Matronics Email Lists :: View topic - CJ6A

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

CJ6A - overvoltage module update

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

brian

Joined: 02 Jan 2006
Posts: 643
Location: Sacramento, California, USA

Posted: Sat Jan 28, 2006 8:06 am Post subject: CJ6A - overvoltage module update

Bob is putting together a kit for the over-voltage protection module and

had a question that I thought I would direct to all of you.



The module has two status lamps, one for low-voltage, one for

over-voltage trip, and a test/reset button. Would those of you who are

interested in this module please let me know if you would like the kit

to include a labeled placard along with the bulb holders, bulbs, and the

push-to-test/reset button.



I have attached a PDF of what the placard would look like.



BTW, the largest part is the relay. The actual circuit module is only

about twice the size of the DB-9 connector used for all the wiring. (A

DB-9 connector is the type used on PC serial ports in case you are

wondering how big that is.)



I still need to find a CJ6A with a stock generator here in central

California to use as a test bed. The wiring changes are very small, just

get power from the bus and break the field wire somewhere to insert the

relay. If you don't want to keep the module for some reason it would

only require one splice to put everything back the way it was.



BTW, Bob will not release the kit until it has been flight-tested. He

doesn't believe in "vaporware" products that promise and then don't deliver.



-- 

Brian Lloyd                         2243 Cattle Dr.

brian-yak at lloyd dot com          Folsom, CA 95630

+1.916.367.2131 (voice)             +1.270.912.0788 (fax)



I fly because it releases my mind from the tyranny of petty things . . .

- Antoine de Saint-Exupery

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

9011-301-1_Placard.pdf

Description:

Download

Filename:

9011-301-1_Placard.pdf

Filesize:

28.65 KB

Downloaded:

566 Time(s)

_________________
Brian Lloyd
brian-yak at lloyd dot com
+1.916.367.2131 (voice) +1.270.912.0788 (fax)

I fly because it releases my mind from the tyranny of petty things . . .
- Antoine de Saint-Exupery

wlannon(at)cablerocket.co
Guest

Posted: Sat Jan 28, 2006 10:13 am Post subject: CJ6A - overvoltage module update

Hi Brian;



Great progress. I hope you can find someone in your area to with a stock 

generator control CJ to help out with the testing.

Am I correct in  assuming the indicator panel is separate from the actual 

unit? If so I would personally not require that since I have a stock of MS 

style PTT warning lights, switches and facilities for placard manufacture. 

All I would need is instructions to hook it all up.



If you can give exact dimensions for the placard I will make some for you at 

no charge. These would be made from 1/32" or .020" engraving plastic and I 

will install attaching adhesive tape.



Cheers;

Walt



---

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

brian

Joined: 02 Jan 2006
Posts: 643
Location: Sacramento, California, USA

Posted: Sat Jan 28, 2006 10:41 am Post subject: CJ6A - overvoltage module update

Walter Lannon wrote:

 	  Quote: 	
		   Yak-List message posted by: "Walter Lannon" <wlannon(at)cablerocket.com>



 Hi Brian;



 Great progress. I hope you can find someone in your area to with a

 stock generator control CJ to help out with the testing.


	


Here's hoping. There are a couple around I haven't approached directly yet.



 	  Quote: 	
		   Am I correct in  assuming the indicator panel is separate from the

 actual unit?


	


Yes. The module itself is smaller than 1" square. The relay, its socket,

and associated parts, are only slightly larger than that.



 	  Quote: 	
		   If so I would personally not require that since I have a stock of MS

 style PTT warning lights, switches and facilities for placard

 manufacture. All I would need is instructions to hook it all up.


	


No problem.



 	  Quote: 	
		   If you can give exact dimensions for the placard I will make some for

 you at no charge. These would be made from 1/32" or .020" engraving

 plastic and I will install attaching adhesive tape.


	


Well, Bob is kitting up the whole thing so it comes with all parts and

instructions. He is aware that the CJ6A already has a low-voltage

indicator (the red "generator" light) but he also plans to use this

module for other aircraft. You probably ought to make your offer

directly to Bob ("nuckollsr at cox dot net").



So I do need a good idea as to the desirability of the "control panel".



-- 

Brian Lloyd                         2243 Cattle Dr.

brian-yak at lloyd dot com          Folsom, CA 95630

+1.916.367.2131 (voice)             +1.270.912.0788 (fax)



I fly because it releases my mind from the tyranny of petty things . . .

- Antoine de Saint-Exupery

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Frank

Joined: 10 Jan 2006
Posts: 69

Posted: Sat Jan 28, 2006 12:08 pm Post subject: CJ6A - overvoltage module update

Look good to me, Brian.

Frank



--

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum