Matronics Email Lists :: View topic - Europa pitot tube piping and connections

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Europa pitot tube piping and connections

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

kjburns(at)btinternet.com
Guest

Posted: Tue Jan 12, 2021 4:16 pm Post subject: Europa pitot tube piping and connections

Chris, 

Check your static probe under the wing still has the black “plug” in place , can get knocked of easily, result is ineffective asi ... ( you need a pressure differential and this effectively cancels it out ) ..symptom is taxi test that shows extreme asi lag .. 

disconnecting static line restores asi ... ( removes the balancing air stream ) ...



Slight air leaks in asi feed do not create the same ( massive ) effect.



The actual flow when you try to blow through is also relatively high resistance in normal operation .



Regards

Kevin Burns 



Sent from my iPad



 	  Quote: 	
		   On 7 Dec 2020, at 20:36, Chris Callicott <c.callicott1(at)btinternet.com> wrote:

 

 

 

 Evening All, I am preparing a UK built (2007) Europa XS tri-gear which I purchased last year for a permit check flight. The aircraft has not flown for 7 years. I believe I have a leak in the pitot tube system. Pitot and static lines passing through the  fuselage to the instrument panel seem to be made of semi-opaque hard plastic tubing approx 7.5mm OD and use 'push-fit' connectors. An adaptor connects the push-fit connector to standard ?6mm flexible clear tubing to the flight instruments.

 Is this a typical arrangement in Europas and where would I source the larger tubing and push-fit connectors? Many thanks, Chris

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=499625#499625

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

kjburns(at)btinternet.com
Guest

Posted: Tue Jan 12, 2021 4:38 pm Post subject: Europa pitot tube piping and connections

Chris, 

Check your static probe under the wing still has the black “plug” in place , can get knocked of easily, result is ineffective asi ... ( you need a pressure differential and this effectively cancels it out ) ..symptom is taxi test that shows extreme asi lag .. 

disconnecting static line restores asi ... ( removes the balancing air stream ) ...



Slight air leaks in asi feed do not create the same ( massive ) effect.



The actual flow when you try to blow through is also relatively high resistance in normal operation .



Regards

Kevin Burns 



Sent from my iPad

 	  Quote: 	
		   On 7 Dec 2020, at 20:36, Chris Callicott <c.callicott1(at)btinternet.com> wrote:

 

 

 

 Evening All, I am preparing a UK built (2007) Europa XS tri-gear which I purchased last year for a permit check flight. The aircraft has not flown for 7 years. I believe I have a leak in the pitot tube system. Pitot and static lines passing through the  fuselage to the instrument panel seem to be made of semi-opaque hard plastic tubing approx 7.5mm OD and use 'push-fit' connectors. An adaptor connects the push-fit connector to standard ?6mm flexible clear tubing to the flight instruments.

 Is this a typical arrangement in Europas and where would I source the larger tubing and push-fit connectors? Many thanks, Chris

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=499625#499625

 

 

 

 

 

 

====================================
	


====================================

====================================

====================================

====================================

 	  Quote:

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

image1.jpeg

Description:

Filesize:

392.38 KB

Viewed:

1763 Time(s)

Chris Callicott

Joined: 05 Nov 2020
Posts: 6

Posted: Tue Mar 30, 2021 4:55 am Post subject: Re: Europa pitot tube piping and connections

A very belated thanks for your reply Kevin.

Problem now sorted.

Test flight very soon!

Chris

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum