 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
chic
Joined: 12 Apr 2019
Posts: 55
Location: Riverside Calif
|
 Posted: Sat Jul 09, 2022 1:18 pm Post subject: Phazer conversion for Firestar 2 |
 |
|
Just did weight and balance on my Kolb Firestar 2 after Phazer swap. Plane weighed 38 lbs heavier with Yamaha than the 503 Rotax/B box with 60" Warp Drive. I also added 5" gear leg extensions, Disc brakes and am using a SPG4 gearbox/clutch that weighs 4-5 lbs (at least) more than the Rotax C box/clutch setup and a 68" Powerfin prop at the same time. Added all that stuff and 30 more HP for only 38lbs and less than half the fuel burn! WOO HOO, time to take her out and see what she will do!
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
 |
Ceengland
Joined: 11 Oct 2020
Posts: 391
Location: MS
|
| Posted: Sun Aug 07, 2022 4:36 am Post subject: Re: Phazer conversion for Firestar 2 |
|
|
Hi Chic,
Congrats! Let us know how it flies. I'd love to see pics of your SPG4 adaptation to the Phazer, too. Post 'em here, or feel free to send them directly to me, if you still have my email address from our discussion about my Twinstar.
Charlie
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
Charlie |
|
| Back to top |
|
|
Richard Pike
Joined: 09 Jan 2006
Posts: 1671
Location: Blountville, Tennessee
|
| Posted: Tue Aug 09, 2022 4:33 pm Post subject: Re: Phazer conversion for Firestar 2 |
|
|
Post 'em here. The rest of us are curious too!
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0
Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing. |
|
| Back to top |
|
|
roy.spangler(at)kirtland.
Guest
|
| Posted: Wed Aug 10, 2022 7:15 am Post subject: Phazer conversion for Firestar 2 |
|
|
The Yamaha engines such as the Phazer have a 5 valve per
cylinder that really breathes. That is why the engines put
out a lot of power for their size. Steve Henry uses a modified
RX1 Yamaha in his modified Highlander.
roy
On Tue, Aug 9, 2022 at 8:34 PM Richard Pike <thegreybaron(at)charter.net (thegreybaron(at)charter.net)> wrote:
| Quote: | --> Kolb-List message posted by: "Richard Pike" <thegreybaron(at)charter.net (thegreybaron(at)charter.net)>
Post 'em here. The rest of us are curious too!
--------
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0
Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=507640#507640
===========
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Kolb-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
="noreferrer" target="_blank">https://matronics.com/contribution
===========
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
chic
Joined: 12 Apr 2019
Posts: 55
Location: Riverside Calif
|
| Posted: Tue Oct 04, 2022 9:41 pm Post subject: Re: Phazer conversion for Firestar 2 |
|
|
Sorry Guys, Shortly after my post on 9 July I suffered a detached retina in my left eye and havent actually had a chance to get her off the ground yet. Took her to Kingman airport twice to fly it and both times 40-50 degree crosswinds gusting 20-25 mph and didnt want to do first flights under those conditions. Soon as I get the eye straightened up Ill put her in the air and let you know how she does. Here is pic of SPG4 gearbox on my rig. I will take some closer pics and post here tomorrow Chic
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
| Filesize: |
909.19 KB |
| Viewed: |
5162 Time(s) |
|
|
|
| Back to top |
|
|
chic
Joined: 12 Apr 2019
Posts: 55
Location: Riverside Calif
|
| Posted: Tue Oct 04, 2022 9:52 pm Post subject: Re: Phazer conversion for Firestar 2 |
|
|
another pic
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
| Filesize: |
1.05 MB |
| Viewed: |
5141 Time(s) |
|
| Description: |
|
| Filesize: |
100.27 KB |
| Viewed: |
5141 Time(s) |
|
| Description: |
|
| Filesize: |
834.17 KB |
| Viewed: |
5141 Time(s) |
|
| Description: |
|
| Filesize: |
245.93 KB |
| Viewed: |
5141 Time(s) |
|
| Description: |
|
| Filesize: |
100.27 KB |
| Viewed: |
5141 Time(s) |
|
|
|
| Back to top |
|
|
Ceengland
Joined: 11 Oct 2020
Posts: 391
Location: MS
|
| Posted: Wed Oct 05, 2022 4:14 am Post subject: Phazer conversion for Firestar 2 |
|
|
Nice!
Can you refresh my memory? did you have to make your own adapter plate for the redrive, or did it come to you ready to bolt on?
Charlie
On Wed, Oct 5, 2022 at 12:53 AM chic <gcechini(at)msn.com (gcechini(at)msn.com)> wrote:
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
Charlie |
|
| Back to top |
|
|
Ceengland
Joined: 11 Oct 2020
Posts: 391
Location: MS
|
| Posted: Wed Oct 05, 2022 4:17 am Post subject: Phazer conversion for Firestar 2 |
|
|
Sorry to hear about your eye problems; that's got to be scary. My father had them in both eyes and it forced an early retirement (he was an electrician, & the doc advised that he quit sticking his hands in 'hot' electrical panels).
On Wed, Oct 5, 2022 at 12:42 AM chic <gcechini(at)msn.com (gcechini(at)msn.com)> wrote:
| Quote: | --> Kolb-List message posted by: "chic" <gcechini(at)msn.com (gcechini(at)msn.com)>
Sorry Guys, Shortly after my post on 9 July I suffered a detached retina in my left eye and havent actually had a chance to get her off the ground yet. Took her to Kingman airport twice to fly it and both times 40-50 degree crosswinds gusting 20-25 mph and didnt want to do first flights under those conditions. Soon as I get the eye straightened up Ill put her in the air and let you know how she does. Here is pic of SPG4 gearbox on my rig. I will take some closer pics and post here tomorrow Chic
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
Charlie |
|
| Back to top |
|
|
chic
Joined: 12 Apr 2019
Posts: 55
Location: Riverside Calif
|
| Posted: Fri Oct 07, 2022 5:26 pm Post subject: Re: Phazer conversion for Firestar 2 |
|
|
The SPG4 came as a package out of Russia. Paid $2400 for adapter, clutch and gearbox. 3.0 ratio with 68" Powerfin. Engine has a 12,000 rpm redline and has a 1.43 to 1 internal reduction. Most guys are proping them to 9500-10,000 engine rpm. At that, with my 3 to 1 box it will give me a wide open prop speed of around 2335 rpm.
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
