aurbo(at)ak.net
Guest
|
 Posted: Fri Jan 19, 2007 10:02 am Post subject: more direct method for designing electrical system |
 |
|
Larry,
less than a month ago I felt like you do right now, hopelessly lost.
Buy the aeroelectric connection. Read this forum. For a simple electric system, follow the Z-11. It really isn't hard. Just figure out where your battery is on the drawing and in your airplane and start running one wire at a time. Make a copy of the Z-11 (drawing out of the aeroelectric book) and every time you run a wire color it in with a high lighter. When all the lines are done you have a working electrical system.
Also, take a look at your copy of the drawing and figure out what switches you need and call up or web order from B&C or Stein.
Or: you could just order Van's pre-made wire harness, but i bet before you get it installed you will take it up and use the wires to do the Z-11. I know because that is what I did.
Don't sweat it, you can do it. Or just open up your wallet and hire someone to do it.
Mike Ice
RV-9, wiring, wiring, wiring
---
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
