|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
jeffbudner
Joined: 20 Aug 2020 Posts: 18 Location: Rio Vista airport
|
Posted: Thu Mar 17, 2022 10:03 am Post subject: Suspending the fuselage for removal of the main gear |
|
|
Hi All, I have a need to remove the main gear of my TR-1. In searching the archives, I found one thread that suggests supporting the plane at the wing roots. I've also considered strapping the fuselage and lifting with a hoist, assuming I can rent one that has a long enough arm. Are there other options that I haven't considered?
Thanks much,
Jeff Budner
KIS TR-1 # 099
| - The Matronics KIS-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
Back to top |
|
|
craneplanes
Joined: 15 Jun 2021 Posts: 15
|
Posted: Thu Mar 17, 2022 10:20 am Post subject: Suspending the fuselage for removal of the main gear |
|
|
[img]cid:17f99127267207cf5f01[/img]
I did the following:
- traced the airfoil shape from the wing tip on a 2x8 board
- cut out the airfoil shape
- used that as a template to cut 3 more 2x8 boards for a total of 4 (2 under each wing)
- put foam pool noodles on the boards where they’ll be in contact with the bottom of the wings
- built vertical supports out of 2x4’s
- lifted the 2x8’s with an engine hoist and lift straps and attached to the vertical supports with long screws (see photo)
- repeat for other side
-Doug Crane
KIS TR-4 N302KM
On Thu, Mar 17, 2022 at 13:04 jeffbudner <jeffbudner(at)gmail.com (jeffbudner(at)gmail.com)> wrote:
Quote: | --> KIS-List message posted by: "jeffbudner" <jeffbudner(at)gmail.com (jeffbudner(at)gmail.com)>
Hi All, I have a need to remove the main gear of my TR-1. In searching the archives, I found one thread that suggests supporting the plane at the wing roots. I've also considered strapping the fuselage and lifting with a hoist, assuming I can rent one that has a long enough arm. Are there other options that I haven't considered?
Thanks much,
Jeff Budner
KIS TR-1 # 099
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=506333#506333
===========
List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?KIS-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
="noreferrer" target="_blank">https://matronics.com/contribution
===========
|
| - The Matronics KIS-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
Description: |
|
Filesize: |
1.3 MB |
Viewed: |
5898 Time(s) |
|
|
|
Back to top |
|
|
jeffbudner
Joined: 20 Aug 2020 Posts: 18 Location: Rio Vista airport
|
Posted: Thu Mar 17, 2022 11:06 am Post subject: Re: Suspending the fuselage for removal of the main gear |
|
|
Thanks Doug, for the good idea and posting a pic, that makes for a good model to follow.
Jeff Budner
KIS TR-1 # 099
| - The Matronics KIS-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|