 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
wdaniell.longport(at)gmai
Guest
|
 Posted: Sun Dec 18, 2022 5:19 pm Post subject: Z 16 question |
 |
|
I am refitting my old voltage regulator after a failure of the bandc one I installed a year ago.  The bandc has built in ovp. I am assuming that this is a manufacturing defect ...i had a very early version.
I have ordered a new one.
Meantime i am refitting a rotax regulator and I am also refitting my old ovp/relay
The z 16 shows the ovp from master to ground at the panel.
Could I install the ovp at the relay end to ground at the firewall?
Thanks
Will
William Daniell
+1 786 878 0246
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
user9253
Joined: 28 Mar 2008
Posts: 1927
Location: Riley TWP Michigan
|
| Posted: Mon Dec 19, 2022 9:28 am Post subject: Re: Z 16 question |
|
|
If you mean that you want to connect the over-voltage protection device to
the the other end of the same wire, then yes you can.
Another option is to connect the over-voltage protection device to the
downstream side of the 5 amp alternator breaker.
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________
Joe Gores |
|
| Back to top |
|
|
wdaniell.longport(at)gmai
Guest
|
| Posted: Mon Dec 19, 2022 11:30 am Post subject: Z 16 question |
|
|
Joe
Much appreciated
Thanks
Will
On Mon, Dec 19, 2022, 12:33 user9253 <fransew(at)gmail.com (fransew(at)gmail.com)> wrote:
| Quote: | --> AeroElectric-List message posted by: "user9253" <fransew(at)gmail.com (fransew(at)gmail.com)>
If you mean that you want to connect the over-voltage protection device to
the the other end of the same wire, then yes you can.
Another option is to connect the over-voltage protection device to the
downstream side of the 5 amp alternator breaker.
--------
Joe Gores
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=509726#509726
===========
-
Electric-List" rel="noreferrer noreferrer noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
===========
FORUMS -
eferrer noreferrer noreferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer noreferrer noreferrer" target="_blank">http://wiki.matronics.com
===========
b Site -
     -Matt Dralle, List Admin.
="noreferrer noreferrer noreferrer" target="_blank">https://matronics.com/contribution
===========
|
William Daniell
+1 786 878 0246
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
nuckolls.bob(at)aeroelect
Guest
|
| Posted: Mon Dec 19, 2022 1:42 pm Post subject: Z 16 question |
|
|
At 07:18 PM 12/18/2022, you wrote:
| Quote: | I am refitting my old voltage regulator after a failure of the bandc one I installed a year ago.  The bandc has built in ovp. I am assuming that this is a manufacturing defect ...i had a very early version.
I have ordered a new one. |
Take a look at the B&C current offering for
PM rectifier/regulators at:
https://tinyurl.com/2lr4u6o6
The old regulators (including the last Rotax I saw)
are 3 decades old technology.
The AVC1 R/R has ov protection plus alternator control
relay built in. Everything in one box and 30 years
'younger'.
| Quote: | Meantime i am refitting a rotax regulator and I am also refitting my old ovp/relay
The z 16 shows the ovp from master to ground at the panel.
Could I install the ovp at the relay end to ground at the firewall? |
Yes
Bob . . .
Un impeachable logic: George Carlin asked, "If black boxes
survive crashes, why don't they make the whole airplane
out of that stuff?"
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
wdaniell.longport(at)gmai
Guest
|
| Posted: Tue Dec 20, 2022 5:23 pm Post subject: Z 16 question |
|
|
Bob
thanks.
Rotax regulator fitted with old style OVP at the relay end...everything stable and radio noise gone.
I am sending the AVC1 to bandc
Will
William Daniell
LONGPORT
+1 786 878 0246
On Mon, Dec 19, 2022 at 4:46 PM Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:
| Quote: | At 07:18 PM 12/18/2022, you wrote:
| Quote: | I am refitting my old voltage regulator after a failure of the bandc one I installed a year ago.  The bandc has built in ovp. I am assuming that this is a manufacturing defect ...i had a very early version.
I have ordered a new one. |
 Take a look at the B&C current offering for
 PM rectifier/regulators at:
https://tinyurl.com/2lr4u6o6
 The old regulators (including the last Rotax I saw)
 are 3 decades old technology.
 The AVC1 R/R has ov protection plus alternator control
 relay built in. Everything in one box and 30 years
 'younger'.
| Quote: | Meantime i am refitting a rotax regulator and I am also refitting my old ovp/relay
The z 16 shows the ovp from master to ground at the panel.
Could I install the ovp at the relay end to ground at the firewall? |
 Yes
 Bob . . .
 Un impeachable logic: George Carlin asked, "If black boxes
 survive crashes, why don't they make the whole airplane
 out of that stuff?"
|
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
