Ron P.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

europa10(at)bellsouth.net
Guest

Posted: Thu Oct 31, 2019 10:16 am Post subject: Oil Catch Can for 914

Here's what I used.  A little over 10 bucks on Ebay.



https://www.ebay.com/itm/Engine-Oil-Separator-Catch-Can-Reservoir-Tank-Breather-Filter-Baffled-PCV-Valve/153337954937

Bill

N51EU

Classic Monowheel

--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

ptag.dev(at)talktalk.net
Guest

Posted: Thu Oct 31, 2019 11:26 am Post subject: Oil Catch Can for 914

Hi! All,

I let the vent pipe 1/8th diameter exit into the aft of the lower cowl which never caused a problem on the 914 of G-PTAG as it only amounted to not much more than an occasional drop. I guess that fixing a mini pill bottle filled with wire wool may have collected the oil better but even that would be overkill !

Regards 

Bob Harrison .



--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

SPURPURA

Joined: 04 Apr 2015
Posts: 68
Location: KAPV

Posted: Thu Oct 31, 2019 1:04 pm Post subject: Re: Oil Catch Can for 914

If you’re losing enough oil to catch your probably overfilling the tank. When the tank is overfilled it will just blow out the excess.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
N951EU - Tri-gear & 912ULS, N77EU- Mono & 914
I'D RATHER HAVE A BOTTLE IN FRONT OF ME THAN A FRONTAL LABOTAMY.

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum