Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

After prop overhaul

Matronics Email Lists Forum Index -> RV8-List

View previous topic :: View next topic

Author Message

jimbean6(at)optimum.net
Guest

Posted: Mon Jun 22, 2020 5:00 pm Post subject: After prop overhaul

I may be repeating knowledge already well known but I didn't know.



After getting my prop back from overhaul by Sensenich I couldn't get the front spinner plate



to align with the spinner. It is attached to the prop dome with 4 capscrews. It seemed that the



dome had to be rotated slightly. The Sensenich rep said no don't do that. The problem



is that the dome is screwed on and torqued and so doesn't return to the same position it



was in when you drilled the holes. He says this is a common problem with some Pipers.



The Sensenich solution is to make the holes in the plate into slots. This is what I did.



Another solution is to just make a new spinner plate. It only means installing 6 nutplates.



cheers Jim

- The Matronics RV8-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV8-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum