Matronics Email Lists :: View topic - Europa Classic Wing and Fuse Filler.

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Europa Classic Wing and Fuse Filler.

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

tonyrenshaw268(at)gmail.c
Guest

Posted: Thu Apr 09, 2020 9:54 pm Post subject: Europa Classic Wing and Fuse Filler.

Hello all,I’ve been furloughed from my flying job and now have a fair bit of time on my hands to get on with my project. My fuselage is the next major job, to mate the halves, but since I need a small army to help me and we have Covid-19 lockdown restrictions, no friends around, I am looking for other projects. Filling and sanding the wings sounds like a great Covid goal, however I have been advised to start with the tailplanes, a good idea. I do recall though that the fuselage to tailplane moulding is offset somewhat one one side, requiring a buildup and was wondering how other people have addressed this problem? I am then going to launch into the Smooth Prime system I think, just needing to read more on the system but the link below doesn’t lead to their site anymore….I’ll keep trying to find it. Would people recommend SuperFill as the easiest filler to use, or is there other sandable alternatives? 

Thanks.

Regards

Tony Renshaw

[quote]On 22 Feb 2012, at 4:48 am, Steven Pitt <steven.pitt2(at)ntlworld.com (steven.pitt2(at)ntlworld.com)> wrote:

John et al,

I did my trigear in Smooth Prime for all the positives that have already been stated. I then had the aircraft professionally painted (rather than by me) and after 5 years I am still very happy with the results. However one other UK builder has not had such a good result with the same Smooth Prime and same painter although it is being rectified in good order. 

I was always told that damp was the main problem with the Poly Fiber system ie it has to be absolutely dry before top coating and I know that mine went into a newly built oven on a low heat after having 'cured' in my garage for a couple of years after I painted the primer on.

I was interested to hear that the recommendation is now to seal with an epoxy primer and I can see the logic but who does it - the builder or the painter and does the primer also need sanding down.

At the end of the day you pays your money and .......

As I said I was delighted with my aircraft finish and would recommend Smooth Prime again with the caveat.

Regards

Steve Pitt

G-SMDH

Trigear XS 912S

[quote]---

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

budyerly@msn.com

Joined: 05 Oct 2019
Posts: 286
Location: Florida USA

Posted: Sun Apr 12, 2020 12:15 pm Post subject: Re: Europa Classic Wing and Fuse Filler.

Tony,

I was pushed to clean up my body shop composite finishing notes into a .pdf for building techniques.



In a nutshell, UV Smooth Prime is OK for the prep for most but can be a nightmare for the professional painter.  Please go to my techniques section on my website. There I give my three methods we learned and my preferred method of glazing.  It is faster and speeds the process from initial fill to ready for final paint. 



Best Regards,

Bud Yerly

See attached or https://www.customflightcreations.com

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

CFC Finishing of Composite Aircraft.pdf

Description:

Download

Filename:

CFC Finishing of Composite Aircraft.pdf

Filesize:

157.22 KB

Downloaded:

295 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum