Matronics Email Lists :: View topic - Tri-gear nose wheel O ring size & NGO5 dimensions.

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Tri-gear nose wheel O ring size & NGO5 dimensions.

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

paul.the.aviator(at)gmail
Guest

Posted: Wed Apr 19, 2023 7:37 am Post subject: Tri-gear nose wheel O ring size & NGO5 dimensions.

Hello everyone,



My kit was missing the BS214 O ring and NG05 friction plate.  I'm at the point of giving up trying to get them from Europa and making them.  I need to know the thickness of the nylon friction plate, the size of the hole and the O ring thickness. 

My guess is 1/8" thickness of the material with a 1 1/8" hole and a 1" ID O ring , 1/8 thick.

If anyone can help I'd appreciate the information.

Thanks, Paul

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

budyerly@msn.com

Joined: 05 Oct 2019
Posts: 288
Location: Florida USA

Posted: Wed Apr 19, 2023 9:40 am Post subject: Tri-gear nose wheel O ring size & NGO5 dimensions.

Not quite Paul.



NG05 is 3.00 IN OD, 1.0 IN ID, PIN HOLE 1/4 IN Centered between ID , and OD edges or 0.5 inches from the edge.  ABS plastic.  I would machine from FRP G10 of 1/8 inch thick.  Easy to do on a drill press.  Buy the FRP, 3" Hole saw has to be 3" ID so I use a 3 1/8 OD instrument hole saw.  CLOSE ENOUGH

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Monoman

Joined: 01 Nov 2020
Posts: 22

Posted: Wed Apr 19, 2023 10:55 pm Post subject: Tri-gear nose wheel O ring size & NGO5 dimensions.

Hello Paul

I was at Swifts on Tues and picked up that very item.

I know that they have several more in stock as I saw them.

If you phone the Swift number and ask for Tom Hesp (Rebecca is away at present) you should be able to get it by return.



Sent from my iPhone



 	  Quote: 	
		   On 19 Apr 2023, at 16:41, Paul McAllister <paul.the.aviator(at)gmail.com> wrote:

 

 

 Hello everyone,

 

 My kit was missing the BS214 O ring and NG05 friction plate.  I'm at the point of giving up trying to get them from Europa and making them.  I need to know the thickness of the nylon friction plate, the size of the hole and the O ring thickness. 

 

 My guess is 1/8" thickness of the material with a 1 1/8" hole and a 1" ID O ring , 1/8 thick.

 

 If anyone can help I'd appreciate the information.

 

 Thanks, Paul

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

paul.the.aviator(at)gmail
Guest

Posted: Thu Apr 20, 2023 1:21 pm Post subject: Tri-gear nose wheel O ring size & NGO5 dimensions.

Thanks Mike!



On Thu, Apr 20, 2023 at 1:57 AM Mike <mike(at)nyumba.co.uk (mike(at)nyumba.co.uk)> wrote:



 	  Quote: 	
		  --> Europa-List message posted by: Mike <mike(at)nyumba.co.uk (mike(at)nyumba.co.uk)>

 

 Hello Paul

 I was at Swifts on Tues and picked up that very item.

 I know that they have several more in stock as I saw them.

 If you phone the Swift number and ask for Tom Hesp (Rebecca is away at present) you should be able to get it by return.

 

 Sent from my iPhone

 

 > On 19 Apr 2023, at 16:41, Paul McAllister <paul.the.aviator(at)gmail.com (paul.the.aviator(at)gmail.com)> wrote:

 > 

 > 

 > Hello everyone,

 > 

 > My kit was missing the BS214 O ring and NG05 friction plate.  I'm at the point of giving up trying to get them from Europa and making them.  I need to know the thickness of the nylon friction plate, the size of the hole and the O ring thickness. 

 > 

 > My guess is 1/8" thickness of the material with a 1 1/8" hole and a 1" ID O ring , 1/8 thick.

 > 

 > If anyone can help I'd appreciate the information.

 > 

 > Thanks, Paul

 

 

 ===========

 pa-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Europa-List

 ===========

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ===========

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ===========

 b Site -

           -Matt Dralle, List Admin.

 ="noreferrer" target="_blank">https://matronics.com/contribution

 ===========

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum