Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

David Clark Stereo wiring

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
John M Tipton



Joined: 07 Aug 2018
Posts: 45
Location: Devon - England

PostPosted: Tue Jan 14, 2020 8:11 am    Post subject: David Clark Stereo wiring Reply with quote

Hi Guys

Where can I find the wiring diagram for a DC stereo headset, the small dia. plug has tip, two rings and the barrel, I have the corresponding panel socket (three contacts plus barrel, I need schematic for the socket wiring.

John


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
nuckolls.bob(at)aeroelect
Guest





PostPosted: Tue Jan 14, 2020 8:42 am    Post subject: David Clark Stereo wiring Reply with quote

At 10:11 AM 1/14/2020, you wrote:
Quote:
--> AeroElectric-List message posted by: "John M Tipton" <johntiptonuk(at)hotmail.com>

Hi Guys

Where can I find the wiring diagram for a DC stereo headset, the small dia. plug has tip, two rings and the barrel, I have the corresponding panel socket (three contacts plus barrel, I need schematic for the socket wiring.

John


What is the model number of the headset?


Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Eric Page



Joined: 15 Feb 2017
Posts: 245

PostPosted: Tue Jan 14, 2020 9:08 am    Post subject: David Clark Stereo wiring Reply with quote

See:
http://www.aeroelectric.com/articles/micjack/micjack.html

On Jan 14, 2020, at 8:11 AM, John M Tipton <johntiptonuk(at)hotmail.com (johntiptonuk(at)hotmail.com)> wrote:

Quote:

Hi Guys

Where can I find the wiring diagram for a DC stereo headset, the small dia. plug has tip, two rings and the barrel, I have the corresponding panel socket (three contacts plus barrel, I need schematic for the socket wiring.

John



- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
john(at)tipton.me.uk
Guest





PostPosted: Tue Jan 14, 2020 9:13 am    Post subject: David Clark Stereo wiring Reply with quote

H10-13.4 & H10-13X, the radio/com is a Trig TY96

John

Sent from my iPad

----x--O--x----
Quote:
On 14 Jan 2020, at 4:57 pm, Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com> wrote:

 At 10:11 AM 1/14/2020, you wrote:
Quote:
--> AeroElectric-List message posted by: "John M Tipton" <johntiptonuk(at)hotmail.com>

Hi Guys

Where can I find the wiring diagram for a DC stereo headset, the small dia. plug has tip, two rings and the barrel, I have the corresponding panel socket (three contacts plus barrel, I need schematic for the socket wiring.

John


What is the model number of the headset?


Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
john(at)tipton.me.uk
Guest





PostPosted: Tue Jan 14, 2020 10:34 am    Post subject: David Clark Stereo wiring Reply with quote

Unless I’m missing something Eric, that circuit is relating to a ‘Mike’ and PTT circuit, nothing to do with a stereo headphone.

John

Sent from my iPad

----x--O--x----
Quote:
On 14 Jan 2020, at 5:22 pm, Eric Page <edpav8r(at)yahoo.com> wrote:


See:
http://www.aeroelectric.com/articles/micjack/micjack.html

On Jan 14, 2020, at 8:11 AM, John M Tipton <johntiptonuk(at)hotmail.com (johntiptonuk(at)hotmail.com)> wrote:

Quote:

Hi Guys

Where can I find the wiring diagram for a DC stereo headset, the small dia. plug has tip, two rings and the barrel, I have the corresponding panel socket (three contacts plus barrel, I need schematic for the socket wiring.

John




- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
John M Tipton



Joined: 07 Aug 2018
Posts: 45
Location: Devon - England

PostPosted: Tue Jan 14, 2020 11:09 am    Post subject: Re: David Clark Stereo wiring Reply with quote

Sorry guys,

I've got this completely wrong way round on the Mike/Headphone situation: so Question, how do I wire up the 1/4" plug for stereo

John


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
ceengland7(at)gmail.com
Guest





PostPosted: Tue Jan 14, 2020 11:32 am    Post subject: David Clark Stereo wiring Reply with quote

On 1/14/2020 1:09 PM, John M Tipton wrote:

Quote:
Quote:
--> AeroElectric-List message posted by: "John M Tipton" <johntiptonuk(at)hotmail.com> (johntiptonuk(at)hotmail.com)

Sorry guys,

I've got this completely wrong way round on the Mike/Headphone situation: so Question, how do I wire up the 1/4" plug for stereo

John


Above is standard stereo wiring for a 1/4" phone plug.
Wiring terminals on the mating jack is kinda tricky to describe, but not complicated. For a novice, the easiest way to ID the terminals is to insert a stereo plug (see above) into the jack, and use an ohm meter to ID continuity from each terminal on the plug, to each terminal on the jack.

