limadelta(at)gmail.com Guest
|
Posted: Mon May 25, 2020 11:29 am Post subject: Shelf life of electrical components in humid and dry environ |
|
|
Hi all,
I am completing my Lancair ES, finally! I am finalizing wiring that was planned 15 years ago! I chose Z-14, Bob’s dual electric system, planning two 17 AH batteries in the rear of the airplane, and I acquired all the components years ago. I installed the battery contactors and a ground power contactor in the rear of the airplane and ran all the wiring required from the rear to the front years ago. The components in the airplane sat in a pretty humid environment, and other components said in boxes in a dryer environment. My question is whether I need to worry about shelf life of any of these components. For example, if the contactors test OK, are they good to go, or should I replace them? Generally, what components in Z-14, if any, would be susceptible to degradation from sitting?
Cheers,
Dan
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|