 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
werner schneider
Joined: 24 May 2021
Posts: 59
|
 Posted: Sat Feb 18, 2023 2:35 pm Post subject: 2010 doors recess different height :( |
 |
|
I know, I have an old Kit (2010) and the doors are a pain, but why does itneed to be more complicated. I wanted to have everything properly aligned so as less kink and friction as possible. But I did not see, that the left and right door position of the recess in the inner door are different!! teh left door the recess is starting 3/4 from the bottom, the right it starts 1/2".
I hope the newer kit have better parts 🥴
oh well another 5 hours to correct that missformed part...
Not amused Werner
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
336.89 KB |
| Viewed: |
5901 Time(s) |
|
|
|
| Back to top |
|
 |
werner schneider
Joined: 24 May 2021
Posts: 59
|
| Posted: Sat Feb 18, 2023 4:02 pm Post subject: 2010 doors recess different height :( |
|
|
and the guide blocks are the same amount off, as I have the planearound
center lock it would protrude 3/16 on the bottom so that does not work
and we will have another few hours glass work at the blocks location.
life aint simple 
On 18.02.2023 23:35, werner schneider wrote:
| Quote: |
I know, I have an old Kit (2010) and the doors are a pain, but why does itneed to be more complicated. I wanted to have everything properly aligned so as less kink and friction as possible. But I did not see, that the left and right door position of the recess in the inner door are different!! teh left door the recess is starting 3/4 from the bottom, the right it starts 1/2".
I hope the newer kit have better parts 🥴
oh well another 5 hours to correct that missformed part...
Not amused Werner
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=510241#510241
Attachments:
http://forums.matronics.com//files/faulty_recess_155.jpg
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
sandro(at)lumiella.com
Guest
|
| Posted: Sat Feb 18, 2023 8:34 pm Post subject: 2010 doors recess different height :( |
|
|
Hi Werner,
I have the 2012 doors and I think they are the same.
In the end my measurements are not the same between the two doors, but still they open and close perfectly.
The blocks on the sides will make a difference, it is these that need to be filed down to have a perfect opening and closing.
It took me forever to make them and the outside and gap I have yet to do but I have good examples that simplify it.
Maybe one time let's get in touch
Sandro
-------- Messaggio originale --------
Da: Werner Schneider <glastar(at)gmx.net>
Data: 19/02/23 03:07 (GMT+03:00)
A: rv10-list(at)matronics.com
Oggetto: Re: RV10-List: 2010 doors recess different height
--> RV10-List message posted by: Werner Schneider <glastar(at)gmx.net>
and the guide blocks are the same amount off, as I have the planearound
center lock it would protrude 3/16 on the bottom so that does not work
and we will have another few hours glass work at the blocks location.
life aint simple
On 18.02.2023 23:35, werner schneider wrote:
| Quote: | --> RV10-List message posted by: "werner schneider" <glastar(at)gmx.net>
I know, I have an old Kit (2010) and the doors are a pain, but why does itneed to be more complicated. I wanted to have everything properly aligned so as less kink and friction as possible. But I did not see, that the left and right door position of the recess in the inner door are different!! teh left door the recess is starting 3/4 from the bottom, the right it starts 1/2".
I hope the newer kit have better parts 🥴
oh well another 5 hours to correct that missformed part...
Not amused Werner
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=510241#510241
Attachments:
http://forums.matronics.com//files/faulty_recess_155.jpg
|
_-============================================================
_-= - The RV10-List Email Forum -
_-= Use the Matronics List Features Navigator to browse
_-= the many List utilities such as List Un/Subscription,
_-= Archive Search & Download, 7-Day Browse, Chat, FAQ,
_-= Photoshare, and much much more:
_-=
_-= --> http://www.matronics.com/Navigator?RV10-List
_-=
_-============================================================
_-= - MATRONICS WEB FORUMS -
_-= Same great content also available via the Web Forums!
_-=
_-= --> http://forums.matronics.com
_-=
_-============================================================
_-= - NEW MATRONICS LIST WIKI -
_-= Add some info to the Matronics Email List Wiki!
_-= --> http://wiki.matronics.com
_-============================================================
_-= - List Contribution Web Site -
_-= Thank you for your generous support!
_-= -Matt Dralle, List Admin.
_-= --> https://matronics.com/contribution
_-============================================================
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
werner schneider
Joined: 24 May 2021
Posts: 59
|
| Posted: Sun Feb 19, 2023 3:56 pm Post subject: 2010 doors recess different height :( |
|
|
Thanks Sandro,
It's just an annoyance, that the guys building the forms for these parts are not able to build a bit more to the standard the metal parts are. I thought I could relay, but 3/16 off is outside my standard so I cut and build up new as otherwise I would not have a straight line of action between handle and rods. It would work that way but as I don't like it I spend a few more hours correcting it.
Hope your engine is coming along nice 
My panel is just ordered.
Cheers Werner
On 19.02.2023 05:33, sandro wrote:
| Quote: | Hi Werner,
I have the 2012 doors and I think they are the same.
In the end my measurements are not the same between the two doors, but still they open and close perfectly.
The blocks on the sides will make a difference, it is these that need to be filed down to have a perfect opening and closing.
It took me forever to make them and the outside and gap I have yet to do but I have good examples that simplify it.
Maybe one time let's get in touch
SandroÂ
-------- Messaggio originale --------
Da: Werner Schneider <glastar(at)gmx.net> (glastar(at)gmx.net)
Data: 19/02/23 03:07 (GMT+03:00)
A: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Oggetto: Re: 2010 doors recess different height
--> RV10-List message posted by: Werner Schneider <glastar(at)gmx.net> (glastar(at)gmx.net)
and the guide blocks are the same amount off, as I have the planearound
center lock it would protrude 3/16 on the bottom so that does not work
and we will have another few hours glass work at the blocks location.
life aint simple
On 18.02.2023 23:35, werner schneider wrote:
> --> RV10-List message posted by: "werner schneider" <glastar(at)gmx.net> (glastar(at)gmx.net)
>
> I know, I have an old Kit (2010) and the doors are a pain, but why does itneed to be more complicated. I wanted to have everything properly aligned so as less kink and friction as possible. But I did not see, that the left and right door position of the recess in the inner door are different!! teh left door the recess is starting 3/4 from the bottom, the right it starts 1/2".
> I hope the newer kit have better parts 🥴
> oh well another 5 hours to correct that missformed part...
>
> Not amused Werner
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=510241#510241
>
>
>
>
> Attachments:
>
> http://forums.matronics.com//files/faulty_recess_155.jpg
>
>
>
>
>
>
======================================
10-List Email Forum -
http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
======================================
   - MATRONICS WEB FORUMS -
http://forums.matronics.com">http://forums.matronics.com
======================================
  - NEW MATRONICS LIST WIKI -
http://wiki.matronics.com">http://wiki.matronics.com
======================================
 - List Contribution Web Site -
                  -Matt Dralle, List Admin.
https://matronics.com/contribution">https://matronics.com/contribution
======================================
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
