 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
smedley
Joined: 04 Feb 2020
Posts: 18
Location: Hatfield PA
|
 Posted: Wed Mar 04, 2020 7:32 pm Post subject: Cables |
 |
|
Hello all,I made my first post in a long time a few weeks ago, Here's my second. I'm attaching a photo of my Firestar at a field called Rainbows End in New Jersey in 1987. Lets see if it comes out.
My first question to the group. Back in the 90's there was a guy, ( in Arizona I think) that made up cables. Does anyone know if he's still around ?
Thanks,
Ed Bonsell
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
| Filesize: |
298.96 KB |
| Viewed: |
5086 Time(s) |
|
|
|
| Back to top |
|
 |
williamtsullivan(at)att.n
Guest
|
| Posted: Wed Mar 04, 2020 8:44 pm Post subject: Cables |
|
|
I bought the crimping tool and the parts from Aircraft Spruce and Specialty, and made my own. Very easy. And I had a Firestar exactly like that one, and about the same age.
Bill Sullivan
Tarboro, NC
On Wednesday, March 4, 2020, 10:32:22 PM EST, Edward Bonsell <smedley945(at)gmail.com> wrote:
Hello all,I made my first post in a long time a few weeks ago, Here's my second. I'm attaching a photo of my Firestar at a field called Rainbows End in New Jersey in 1987. Lets see if it comes out.
My first question to the group. Back in the 90's there was a guy, ( in Arizona I think) that made up cables. Does anyone know if he's still around ?
Thanks,
Ed Bonsell
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
ceengland7(at)gmail.com
Guest
|
| Posted: Thu Mar 05, 2020 7:11 am Post subject: Cables |
|
|
I bought a lever action crimping tool that looks like a bolt cutter from Amazon/ebay (forget which). Only slightly more expensive than the screw action crimper, and *much* faster/easier to use. I bought stainless wire rope in the proper sizes from an online vendor. I copied the old cables by stretching the old ones on a flat surface & driving nails in the thimbles at each end, then copying the length on the new cable. If you have a fairly long table, a nail near one end can serve as the starting point, and a long 1x4 or 2x4 with a nail near one end can be 'telescoped' off the end of the table to stretch out the original cable, then clamped to the table to set the length. Then it's easy to adjust for different length cables.
Charlie
On Wed, Mar 4, 2020 at 10:46 PM william sullivan <williamtsullivan(at)att.net (williamtsullivan(at)att.net)> wrote:
| Quote: | I bought the crimping tool and the parts from Aircraft Spruce and Specialty, and made my own. Very easy. And I had a Firestar exactly like that one, and about the same age.
Bill Sullivan
Tarboro, NC
On Wednesday, March 4, 2020, 10:32:22 PM EST, Edward Bonsell <smedley945(at)gmail.com (smedley945(at)gmail.com)> wrote:
Hello all,I made my first post in a long time a few weeks ago, Here's my second. I'm attaching a photo of my Firestar at a field called Rainbows End in New Jersey in 1987. Lets see if it comes out.
My first question to the group. Back in the 90's there was a guy, ( in Arizona I think) that made up cables. Does anyone know if he's still around ?
Thanks,
Ed Bonsell
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
rickofudall
Joined: 19 Sep 2009
Posts: 1392
Location: Udall, KS, USA
|
| Posted: Thu Mar 05, 2020 2:36 pm Post subject: Cables |
|
|
Charlie, I used a couple of straight 2 X 6's and hinged them so they'd fit in my hangar when not in use. I have one crimping tool I bought in 1974 that does 3/32 and 1/16 and then I bought the CGMP tool so I could do 1/8 and 5/32, too. Pricey but they last.
Rick
PS bought a couple of checking gages, too so I'd know the were crimped right. Found that the 5/32 jaw on the CGMP tool made really good battery cables too.
On Thu, Mar 5, 2020 at 9:14 AM Charlie England <ceengland7(at)gmail.com (ceengland7(at)gmail.com)> wrote:
| Quote: | I bought a lever action crimping tool that looks like a bolt cutter from Amazon/ebay (forget which). Only slightly more expensive than the screw action crimper, and *much* faster/easier to use. I bought stainless wire rope in the proper sizes from an online vendor. I copied the old cables by stretching the old ones on a flat surface & driving nails in the thimbles at each end, then copying the length on the new cable. If you have a fairly long table, a nail near one end can serve as the starting point, and a long 1x4 or 2x4 with a nail near one end can be 'telescoped' off the end of the table to stretch out the original cable, then clamped to the table to set the length. Then it's easy to adjust for different length cables.
