Matronics Email Lists :: View topic - a few issues: wing gap seal velcro doesn't want to stick wel

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

a few issues: wing gap seal velcro doesn't want to stick wel

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

jaydub

Joined: 07 Jan 2020
Posts: 74

Posted: Sun May 14, 2023 8:26 pm Post subject: a few issues: wing gap seal velcro doesn't want to stick wel

Two quick items I'm dealing with as I finish a new build:

I painted my plane with glossy paint. I put my velcro on the wings for the gap seal but it doesn't seem to stick very well. I tried a sample of contact cement but that didn't seem to do well either as it seems the glossy paint doesn't have "teeth" to grab into. Any ideas how to deal with that other than making the lexan hard gap seal or sanding down the paint?



My ailerons seem to have a lot of slop. Upon investigation the u-joint has slop (not from the bolt holes but the u-joint itself) and the upper control rod ends seem to have some slop too. Is this common with Kolb Firestars? Is this going to cause a flutter problem? I do have the ailerons counterweighted and balanced but I've never flown nor worked on an any plane with slop like this. It surprised me being a new build and does make me wonder if this is going to create any issues when I get to test fly.



Thanks,

Jay

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

stuart(at)harnerfarm.net
Guest

Posted: Mon May 15, 2023 5:34 am Post subject: a few issues: wing gap seal velcro doesn't want to stick wel

Jay,



Are you using the velcro supplied by the factory?  The stuff that came 

with my Firefly was really sticky but didn't get really stuck until it 

had quite a lot of pressure applied to it. It had been folded and the 

folds didn't want to come out at first but out in the sunshine when it 

warmed up a little I rubbed it all over again and it has stuck really well.



How long has your paint had to cure? Don't know if that matters but 

something to think about anyway.



Does the universal joint look like the one in the picture? If it does, 

and it has any play in it, I would replace it. Same with the rod ends on 

the tubes, mine had no perceivable slop when new except between the bolt 

and the eye but that was a very small amount.



I don't know how the joint is constructed under the red seal but was 

impressed with it and was told it would outlast the plane. The plans 

still showed how to make the torque tube joint with bolts but this is a 

much better solution. Maybe you got a bad one?



Stuart



On 5/14/23 23:25, Jay Dub wrote:

 	  Quote: 	
		   



 Two quick items I'm dealing with as I finish a new build:

 I painted my plane with glossy paint. I put my velcro on the wings for 

 the gap seal but it doesn't seem to stick very well. I tried a sample 

 of contact cement but that didn't seem to do well either as it seems 

 the glossy paint doesn't have "teeth" to grab into. Any ideas how to 

 deal with that other than making the lexan hard gap seal or sanding 

 down the paint?



 My ailerons seem to have a lot of slop. Upon investigation the u-joint 

 has slop (not from the bolt holes but the u-joint itself) and the 

 upper control rod ends seem to have some slop too. Is this common with 

 Kolb Firestars? Is this going to cause a flutter problem? I do have 

 the ailerons counterweighted and balanced but I've never flown nor 

 worked on an any plane with slop like this. It surprised me being a 

 new build and does make me wonder if this is going to create any 

 issues when I get to test fly.



 Thanks,

 Jay

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

100_7437.JPG

Description:

Filesize:

1.77 MB

Viewed:

4723 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum