Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Stranded Steel Wire?

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

rparigoris

Joined: 24 Nov 2009
Posts: 797

Posted: Thu Mar 16, 2023 12:11 pm Post subject: Stranded Steel Wire?

Hi Group

Curious: We have 2 Amazon LED bars we are using for lighting in ceiling. Size is about 3/4" wide by 8" long. 

Anyway to get power to the front one, power runs from the back of ceiling to the front. This means the wire will run by our Dynon Magnetometer. When working on the ceiling panel on the bench, was using 2 small round button magnets to position some holes. Low and behold we found out they easily stick to the LED Wire!

Question: Why would they be using Copper Clad steel Wire on those LEDs? Lower Cost?

We just cut out most of the LED wire and are using Tefzel.

Thx. Ron P.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum