![Matronics Email Lists Forum Index](templates/Matronics/images/logo_phpBB.gif) |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
erichdtrombley(at)juno.co Guest
|
Posted: Sat Jul 11, 2020 9:48 am Post subject: Europa MT04 engine mounts |
|
|
Hello,
Can anyone tell me what the uncompressed length/height of a new uninstalled MT04 is? I measured the ones I recently removed and they vary considerably and obviously have taken a set. I suspect they are something close to .970” or 24.6mm.
As noted in a previous email, I switched to Lord J3608-1 mounts. I contacted Lord for the recommended preload, however, they indicated there were too many variable to take into consideration. That said, they provided me with a drawing for the 0-200 motor, which isn’t very helpful, I am afraid. Interestingly, I noted two very distinct differences in the Lord mounts as compared to the MT04s. First is the hardness, the Lord mounts are quite a bit softer. And the second, which surprised me, is the uncompressed length/height which I had incorrectly assumed to be the same the MT04. You know what they say when you assume something. Anyway the Lord mounts are shorter, by how much I can’t say at the moment as I require the uncompressed dimension of the MT04. Armed with this information I should be able to trim the space by the delta, which I am hoping will provide the necessary preload.
Kind regards,
Erich
N28ET Classic Monowheel 914
____________________________________________________________
Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more
Roger Stone Commutation Ups Outrage to Fever Pitch
http://thirdpartyoffers.juno.com/TGL3131/5f09faa73d807aa66ef8st04vuc1
COVID Surge Worries Experts: 'Early Wave of a Lot of Suffering'
http://thirdpartyoffers.juno.com/TGL3131/5f09faa71e7917aa66ef8st04vuc2
Amid Spread of Misinformation, Whispers on FB's Next Move
http://thirdpartyoffers.juno.com/TGL3131/5f09faa73db847aa66ef8st04vuc3
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
erichdtrombley(at)juno.co Guest
|
Posted: Mon Jul 13, 2020 2:09 pm Post subject: Europa MT04 engine mounts |
|
|
Karel,
Thank you for providing the dimensions of the MT04 mounts. This is a big help and I very much appreciated it.
Kind regards,
Erich
N28ET Classic Mono 914
Karel wrote: Erich,The 8 MT04's that I have are between 24.30 mm and 24.90 mm.
____________________________________________________________
Top News - Sponsored By Newser
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|