Charlie


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Eric Page



Joined: 15 Feb 2017
Posts: 245

PostPosted: Tue Jan 14, 2020 12:01 pm    Post subject: David Clark Stereo wiring Reply with quote

Sorry about that, John.  When you wrote "small diameter plug" and "two rings," I thought you were talking about the mic plug. The industry standard mic plug is a 4-conductor TRRS plug of 0.206" diameter (p/n PJ-068), while the headphone is a 3-conductor TRS plug of 0.25" diameter (p/n PJ-055).
According to their data sheets...
http://www.davidclarkcompany.com/files/literature/10-13.4.pdf

and
http://www.davidclarkcompany.com/files/literature/H10-13X.pdf

...both of your headsets use the standard 1/4" PJ-055 stereo headphone plug. As for which contact is left and which is right, perhaps Bob knows the standard in aviation. Internet searching produces plenty of images, some showing tip=left and ring=right, others showing the opposite. The only consistent feature is ground=sleeve.
A quick experiment will quickly reveal which way your headsets are wired.  With the headset over your ears, hold the negative side of a 1.5V battery (coin, AA, AAA) to the sleeve and use a wire connected to the positive side to alternately tap the tip and ring of the headset's plug. You'll know from the static which contact is which. Using this test, my Clarity Aloft is wired tip=left and ring=right.
Eric



On Tuesday, January 14, 2020, 10:53:34 AM PST, John M Tipton <john(at)tipton.me.uk> wrote:


Unless I’m missing something Eric, that circuit is relating to a ‘Mike’ and PTT circuit, nothing to do with a stereo headphone.
John


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
john(at)tipton.me.uk
Guest





PostPosted: Tue Jan 14, 2020 1:10 pm    Post subject: David Clark Stereo wiring Reply with quote

Thank you, that clarifies it

John

Sent from my iPad

  ----x--O--x----
Quote:
On 14 Jan 2020, at 8:16 pm, Eric Page <edpav8r(at)yahoo.com> wrote:


Sorry about that, John. When you wrote "small diameter plug" and "two rings," I thought you were talking about the mic plug. The industry standard mic plug is a 4-conductor TRRS plug of 0.206" diameter (p/n PJ-068), while the headphone is a 3-conductor TRS plug of 0.25" diameter (p/n PJ-055).
According to their data sheets...
http://www.davidclarkcompany.com/files/literature/10-13.4.pdf

and
http://www.davidclarkcompany.com/files/literature/H10-13X.pdf

...both of your headsets use the standard 1/4" PJ-055 stereo headphone plug. As for which contact is left and which is right, perhaps Bob knows the standard in aviation. Internet searching produces plenty of images, some showing tip=left and ring=right, others showing the opposite. The only consistent feature is ground=sleeve.
A quick experiment will quickly reveal which way your headsets are wired. With the headset over your ears, hold the negative side of a 1.5V battery (coin, AA, AAA) to the sleeve and use a wire connected to the positive side to alternately tap the tip and ring of the headset's plug. You'll know from the static which contact is which. Using this test, my Clarity Aloft is wired tip=left and ring=right.
Eric



On Tuesday, January 14, 2020, 10:53:34 AM PST, John M Tipton <john(at)tipton.me.uk> wrote:


Unless I’m missing something Eric, that circuit is relating to a ‘Mike’ and PTT circuit, nothing to do with a stereo headphone.
John






- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Whiteleg
Guest





PostPosted: Wed Feb 19, 2020 4:12 am    Post subject: Re: David Clark Stereo wiring Reply with quote

ceengland7(at)gmail.com wrote:
On 1/14/2020 1:09 PM, John M Tipton wrote:

Quote:
Quote:
--> AeroElectric-List message posted by: "John M Tipton" <johntiptonuk> (johntiptonuk(at)hotmail.com)

Sorry guys,

I've got this completely wrong way round on the Mike/Headphone situation: so Question, how do I wire up the 1/4" plug for stereo

John


Above is standard stereo wiring for a 1/4" phone plug.
Wiring terminals on the mating jack is kinda tricky to describe, but not complicated. For a novice, the easiest way to ID the terminals is to insert a stereo plug (see above) into the jack, and use an ohm meter to ID continuity from each terminal on the plug, to each terminal on the jack.

Charlie


thank you very much and it helped me a lot!


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group