finn.lassen(at)verizon.ne Guest
|
Posted: Sat Apr 20, 2024 3:06 pm Post subject: Which type washer for best electrical connection? |
|
|
I'm redoing the engine controller installation in my RV-4 to ensure
better ground paths for noise reduction.
Moving from (cheaper and lightweight plastic box) to cast alum box. 5 oz
increase, ouch!
I had been using star washers under screw heads and between PCB (ground)
and spacers and to air frame.
Now I'm wondering what is the best choice of washer. Perhaps
ribbed/serrated is better -- won't damage PCB ground traces and better
contact?
I think this picture best shows the ones I have:
https://www.jugenheimersupplies.com/ecomm_images/items/large/ribbedwasher.jpg
The other question is whether I should put washers between bottom of box
and the RV-4 side skin it's being mounted to.
IĀ know I beingĀ anal here but figure might as well do everything I can
can to get good paths.
Finn
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|