Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

701 Elevator Control Cable Routing

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List
View previous topic :: View next topic  
Author Message
planejim(at)bellsouth.net
Guest





PostPosted: Sat Jan 13, 2007 7:30 am    Post subject: 701 Elevator Control Cable Routing Reply with quote

701 Builders,

I'm helping a friend with his 701. His question is: What do I do about the
Elevator cables contacting each other in the aft fuselage area when rotating
the stick to the right as if applying full right Aileron? He mentioned
something about a Bungee called for in the plans ( Please note I am 160
miles from him and have not actually witnessed the "problem". )

I suggested that he should wait until the wings and Flaperons are installed
( which he is about to do ) and with a protractor installed to assure full
Flaperon travel and then see if there is an interference problem with the
cables contacting each other.

I understand this problem is caused by the geometry of the Elevator
bellcrank being mounted on the right side at the aft end of the control
stick.

Is this something to be concerned about or is it just a minor thing? Thanks
for your replys in advance.

do not archive

Jim Hoak 601HD- 912UL-538 hours.


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
JohnDRead(at)aol.com
Guest





PostPosted: Sat Jan 13, 2007 8:34 am    Post subject: 701 Elevator Control Cable Routing Reply with quote

Hi Jim:
 There is a bungee described in the drawings that is required to prevent the cables from touching one another.

Regards, John Read
Building ch701 in Colorado
[quote][b]


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group