|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
mikepienaar09(at)gmail.co Guest
|
Posted: Sat Mar 06, 2021 7:24 pm Post subject: EFIS Erratic Temp Readings |
|
|
Hello
Update on my erratic temp readings, I shorted all the temp inputs and connected one shielded CHT temperature sensor and the problem went away. Have now replaced all CHT sensors with shielded sensors that I made up using K type thermocouple wire from Aircraft Spruce and shielded it with braid grounded at one end. Everything stable now.
I have an MGL EFIS and had erratic EGT and CHT temp readings. EGT sensors seem to be grounded already and did not cause a problem once I shorted unused inputs.
Thanks for all the help
Mike
From: owner-aeroelectric-list-server(at)matronics.com <owner-aeroelectric-list-server(at)matronics.com> On Behalf Of Charlie England
Sent: February 6, 2021 4:40 PM
To: aeroelectric-list(at)matronics.com
Subject: Re: EFIS Erratic Temp Readings
snipped
Quote: |
Did you put shorts across them or were they
simply disconnected?
No, they were not shorted, simply disconnected. Will try with them shorted next week.
I would never have thought of shorting them
I did remove the alternator and ran the engine with no alternator and that made no difference,
Readings were still erratic
Thanks
Mike
|
Hi Mike,
Can you remind us whether the engine is 'standard' mags & carb (or Bendix style injection), or if it has some combination of electronic ignition/fuel injection?
Thanks,
Charlie
Virus-free. www.avast.com
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
mikepienaar09(at)gmail.co Guest
|
Posted: Sun Apr 11, 2021 6:23 pm Post subject: EFIS Erratic Temp Readings |
|
|
Thanks
My readings have now stabilised after I shorted the unused "ports" and put
grounded shields on the leads
Thanks
--
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|