Charlie
On Wed, Mar 4, 2020 at 10:46 PM william sullivan <williamtsullivan(at)att.net (williamtsullivan(at)att.net)> wrote:
| Quote: | I bought the crimping tool and the parts from Aircraft Spruce and Specialty, and made my own. Very easy. And I had a Firestar exactly like that one, and about the same age.
Bill Sullivan
Tarboro, NC
On Wednesday, March 4, 2020, 10:32:22 PM EST, Edward Bonsell <smedley945(at)gmail.com (smedley945(at)gmail.com)> wrote:
Hello all,I made my first post in a long time a few weeks ago, Here's my second. I'm attaching a photo of my Firestar at a field called Rainbows End in New Jersey in 1987. Lets see if it comes out.
My first question to the group. Back in the 90's there was a guy, ( in Arizona I think) that made up cables. Does anyone know if he's still around ?
Thanks,
Ed Bonsell
|
|
--
“Blessed are the cracked, for they shall let in the light.” Groucho Marx
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
The smallest miracle right in front of you is enough to make you happy.... |
|
| Back to top |
|
|
ceengland7(at)gmail.com
Guest
|
| Posted: Thu Mar 05, 2020 3:47 pm Post subject: Cables |
|
|
'Once you go Asian...' 
I bought one brand new for less than $60; it came with a gauge. I checked the swaged sleeves against ones done with my neighbor's screw type Nicopress tool that cost roughly the same amount, and they did exactly the same job, according to the gauge. Looks very similar to this:
https://www.ebay.com/itm/DARE-2154-Splicing-Crimping-Tool-For-Nicopress-Sleeves-Taps-4-Slot/184074983455?epid=671941493&hash=item2adbb9581f%3Am%3AmykE37l7hrwB-G3lR-OZM1g&LH_ItemCondition=3
The one I bought does all sizes up to 1/8", but the vendor had a slightly larger model that would do 3/16 (and maybe 1/4) for about $10 more.
BTW, I had multiple email exchanges with ACS a couple of years ago about their sleeves. At some point in the not-too-distant past, the FAA changed their recommendation on what materials/plating to use on the various wire rope materials (galvanized, stainless, etc), and ACS missed the memo. Might be worth some research before purchasing sleeves from ACS, to be sure they actually updated their info. I ended up finding the right sleeves from another source.
Charlie
On 3/5/2020 4:34 PM, Richard Girard wrote:
| Quote: | Charlie, I used a couple of straight 2 X 6's and hinged them so they'd fit in my hangar when not in use. I have one crimping tool I bought in 1974 that does 3/32 and 1/16 and then I bought the CGMP tool so I could do 1/8 and 5/32, too. Pricey but they last.
Rick
PS bought a couple of checking gages, too so I'd know the were crimped right. Found that the 5/32 jaw on the CGMP tool made really good battery cables too.
On Thu, Mar 5, 2020 at 9:14 AM Charlie England <ceengland7(at)gmail.com (ceengland7(at)gmail.com)> wrote:
| Quote: | I bought a lever action crimping tool that looks like a bolt cutter from Amazon/ebay (forget which). Only slightly more expensive than the screw action crimper, and *much* faster/easier to use. I bought stainless wire rope in the proper sizes from an online vendor. I copied the old cables by stretching the old ones on a flat surface & driving nails in the thimbles at each end, then copying the length on the new cable. If you have a fairly long table, a nail near one end can serve as the starting point, and a long 1x4 or 2x4 with a nail near one end can be 'telescoped' off the end of the table to stretch out the original cable, then clamped to the table to set the length. Then it's easy to adjust for different length cables.
Charlie
On Wed, Mar 4, 2020 at 10:46 PM william sullivan <williamtsullivan(at)att.net (williamtsullivan(at)att.net)> wrote:
| Quote: | I bought the crimping tool and the parts from Aircraft Spruce and Specialty, and made my own. Very easy. And I had a Firestar exactly like that one, and about the same age.
Bill Sullivan
Tarboro, NC
On Wednesday, March 4, 2020, 10:32:22 PM EST, Edward Bonsell <smedley945(at)gmail.com (smedley945(at)gmail.com)> wrote:
Hello all, I made my first post in a long time a few weeks ago, Here's my second. I'm attaching a photo of my Firestar at a field called Rainbows End in New Jersey in 1987. Lets see if it comes out.
My first question to the group. Back in the 90's there was a guy, ( in Arizona I think) that made up cables. Does anyone know if he's still around ?
Thanks,
Ed Bonsell
|
|
--
“Blessed are the cracked, for they shall let in the light.” Groucho Marx
|
This email has been checked for viruses by Avast antivirus software.
www.avast.com [url=#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
