nuckollsr(at)cox.net
Guest
|
 Posted: Thu Oct 26, 2006 7:17 am Post subject: Quick_n_Dirty_Breakout |
 |
|
Yesterday while working a problem on a bizjet, I needed
to get my 'scope on a couple of pins in a d-sub connector
while the system of interest was being aligned.
The nearest 9-pin, d-sub breakout box was 3/4 of a mile
away so I went to the junk bins and built a quick-n-dirty
9-pin, dsub-breakout harness. See:
http://www.aeroelectric.com/Pictures/Tools/Quck_n_Dirty_Breakout.jpg
This is at least one, inexpensive way to acquire test
tools for your devices fitted with d-sub connectors.
Digikey, Jameco, MP_Jones, Hosfelt, et. als. are good
sources for the "ribbon cable munchable connectors."
Bob . . .
---------------------------------------------------------
< What is so wonderful about scientific truth...is that >
< the authority which determines whether there can be >
< debate or not does not reside in some fraternity of >
< scientists; nor is it divine. The authority rests >
< with experiment. >
< --Lawrence M. Krauss >
---------------------------------------------------------
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
