nuckolls.bob(at)aeroelect Guest
|
Posted: Sun Jun 07, 2020 12:33 pm Post subject: Physical construction of Z101 engine bus & battery bus |
|
|
At 11:41 AM 6/7/2020, you wrote:
Quote: | Thanks for the replies. I was not aware of the 9" minimum length on fusible links. Is that somewhere in the Connection? |
not yet but will be called out on Z101's notes . . . and probably
as 6" minimum.
Quote: | Are crimped butt connectors adequate for connecting the fusible link to the protected wire? |
Yes
Quote: | I recently received some of this fusible link wire in both 12 & 14 gauge. Anyone have experience with it? |
Used on millions of cars for decades. Will be
testing here on the bench and recording the
results. Crimped or soldered joints will, I
trust, prove satisfactory. There is nothing
magic about the wire . . . it's the insulation
that makes it special.
Bob . . .
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|