Matronics Email Lists :: View topic - Reverse Engineering JPI Engine Monitor Interfaces

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Reverse Engineering JPI Engine Monitor Interfaces

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

email(at)jaredyates.com
Guest

Posted: Tue Jan 11, 2022 6:37 pm Post subject: Reverse Engineering JPI Engine Monitor Interfaces

I have purchased a plane that came with an old JPI EDM-700 engine monitor. This is the one with the orange and black display that shows bar graphs for EGT, CHT, etc. It has a data logging capability, but the interface requires their cable, which I don't have:https://www.jpinstruments.com/shop/pc-interface-cable-for-edm-700-edm-800-and-edm-760/



This looks like something that I could make out of things I have laying around the shop, vs spending $40 plus shipping. Does anyone have one sitting around that they could do some continuity testing on? If the little plug only has two conductors, I would guess that there must be two pins on the serial end that they are connected to.

JPI also offers a box that takes the serial from that cable and writes to a USB drive. They charge $200 for that box, and I'd love to see what's in one of those. 

Another option is to send the unit into JPI, where they will modify it to have a USB interface for $300.

And of course there is always the option of just pretending like it doesn't record data, but where's the fun in that?

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

user9253

Joined: 28 Mar 2008
Posts: 1925
Location: Riley TWP Michigan

Posted: Wed Jan 12, 2022 7:24 am Post subject: Re: Reverse Engineering JPI Engine Monitor Interfaces

Buy a USB-Serial converter.  Research them to get the best chipset.

eBay has converters with a terminal strip for attaching wires.

Connect two wires from the DC plug to the USB-Serial converter.

Nine pin D-Subs are not required.

I have never actually done this.  So I don't know if it will work or not.

But if it works, it will only cost you $10 instead of $300.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Joe Gores

cjfortin

Joined: 05 Jan 2013
Posts: 4

Posted: Wed Jan 12, 2022 7:53 am Post subject: Re: Reverse Engineering JPI Engine Monitor Interfaces

If it is a standard RS232 connection, pins 2 & 3 are your transmit and receive signals.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

rs232-pinout.jpg

Description:

Filesize:

30.71 KB

Viewed:

2143 Time(s)

email(at)jaredyates.com
Guest

Posted: Wed Jan 12, 2022 9:21 am Post subject: Reverse Engineering JPI Engine Monitor Interfaces

Thanks Joe, I was starting to think the same thing. Seems like a lot of doing then un-doing that could be skipped, when all we're really after is a tx and an rx.



On Wed, Jan 12, 2022 at 10:31 AM user9253 <fransew(at)gmail.com (fransew(at)gmail.com)> wrote:



 	  Quote: 	
		  --> AeroElectric-List message posted by: "user9253" <fransew(at)gmail.com (fransew(at)gmail.com)>

 

 Buy a USB-Serial converter.  Research them to get the best chipset.

 eBay has converters with a terminal strip for attaching wires.

 Connect two wires from the DC plug to the USB-Serial converter.

 Nine pin D-Subs are not required.

 I have never actually done this.  So I don't know if it will work or not.

 But if it works, it will only cost you $10 instead of $300.

 

 --------

 Joe Gores

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=505670#505670

 

 

 

 

 

 

 ===========

  -

 Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List

 ===========

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ===========

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ===========

 b Site -

           -Matt Dralle, List Admin.

 ="noreferrer" target="_blank">https://matronics.com/contribution

 ===========

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Peter(at)sportingaero.com
Guest

Posted: Sun Jan 16, 2022 2:37 am Post subject: Reverse Engineering JPI Engine Monitor Interfaces

From what I remember from an aeroplane I sold 15 years ago this is a straight RS 232 interface but the serial to USB converter is key, not all work. Don’t forget to switch the Rx & Tx pins on the way to the computer. I believe it is only a 2 wire interface, so I’m guessing the Rx (3) and Gnd (5) pins (at the computer end) are connected?

 

See also https://mooneyspace.com/topic/35740-jpi-700-cell-phone-serial-data-cable/

 

From: owner-aeroelectric-list-server(at)matronics.com <owner-aeroelectric-list-server(at)matronics.com> On Behalf Of Jared Yates

Sent: 12 January 2022 02:36

To: aeroelectric-list(at)matronics.com

Subject: Reverse Engineering JPI Engine Monitor Interfaces



 

I have purchased a plane that came with an old JPI EDM-700 engine monitor. This is the one with the orange and black display that shows bar graphs for EGT, CHT, etc. It has a data logging capability, but the interface requires their cable, which I don't have:

https://www.jpinstruments.com/shop/pc-interface-cable-for-edm-700-edm-800-and-edm-760/



This looks like something that I could make out of things I have laying around the shop, vs spending $40 plus shipping. Does anyone have one sitting around that they could do some continuity testing on? If the little plug only has two conductors, I would guess that there must be two pins on the serial end that they are connected to.



JPI also offers a box that takes the serial from that cable and writes to a USB drive. They charge $200 for that box, and I'd love to see what's in one of those. 



Another option is to send the unit into JPI, where they will modify it to have a USB interface for $300.



And of course there is always the option of just pretending like it doesn't record data, but where's the fun in that?

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum