Matronics Email Lists :: View topic - Fwd: Door latch shoot-bolt stop

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Fwd: Door latch shoot-bolt stop

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

lantieau

Joined: 29 Jan 2018
Posts: 3

Posted: Wed May 17, 2023 5:59 am Post subject: Fwd: Door latch shoot-bolt stop

Here's what you're looking for:

https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops



---------- Forwarded message ---------

From: Alan Burrill <alanb(at)dpy01.co.uk (alanb(at)dpy01.co.uk)>

Date: Wed, May 17, 2023 at 7:13 AM

Subject: Re: Door latch shoot-bolt stop

To: Europa Forum Forum <europa-list(at)matronics.com (europa-list(at)matronics.com)>



Someone on the WatsApp group were offering to do just that. I suggest a message on that group might get a response or even a link to a printing company that will do them.



You could always whittle down some hardwood 

Alan



 	  Quote: 	
		  On 17 May 2023, at 09:31, Mike <mike(at)nyumba.co.uk (mike(at)nyumba.co.uk)> wrote:



If anyone gets to print these shoot bolt stops in the UK, could I purchase a couple of sets please?

Thanks

 

From: owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com) [mailto:owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com)] On Behalf Of Alan Burrill

Sent: 16 May 2023 07:53

To: europa-list(at)matronics.com (europa-list(at)matronics.com)

Subject: Re: Door latch shoot-bolt stop

 

Shoot bolt stops

theeuropaclub.org



<image001.png>



 Sent from my iPad







On 16 May 2023, at 02:25, JonathanMilbank <jdmilbank(at)yahoo.co.uk (jdmilbank(at)yahoo.co.uk)> wrote:

 	  Quote: 	
		  

--> Europa-List message posted by: "JonathanMilbank" <jdmilbank(at)yahoo.co.uk (jdmilbank(at)yahoo.co.uk)>



Please would someone let me know, or send me the file, which would enable the 3D printing of a shoot-bolt stop. Mine has inevitably become damaged by the extended shoot-bolt, when a gust of wind caused the canopy door to slam down.



So far I've been unable to find the file either on the LAA or Europa Club websites.



Many thanks.





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=510803#510803

Area-51

Joined: 03 May 2021
Posts: 391

Posted: Wed May 17, 2023 11:09 pm Post subject: Re: Fwd: Door latch shoot-bolt stop

I can print them up on the Prusa if people want... just need numbers required and work out costs...

JonathanMilbank

Joined: 14 Apr 2012
Posts: 388
Location: Aberdeen area

Posted: Fri May 19, 2023 1:02 am Post subject: Re: Fwd: Door latch shoot-bolt stop

I would like to purchase a set of two in white plastic, provided that they don't cost more than the original amount of around £30 IIRC, which the LAA was wanting. Failing that I'll repair mine again with Superglue, which works really well. Thanks.

Area-51

Joined: 03 May 2021
Posts: 391

Posted: Fri May 19, 2023 3:34 am Post subject: Re: Fwd: Door latch shoot-bolt stop

Jonathan do you know what plastic they are made of? are they 3D printed pieces?

JonathanMilbank

Joined: 14 Apr 2012
Posts: 388
Location: Aberdeen area

Posted: Fri May 19, 2023 2:08 pm Post subject: Re: Fwd: Door latch shoot-bolt stop

Sorry, but I know little to nothing about 3D printing, except that something looking like fishing line feeds the machine. Yes they're made of plastic.

Area-51

Joined: 03 May 2021
Posts: 391

Posted: Fri May 19, 2023 6:55 pm Post subject: Re: Fwd: Door latch shoot-bolt stop

Will be cheaper to go the LAA route... with postage from Aus would make it £40 pair, printed in PLA. Up to 250g parcel, so more pairs bulk would bring costs down probanly.



How did it break? Did the door fall down with shoot bolt protruding?

JonathanMilbank

Joined: 14 Apr 2012
Posts: 388
Location: Aberdeen area

Posted: Sat May 20, 2023 12:16 am Post subject: Re: Fwd: Door latch shoot-bolt stop

Yep, that's exactly how it broke and no doubt the same will happen again and again. The material thickness is too light. The LAA seems to have washed their hands of producing the items and handed it over to the Europa Club "for free". In reality a club member still has to purchase the STL 3D files for this mod, which I feel is a bit "off". Especially as the member also has the cost of the 3D printer and materials.

Area-51

Joined: 03 May 2021
Posts: 391

Posted: Sat May 20, 2023 2:37 am Post subject: Re: Fwd: Door latch shoot-bolt stop

Hmm, washed their hands 🤔



Sounds like there will have to be another AD issued for a second piece added on top of the first one to protect it from damage!!



Can any designed piece be fitted or must it be LAA approved and supplied?



Unfamiliar with procedure...

JonathanMilbank

Joined: 14 Apr 2012
Posts: 388
Location: Aberdeen area

Posted: Sat May 20, 2023 10:55 am Post subject: Re: Fwd: Door latch shoot-bolt stop

As someone has already mentioned, it is permissible to whittle the item out of hardwood, but I don't have the skill set or inclination for that.

Area-51

Joined: 03 May 2021
Posts: 391

Posted: Sat May 20, 2023 2:23 pm Post subject: Re: Fwd: Door latch shoot-bolt stop

👍 thanks for the insight



Have you thought of making the piece out of layered ply or balsa wood? Or balsa with a 6mm top layer of ply?



3D print would need a thick core to prevent fracture.

Burrilla

Joined: 25 Apr 2015
Posts: 184

Posted: Sun May 21, 2023 12:15 am Post subject: Fwd: Door latch shoot-bolt stop

I am a Europa Club Member and have just downloaded the STL files at no cost from the club website so I don’t understand your comment;



 	  Quote: 	
		  >In reality a club member still has to purchase the STL 3D files for this mod, which I feel is a bit "off". <<


	


Alan

Sent from my iPad



 	  Quote: 	
		   On 20 May 2023, at 09:17, JonathanMilbank <jdmilbank(at)yahoo.co.uk> wrote:

 

 

 

 Yep, that's exactly how it broke and no doubt the same will happen again and again. The material thickness is too light. The LAA seems to have washed their hands of producing the items and handed it over to the Europa Club "for free". In reality a club member still has to purchase the STL 3D files for this mod, which I feel is a bit "off". Especially as the member also has the cost of the 3D printer and materials.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=510827#510827

JonathanMilbank

Joined: 14 Apr 2012
Posts: 388
Location: Aberdeen area

Posted: Sun May 21, 2023 1:04 am Post subject: Re: Fwd: Door latch shoot-bolt stop

My friend has the 3D printer and I've forwarded the files to him. Like me, he discovered that parts of the files are greyed out and there's a purchase price displayed. So neither of us could open the files and I'll simply wait until someone offers shoot-bolt stops for sale. In the meantime Superglue and tape are holding things together.

clivesutton

Joined: 23 Jan 2013
Posts: 187
Location: KENILWORTH

Posted: Sun May 21, 2023 3:47 am Post subject: Re: Fwd: Door latch shoot-bolt stop

RE:  PostPosted: Sun May 21, 2023 9:04 am    Post subject: Re: Fwd: Door latch shoot-bolt stop	Reply with quote

My friend has the 3D printer and I've forwarded the files to him. Like me, he discovered that parts of the files are greyed out and there's a purchase price displayed. So neither of us could open the files and I'll simply wait until someone offers shoot-bolt stops for sale. In the meantime Superglue and tape are holding things together.



Re: SM15833 as listed at:



http://www.lightaircraftassociation.co.uk/Airworthiness/Europa/247_Europa%20SM15833.pdf



and STL files located at:

https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops



Just to clarify on behalf of the Club, that the LAA have indeed donated the STL files to the Europa Club - to be offered to whoever wants to use them to print their own stops [at their own risk btw].  



The specific use of 3D printed stops in plastic to satisfy the 'AD' is not mandated, and anyone can make/fashion their own alternative stops from any 'suitably resilient material' (which i personally take to mean wood or metal).



I'm not aware that any aspect of the STL files sourced from the Europa Club link below are preventing their use.  Indeed this the first time i have heard of such an issue.  Perhaps someone who has already used them successfully can comment if they came across the same issue and who they overcame it?

vincegoddard(at)gmail.com
Guest

Posted: Sun May 21, 2023 8:07 am Post subject: Fwd: Door latch shoot-bolt stop

I’ve just built a small 3d printer and happy to print these for anyone not able to. I can do the in white ABS which is a bit better than PLA.



Vince

G-BWUP



Sent from my iPhone



[quote]On 21 May 2023, at 09:20, Alan Burrill <alanb(at)dpy01.co.uk> wrote:



--> Europa-List message posted by: Alan Burrill <alanb(at)dpy01.co.uk>



I am a Europa Club Member and have just downloaded the STL files at no cost from the club website so I don’t understand your comment;



 	  Quote: 	
		   	  Quote: 	
		  In reality a club member still has to purchase the STL 3D files for this mod, which I feel is a bit "off". <<

	
	


Alan

Sent from my iPad



 	  Quote: 	
		  On 20 May 2023, at 09:17, JonathanMilbank <jdmilbank(at)yahoo.co.uk> wrote:



--> Europa-List message posted by: "JonathanMilbank" <jdmilbank(at)yahoo.co.uk>



Yep, that's exactly how it broke and no doubt the same will happen again and again. The material thickness is too light. The LAA seems to have washed their hands of producing the items and handed it over to the Europa Club "for free". In reality a club member still has to purchase the STL 3D files for this mod, which I feel is a bit "off". Especially as the member also has the cost of the 3D printer and materials.





Read this topic online here:



https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fforums.matronics.com%2Fviewtopic.php%3Fp%3D510827%23510827&data=05%7C01%7C%7C741ebc3c985d443e082f08db59d44057%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638202540365315659%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=kp19yh3GJzZYwE%2FNNGbfUbqtjU0hyKZRsAS3CdEKWds%3D&reserved=0

vincegoddard(at)gmail.com
Guest

Posted: Sun May 21, 2023 1:09 pm Post subject: Fwd: Door latch shoot-bolt stop

As I’m still setting up my home built 3d printer I thought I would print a set of the shoot-bolt stops out to see how they came out. The white ABS+ I have used is a little more grainy than PLA but can be sanded and painted plus should be much stronger. Hear some shots of the print and finished items. If anyone wants these to try, I’m happy to post FOC in the UK.



[img]cid:751BD4A4-13EF-45E6-8335-7E48DC1C12B7-L0-001[/img][img]cid:D9FDDAF3-25A0-4481-9704-1CAF66DD699C-L0-001[/img][img]cid:D5E615F4-52DD-4695-906C-0C5CAC8B7044-L0-001[/img][img]cid:03DBAFDB-8F04-4797-94E6-A66A224178B2-L0-001[/img]



The fore-fairing has 31% fill as my LAA ones are hollow and one cracked. I have replaced this one with a self printed one but will need to see how they stand up.



Vince

G-BWUP



Sent from my iPhone



 	  Quote: 	
		  On 21 May 2023, at 17:13, Vince Goddard <vincegoddard(at)gmail.com> wrote:



I’ve just built a small 3d printer and happy to print these for anyone not able to. I can do the in white ABS which is a bit better than PLA.



Vince

G-BWUP



Sent from my iPhone



 	  Quote: 	
		  On 21 May 2023, at 09:20, Alan Burrill <alanb(at)dpy01.co.uk> wrote:



--> Europa-List message posted by: Alan Burrill <alanb(at)dpy01.co.uk>



I am a Europa Club Member and have just downloaded the STL files at no cost from the club website so I don’t understand your comment;



 	  Quote: 	
		   	  Quote: 	
		  In reality a club member still has to purchase the STL 3D files for this mod, which I feel is a bit "off". <<

	
	


Alan

Sent from my iPad



 	  Quote: 	
		  On 20 May 2023, at 09:17, JonathanMilbank <jdmilbank(at)yahoo.co.uk> wrote:



--> Europa-List message posted by: "JonathanMilbank" <jdmilbank(at)yahoo.co.uk>



Yep, that's exactly how it broke and no doubt the same will happen again and again. The material thickness is too light. The LAA seems to have washed their hands of producing the items and handed it over to the Europa Club "for free". In reality a club member still has to purchase the STL 3D files for this mod, which I feel is a bit "off". Especially as the member also has the cost of the 3D printer and materials.





Read this topic online here:



https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fforums.matronics.com%2Fviewtopic.php%3Fp%3D510827%23510827&data=05%7C01%7C%7C741ebc3c985d443e082f08db59d44057%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638202540365315659%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=kp19yh3GJzZYwE%2FNNGbfUbqtjU0hyKZRsAS3CdEKWds%3D&reserved=0

image3.jpeg

Description:

Filesize:

869.52 KB

Viewed:

59034 Time(s)

image2.jpeg

Description:

Filesize:

826.97 KB

Viewed:

59034 Time(s)

image1.jpeg

Description:

Filesize:

782.59 KB

Viewed:

59034 Time(s)

image0.jpeg

Description:

Filesize:

682.25 KB

Viewed:

59034 Time(s)

Area-51

Joined: 03 May 2021
Posts: 391

Posted: Tue May 23, 2023 1:27 am Post subject: Re: Fwd: Door latch shoot-bolt stop

Vince looks like the Extrusion Multiplier setting in your Slicer app is too high; try setting it between 8.5 and 9.5... the extrusion beads should be overlapping by about 5%-10%... Extruder temperature looks like it is also a tad too high.... Infill on the forward piece you can set fairly low at 15%, its not load or stress bearing part, will print a lot faster.



The LAA Aft piece is a thin Shell model; it has no interior thickness (i.e its not "watertight"), so printed as the stl is it could probably be crushed by hand and is not optimised for 3D printing only CNC machining. Not surprised at all to hear its breaking in the field. Could be wrong but appears that way...

vincegoddard(at)gmail.com
Guest

Posted: Tue May 23, 2023 3:00 am Post subject: Fwd: Door latch shoot-bolt stop

Thanks for the tips  



This 3D printing lark is all new to me so still learning/playing. I decided to build a Voron and use ABS so very much have gone into the deep end head first 



These ones I’ve printed will go out to Mike Harris who I hope will provide some feedback.



Vince

G-BWUP 



Sent from my iPad



 	  Quote: 	
		   On 23 May 2023, at 10:33, Area-51 <goldsteinindustrial(at)gmail.com> wrote:

 

 

 

 Vince looks like the Extrusion Multiplier setting in your Slicer app is too high; try setting it between 8.5 and 9.5... the extrusion beads should be overlapping by about 5%-10%... Extruder temperature looks like it is also a tad too high.... Infill on the forward piece you can set fairly low at 15%, its not load or stress bearing part, will print a lot faster.

 

 The LAA Aft piece is a thin Shell model; it has no interior thickness (i.e its not "watertight"), so printed as the stl is it could probably be crushed by hand and is not optimised for 3D printing only CNC machining. Not surprised at all to hear its breaking in the field.

 

 

 

 

 Read this topic online here:

 

 https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fforums.matronics.com%2Fviewtopic.php%3Fp%3D510848%23510848&data=05%7C01%7C%7Cbcc95431fa6d40df9fe508db5b70c9bb%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638204312200498596%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=V1gD7c%2FvRDSAFesivKXcfBTWKNJANYd8nxuCOOHsY0A%3D&reserved=0

Area-51

Joined: 03 May 2021
Posts: 391

Posted: Tue May 23, 2023 4:47 am Post subject: Re: Fwd: Door latch shoot-bolt stop

No problem... i was once where you are now... watch some youtube videos on slicing and print tuning; keep a journal of settings changes and results... you'll get there... PETG is probably going to get better results once you get the hang of it all, and PLA can be rock solid and robust also.... don't buy budget filament, it will drive you insane with frustration.

Rick Moss

Joined: 21 Sep 2014
Posts: 96

Posted: Thu Jun 01, 2023 11:47 pm Post subject: Re: Fwd: Door latch shoot-bolt stop

I believe that I now have an alternate design approved by the LAA. The approved mod document is currently being updated accordingly. It is fixed mechanically and chemically, and will be provided with a drilling template to fix it from the rear with no exposed external holes.



Details to follow.

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum