 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
andymeyer
Joined: 31 Mar 2015
Posts: 54
Location: SW MI
|
 Posted: Wed May 11, 2022 7:07 pm Post subject: Engine Monitor - Homebuilt Style... |
 |
|
So, this came up in another thread and I was asked to share... Plan is to write it up for Sport Aviation, but this group has been such a help over the years, and such a knowledge-base for both my fun and my engineering career, I'll share here.
As is the expectation of this group, I want to learn how to do this better as well. I have thick skin and am open to making this better. My wife laughs every time I cringe and delete all of the traces on the PCBA design software and start re-laying out the boards. It's part of the sickness. This is experimental.
I needed a good, data recording engine monitor for my Long EZ. I wanted a better leaning algorithm that I could find on the market, a basic air data computer, more I/O, and a simple interface. The first picture shows the new screen - 3.5" capacitive touch screen in operation, the 2.8" screen for comparison (half the resolution of the 3.5") and the first revision of the PCBA's. The next revision is on its way.
The system consists of a module that sits near the engine on my Long EZ which runs a Teensy 3.6 microcontroller that is attached to a board I designed that collects data from 20 channels filters it and sends it via RS232 to the display module. The display module collects another 10 channels of data (and has spare serial inputs for expansion) and processes it on a Teensy 4.1. It stores it every .5 second on a uSD card and displays it.
I'm currently flying with the 2.8" version and really like the clear presentation of data, though the 3.5" version affords me more data on the screen at a time and easier viewing. The 3.5" version will be installed with the panel upgrade that I'm getting help with in another thread. Future updates to the software will include some AI for predictive performance and engine health monitoring...
The PCBA designs are done (and redone, and redone) in upverter - a great free circuit design tool.The enclosures are designed in onshape and the software is all C, written in the Arduino IDE. If anyone is interested in helping this project along, I'm game... Charlie, passing the joint. My wife and I got a kick out of the video (after the kids were in bed.)
Andy
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
| Description: |
|
| Filesize: |
2.54 MB |
| Viewed: |
1492 Time(s) |
|
| Description: |
|
| Filesize: |
2.11 MB |
| Viewed: |
1492 Time(s) |
|
|
|
| Back to top |
|
 |
Ceengland
Joined: 11 Oct 2020
Posts: 391
Location: MS
|
| Posted: Thu May 12, 2022 4:19 am Post subject: Engine Monitor - Homebuilt Style... |
|
|
On Wed, May 11, 2022 at 10:11 PM andymeyer <meyerkc135(at)gmail.com (meyerkc135(at)gmail.com)> wrote:
| Quote: | --> AeroElectric-List message posted by: "andymeyer" <meyerkc135(at)gmail.com (meyerkc135(at)gmail.com)>
So, this came up in another thread and I was asked to share... Plan is to write it up for Sport Aviation, but this group has been such a help over the years, and such a knowledge-base for both my fun and my engineering career, I'll share here.
As is the expectation of this group, I want to learn how to do this better as well. I have thick skin and am open to making this better. My wife laughs every time I cringe and delete all of the traces on the PCBA design software and start re-laying out the boards. It's part of the sickness. This is experimental.
I needed a good, data recording engine monitor for my Long EZ. I wanted a better leaning algorithm that I could find on the market, a basic air data computer, more I/O, and a simple interface. The first picture shows the new screen - 3.5" capacitive touch screen in operation, the 2.8" screen for comparison (half the resolution of the 3.5") and the first revision of the PCBA's. The next revision is on its way.
The system consists of a module that sits near the engine on my Long EZ which runs a Teensy 3.6 microcontroller that is attached to a board I designed that collects data from 20 channels filters it and sends it via RS232 to the display module. The display module collects another 10 channels of data (and has spare serial inputs for expansion) and processes it on a Teensy 4.1. It stores it every .5 second on a uSD card and displays it.
I'm currently flying with the 2.8" version and really like the clear presentation of data, though the 3.5" version affords me more data on the screen at a time and easier viewing. The 3.5" version will be installed with the panel upgrade that I'm getting help with in another thread. Future updates to the software will include some AI for predictive performance and engine health monitoring...
The PCBA designs are done (and redone, and redone) in upverter - a great free circuit design tool.The enclosures are designed in onshape and the software is all C, written in the Arduino IDE. If anyone is interested in helping this project along, I'm game... Charlie, passing the joint. My wife and I got a kick out of the video (after the kids were in bed.)
Andy |
That is truly impressive! I wish I had the skillset to help with a project like that, but I'm limited to making paths for electrons & troubleshooting path failures. I learned over 50 years ago that I should leave programming (and singing) to others. If you decide to make the circuit design & the software open source, it could be very useful to those of us installing alternative engines. Using water cooling means that there are orders of magnitude more parameters that need to be monitored and optimized, to get an efficient installation, so having all those inputs available would be great.
Glad you like the 'Bogart' reference.  It's basically just a 'throw away' novelty cut from that album, but it's fun. The rest is a masterpiece. Don't know if you're old enough to have heard it, but after almost 45 years, it would still make my top 20 list (and I have a long list). The band would probably make my top 10 list.
Charlie
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________
Charlie |
|
| Back to top |
|
|
andymeyer
Joined: 31 Mar 2015
Posts: 54
Location: SW MI
|
| Posted: Thu May 12, 2022 6:03 pm Post subject: Re: Engine Monitor - Homebuilt Style... |
|
|
Charlie,
Thanks! It's coming along. I am more than willing to share the design on a limited basis (my wife and I were talking about this topic last night, but exploring the right options to protect, but grow and develop the design.
Drop me an email at meyer f 16 via googles email and let's see if we can get something that meets your needs for the alternative engine. This could be a solution. I've got plenty of water cooled experience, but not aviation water cooled experience.
I learned a lot of this along the way - relearned things from years past and got some help here and there. I also learned to resize my pics before posting on the AeroElectric list.
Andy
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
