Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

External Graphics

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

SteveD

Joined: 09 Jan 2006
Posts: 50

Posted: Sat Jan 20, 2007 2:13 pm Post subject: External Graphics

I'm rebroadcasting this email it didn't seem to make it to the list.



Steved.



I’m one of the three builders of XS Tri-Gear G-CHOX. We will soon be having the aircraft painted shiny white, and are starting to think about the exterior design graphics. Some questions for the forum:



1. Has any one used a UK graphic designer, and what were the costs and results? 

2. Can anyone recommend a UK graphics company to produce the transfers or adhesive-backed vinyl decals? 

3. What are the things to watch out for? 

4. The ‘Registration Letters’ kit sold by Europa 04 has letters which are significantly smaller than those mandated by the CAA in CAP 523. Is this a problem that one can ignore as most seem to? 

5. The Europa Decal Design Kit sold by Europa 04 (as shown on the demonstrator G-KITZ) assumes no registration letters on the fuselage side, only on the tail fin. This would be totally unacceptable to the CAA, wouldn’t it?

 



Any other thoughts or advice would be welcome.



 



Goff Moore



goffmoore(at)aviators.net

G-CHOX Build Group: Peter Field, Ian Swankie, Goff Moore.



www.gchox.co.uk

Visit -  www.EuropaOwners.org

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Brian Davies

Joined: 10 Jan 2006
Posts: 124
Location: uk

Posted: Mon Jan 22, 2007 1:42 am Post subject: External Graphics

Steve,



I notice nobody has replied to your request for information on graphics so I

will have a go.



I used the factory registration letters and there has been no problem with

the size.  There is a paragraph somewhere in the regulations that gives some

relief on size if it is not practical to fit the full size.  The CAA don’t

like the registration on the fin but there are a few aerobatic aircraft

flying around with this location.



Vehicle graphics supply is a  very crowded market so you should not have too

much trouble finding a local supplier.  I used a small company in Horsham,

my nearest town, who worked off a rough draft that I produced and they came

to my house and fitted the decals for me.  My design was simple and just one

colour.  There is no doubt this kept the costs down.   There were 8

individual decals and the total cost was only UKP 170. I have attached a

picture so that you can see what I got for the money.



I was very satisfied with the result.



The company was Signs first. Tel 01403 240008



--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

graphics_1.jpg

Description:

Filesize:

294.77 KB

Viewed:

168 Time(s)

grahamsingleton(at)btinte
Guest

Posted: Mon Jan 22, 2007 10:44 am Post subject: External Graphics

Steve

I might add you can have your letters laser cut too, I had mine done 

with one side leaning forward and the otherside leaning back to match 

the sweep back of the fin. Bolt upright letters don't lok right to me. 

Neither does bolt upright seating position, but Ivan didn't listen 

unfortunately for those of is with delicate backs

Graham



Brian Davies wrote:

 	  Quote: 	
		   Steve,

 

 I notice nobody has replied to your request for information on graphics so I

 will have a go.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

NevEyre(at)aol.com
Guest

Posted: Mon Jan 22, 2007 12:08 pm Post subject: External Graphics

Steve,

 Ask for 3M or Fascal vinyl, most of the other makes will fade in a very  short time, these two brands are colour fast for 8 years, guaranteed.

 Cheers,

 Nev.

  [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

topglock(at)cox.net
Guest

Posted: Mon Jan 22, 2007 5:39 pm Post subject: External Graphics

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum