Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

CS prop system

Matronics Email Lists Forum Index -> Lom-List

View previous topic :: View next topic

Author Message

sjbeaver(at)gmail.com
Guest

Posted: Mon Dec 20, 2021 7:57 am Post subject: CS prop system

I have a great deal of reference information on LOM engines and props, but I can find nothing at all about the constant speed prop adaptor shown in the picture below. I assume the gold part contains high pressure seals and passes oil into the crankshaft, then through the aluminum turning and into the prop.

Does anyone have any information on this assembly? I need to convert the engine to a fixed pitch wooden prop and a drawing would help me do that with more confidence.



THanks, Steve-- Stephen BeaverTel:     614-937 4189



 

[img]cid:nIA9oXul2LhsD6ovRYFl[/img]

- The Matronics Lom-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Lom-List

nIA9oXul2LhsD6ovRYFl.jpeg

Description:

Filesize:

220.76 KB

Viewed:

5715 Time(s)

sjbeaver(at)gmail.com
Guest

Posted: Tue Dec 21, 2021 5:31 am Post subject: CS prop system

Thank you Mike,

My challenge is how to remove the prop hub and the gold colored seal assembly. There appear to be no drawings available for that. The problem with working on props is that without a drawing is that you can't tell whether something isn't supposed to come off that way or just needs a bigger hammer  Steve-- Stephen BeaverTel:     614-937 4189



 

  	  Quote: 	
		  On Dec 20, 2021, at 22:54, <mikepienaar09(at)gmail.com (mikepienaar09(at)gmail.com)> <mikepienaar09(at)gmail.com (mikepienaar09(at)gmail.com)> wrote:

I have attached scans from my prop manual for a V451 and apologise for the poor quality but that is all that I have. 

If I can assist you further do not hesitate to ask

Hope this helps you

 

Keep well

 

Mike

 

 

 

 

From: owner-lom-list-server(at)matronics.com (owner-lom-list-server(at)matronics.com) <owner-lom-list-server(at)matronics.com (owner-lom-list-server(at)matronics.com)> On Behalf Of sjbeaverSent: December 20, 2021 7:57 AMTo: Lom-List Digest Server <lom-list(at)matronics.com (lom-list(at)matronics.com)>Subject: CS prop system

 

I have a great deal of reference information on LOM engines and props, but I can find nothing at all about the constant speed prop adaptor shown in the picture below. I assume the gold part contains high pressure seals and passes oil into the crankshaft, then through the aluminum turning and into the prop.

 



Does anyone have any information on this assembly? I need to convert the engine to a fixed pitch wooden prop and a drawing would help me do that with more confidence.



 



THanks,

Steve-- Stephen BeaverTel:     614-937 4189



 

<image001.jpg>



 

<LOM PROP 1.jpg><LOM PROP 2.jpg>

- The Matronics Lom-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Lom-List

mikepienaar09(at)gmail.co
Guest

Posted: Tue Dec 21, 2021 9:27 am Post subject: CS prop system

Yes, I see the problem now Forgot that my engine arrived with the gold coloured hub attached

If you do get it off what will you replace it with?

Keep well 

Mike 



Sent from my iPhone



 	  Quote: 	
		  On Dec 21, 2021, at 5:31 AM, sjbeaver <sjbeaver(at)gmail.com> wrote:



ï»¿Thank you Mike,

My challenge is how to remove the prop hub and the gold colored seal assembly. There appear to be no drawings available for that. The problem with working on props is that without a drawing is that you can't tell whether something isn't supposed to come off that way or just needs a bigger hammer  Steve-- Stephen BeaverTel:     614-937 4189



 

  	  Quote: 	
		  On Dec 20, 2021, at 22:54, <mikepienaar09(at)gmail.com (mikepienaar09(at)gmail.com)> <mikepienaar09(at)gmail.com (mikepienaar09(at)gmail.com)> wrote:

I have attached scans from my prop manual for a V451 and apologise for the poor quality but that is all that I have. 

If I can assist you further do not hesitate to ask

Hope this helps you

 

Keep well

 

Mike

 

 

 

 

From: owner-lom-list-server(at)matronics.com (owner-lom-list-server(at)matronics.com) <owner-lom-list-server(at)matronics.com (owner-lom-list-server(at)matronics.com)> On Behalf Of sjbeaverSent: December 20, 2021 7:57 AMTo: Lom-List Digest Server <lom-list(at)matronics.com (lom-list(at)matronics.com)>Subject: CS prop system

 

I have a great deal of reference information on LOM engines and props, but I can find nothing at all about the constant speed prop adaptor shown in the picture below. I assume the gold part contains high pressure seals and passes oil into the crankshaft, then through the aluminum turning and into the prop.

 



Does anyone have any information on this assembly? I need to convert the engine to a fixed pitch wooden prop and a drawing would help me do that with more confidence.



 



THanks,

Steve-- Stephen BeaverTel:     614-937 4189



 

<image001.jpg>



 

<LOM PROP 1.jpg><LOM PROP 2.jpg>

- The Matronics Lom-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Lom-List

sjbeaver(at)gmail.com
Guest

Posted: Tue Dec 21, 2021 9:28 am Post subject: CS prop system

The forward nose bearing case from a 332A or AK Steve-- Stephen BeaverTel:     614-937 4189



 

  	  Quote: 	
		  On Dec 21, 2021, at 12:27, mike Pienaar <mikepienaar09(at)gmail.com (mikepienaar09(at)gmail.com)> wrote:

Yes, I see the problem now Forgot that my engine arrived with the gold coloured hub attached

If you do get it off what will you replace it with?

Keep well 

Mike Sent from my iPhone

 	  Quote: 	
		  On Dec 21, 2021, at 5:31 AM, sjbeaver <sjbeaver(at)gmail.com (sjbeaver(at)gmail.com)> wrote:ï»¿Thank you Mike,

My challenge is how to remove the prop hub and the gold colored seal assembly. There appear to be no drawings available for that. The problem with working on props is that without a drawing is that you can't tell whether something isn't supposed to come off that way or just needs a bigger hammer  Steve-- Stephen BeaverTel:     614-937 4189



 

  	  Quote: 	
		  On Dec 20, 2021, at 22:54, <mikepienaar09(at)gmail.com (mikepienaar09(at)gmail.com)> <mikepienaar09(at)gmail.com (mikepienaar09(at)gmail.com)> wrote:

I have attached scans from my prop manual for a V451 and apologise for the poor quality but that is all that I have. 

If I can assist you further do not hesitate to ask

Hope this helps you

 

Keep well

 

Mike

 

 

 

 

From: owner-lom-list-server(at)matronics.com (owner-lom-list-server(at)matronics.com) <owner-lom-list-server(at)matronics.com (owner-lom-list-server(at)matronics.com)> On Behalf Of sjbeaverSent: December 20, 2021 7:57 AMTo: Lom-List Digest Server <lom-list(at)matronics.com (lom-list(at)matronics.com)>Subject: CS prop system

 

I have a great deal of reference information on LOM engines and props, but I can find nothing at all about the constant speed prop adaptor shown in the picture below. I assume the gold part contains high pressure seals and passes oil into the crankshaft, then through the aluminum turning and into the prop.

 



Does anyone have any information on this assembly? I need to convert the engine to a fixed pitch wooden prop and a drawing would help me do that with more confidence.



 



THanks,

Steve-- Stephen BeaverTel:     614-937 4189



 

<image001.jpg>



 

<LOM PROP 1.jpg><LOM PROP 2.jpg>

- The Matronics Lom-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Lom-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Lom-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum